Camera not woking in video mode

After updating my software on my sony xperia u st 25 i...........my camera is not woking in video mode

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 80% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

Similar Messages

  • Iphone 5 small purple spot when using back camera, not showing in video mode

    Hi all,
    Had taken some pictures this week in the street and wasn't noticing anything major. Tonight I needed to take some pictures here at home and I noticed on one picture a smallish weird spot. Went back to the place I took it to make sure it wasn't there (on the floor) but it wasn't.
    I then proceeded with using the camera and I can see the spot stays there wherever I move with it. When I zoom, the spot zooms away with it making it possible for a clear picture. When I put the video mode on, there's no spot whatsoever. When I use the front camera, there is no spot as well.
    As it doesn't show up in video mode, I'm assuming it has nothing to do with the lens but maybe more software/hardware or iOS related, or am I wrong?
    Is there anything to be done about this? From what I found online people said to turn off the phone and back on, tried it to no avail.
    Can always take it back to the shop but I'm assuming this will make it be sent back to apple repair centers etc. so it might take a while to get it back for a relatively simple issue, nothing that can be done any other way?

    I have the same issue - perhaps not exact but extremely similar.  In photo mode, there is a small purplish speck, which I initially thought as dust or something, and of course it ends of in photos taken.  However, this speck is not present in video mode, meaning there is no dust, but some sort of artifact on the photo processor or something.  Either way, itsa product defect - I plan on seeing if Apple will support this and replace thephone.....

  • HT6162 In control center on IOS7.1 flashlite is not working, camera not woking only the frontal camera the rear camera stay black

    Hi i´m new in this IOS thing but i get a message in itunes of an update of IOS 7.0.6 to 7.1 so i updated but my phone stop working the camera just take 2 videos and the camera is not working, well at least the rear cam stay black the front cam works, and, in the control center the button of flashlite do not work i push the button like 4 times the LED do not turn on then i restart the iphone and now the button is disabled so is this a bug or just a faliure of the IOS update???

    Welcome to the user to User Technical Support Forum provided by Apple
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • Macbook built-in Camera Not Found: Facebook video chat

    Hi Experts,
    I purchased Apple Macbook Air 2013.
    The buit-in camera is not detected while facebook video chat.
    But camera works with Skype video calling. Camera is also detected while I want take a picture in facebook.
    I already installed latest available Adobe Flash and gave permission to "ask" for camera to be used in the Adobe Flash Player properties from "system Preferences".
    I have gone through all realted threads, and none of them seem to work for me. Built in camera is not detected during google hangout video calling also.
    I suspect I have to "allow" the camera to use for facebook and google plus chat, but it does not give me prompt as it gave while I accessed facebook "take a photo".
    Can any one help?
    Regards,
    Sujit.

    Try resetting the SMC: Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support.

  • Camera not working (No video capture devices were found)

    Hi,
    Macbook air late 2010 upgraded to 10.9.2 camera not detected, it was working 2 minutes before upgrade.
    system info states - No video capture devices were found.
    I have re-installed 10.9.2 clean using cmd-r on startup,
    repaired permissions,
    reset SMC
    still getting - No video capture devices were found.
    anyone got any advice,
    Thanks,
    Charles

    Hi,
    Ok switched my Macair on to re-install 10.9.1, thought I'd give facetime one last try and its working
    So the way I fixed it was to uninstall all 3rd party video driver (like airparrot).
    This did not fix problem, booted up holding the Command-R keys.
    Re-installed Maverick
    Restarted
    Camera was still not working
    Downloaded latest Skype
    Ran Skype - no camera detected in preferences
    Repaired permissions using Disk Utility
    Left it on for few hours
    Restarted next morning, opened Facetime, now everything is working
    Charles

  • Ipad camera is blocked in video mode. I cannot pass it to photo

    When wanting to use IPad camera, the camera is in video mode and I cannot pass it to photo.

    Swipe up or down to select photo option.

  • Front facing camera not working for video chat on Revolution

    How come the front facing camera doesn't work on Tango? I wanted a new phone with FFC to use on Tango and for when Skype goes video on phones and it seems it don't work on Tango. Is it just Revolution or is it the same on all phones? I don't need a FFC phone to take pics of myself I have had no problem doing that on other phones, would love the feature to do what it is supposed too.

    AdamE_VZW wrote:
    Hi bulldog69!
    To answer your question, some of those video chat applications have additional 'plug-ins' that need to be downloaded from the Market as well. Just search for "tango" in the Market and see if anything pulls up. If this is not the case, try to uninstall and re-install the application from the Market.  I recommend trying another video chat app to see if that works as well. If you can take photos and video with the FFC, there's no issue with the device.
    Hope that helps! Keep us posted.
    Thank you!
    Well we have two Revolutions and i tried the uninstall and reinstall and no good. Couldn't find any plug ins.
     What other video chat apps do you know of that might work? Tried Fring and tha was junk. Thanks for any of your help that you give me

  • Can not see the video mode is not supported attached presentation

    ipad problems connecting the tv with netflix

    http://www.telestream.net/flip4mac/overview.htm
    The free version should be all you need.

  • How to avoid crop in camera video mode? (iPad 3)

    When you switch the built-in camera from stills to video mode, a whole lot of the image is cropped. Why is that and is there a way to get the cropped area back in video mode?
    I wouldn't mind using a different app if necessary.

    > 3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
    >
    >
    >
    See "Appendix A: Event ID Codes" in the PSCS4 JavaScript Reference pdf file that
    comes with PSCS4.
    -X

  • BDC not working in Background mode

    Hi All,
    I have created a BDC. It is working fine in forground mode but not woking in background mode. Please any one know what could be the problem.
    thanks,
    Shweta

    Hi,
    I think there is some field in your screen is disabled for input. As it will not through you error.
    Please run you BDC in foreground mode and check it and see if you get any message. it will be a sucess message.
    this thing happend to me also as my ship to party was disbled in one of screen of VA02.
    thanks,
    Sarbpreet

  • Zoom while in video mode.?

    did they take out this feature?
    i remember before seeing peoples videos online of them zooming while recording a video. and im pretty sure i have at one time when i first got my iphone.
    can anyone tell me how to zoom while recording video or if they took it out? becouse im stuckkkk

    You can't. Zoom is not available in video mode. What you saw on online was either a third-party app from the app store or a jailbroken phone.

  • HT1414 My new ipad mini does not allow me to switch between modes in the built-camera app. It is stuck on video mode. Can anyone advise?

    My new ipad mini will not let me switch between modes when using the built in camera app. It is stuck on Video mode. I am unable to take photos, although I could when I first used it. Could this be a fault with the pad or with the new 7.0.4 update? Can anyone help please?

    Have you tried to force quit the app? Double tap the home button. Scroll sideways if needed to see the icon and preview for the camera app. Flip that app up and off the screen to close it then single tap on the home screen preview or single tap the home button to exit the mode.
    Try your camera app again and see if you can switch modes.
    When you switch modes, you do have to drag the words, not just tap on the video word, if that makes any sense. When you try to go from video to photo, do you try to drag the photo word to the front?

  • I Can No Longer Switch My Camera to Video Mode

    After my ipad had a new update recently, I can no longer switch my camera from camera to video mode. I lost all of my pictures and videoes as well. How can I get them back and have my camera working like before? It does switch from back to front, but the video button does not work.

    Try sliding the words "Video" "Photo" "Square" instead of tapping them. Weird, I know, but it works.

  • Video mode not supported - after installing Lion

    Hi All,
    I installed the new Lion OS on my Mac Mini, all went great and clean.
    But,
    after 2 days of playing with the new OS cool new features I shutdown the Mac Mini and a day later when I started it my TV (Philips HDMI) could not recognized the video format and a message from my TV said "Video Mode Not Support" (I use the HDMI output to an HDMI port on my TV)
    I went to my apple reseler and they reset my PRAM.
    When I plugged it again at home it was working again.
    Then I restarted it to check all is good... and again "Video Mode Not Supported"
    It never happen with OS X Snow leopard. so I guess something is not working as it need to on the new Lion version.
    I'm not sure if there is a workaround until Apple will release a fix but if someone know how to fix it, ill be happy to know...
    thanks
    the hard part is that I dont have a wired keyboard or another display so I must go to Apple to get it solve each time it happens
    Eran

    Hi Markus.
    Im trying the update software once in a while but still nothing... I'm keeping my MacMini up and runing cus I know that if i will shout it down it will not come back with the right display driver.
    anyhow, it did happend once that I shut it down and then it didnt work again after it came back on, so I played with it a little, i took it out of the power outlet and try a few clicks on startup like alt ctrl P and R and cmd + F1 and few other thing and after a few tries it did work... I have now idea why and what actually made it work again but one thing I can say its that the new Lion version have anything it needs in order to work curectly the problem is that somewhere along the startup process (and now im gussing) the OS select a wrong driver for the attached display (in our case Philips) and send a video format to the display that cant be recognaized by the display.
    I realy hope pple will issue a fix to this problem soon!! cus in adition to that I have some zoom issues too which im not sure where it is coming from and if it have to do with our issue.
    Anyway we all hope it will be solve soon.
    Have a good one... Eran

  • When I toggle the info button in video mode the electronic level on my Canon 60D is not showing up

    I can get it to show up in camera mode but not video. Is there something I need to check on the menu in video mode or??? 
    Thanks!

    Hi evanjs,
    While the electronic level is available when you're setting up a movie shot, it disappears when you begin shooting your movie.  After you stop shooting, you may bring the level back by pressing the INFO button.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for