Camera not work ipad 4generation before ios8 update

Camera not work ipad 4generation before ios8 update
PLease help

Hi Hellside,
Welcome to Apple Support Communities.
It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
iPhone: Hardware troubleshooting
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
I hope this helps.
-Jason

Similar Messages

  • Usb tethering not working in iphone5 after ios8 update

    Hello,
    I have upgraded my iPhone 5 to iOS 8.  My personal hotspot is not working anymore with my laptop.  There is a personal hotspot section under cellular in settings, however i am not sure what to do!
    Kindly help on the same

    Hi Pathikrit B,
    Welcome to the Apple Support Communities!
    Please review the following article for information on how to set up your Personal Hotspot.
    iOS: Understanding Personal Hotspot
    Have a great day,
    Joe

  • Camera not working ipad

    Recently, the camera on the back of my ipad 2 has stopped working.  It only shows a black screen.  The camera on front works fine.  I have already tried the 2 button reset without success.

    Reset your Ipad.
    Press the homebutton and the powerbutton until you see the apple logo.

  • IPhone 4S Camera not working at all since last update

    Please Help!!! I use my iPhone camera as my primary camera and so does my wife. We are both having the exact same problem. No matter which way we try to use our cameras, whether through text messaging or directly from the camera app, when the camera starts up the screen is black. I try to kill the app and then restart it and on restart it appears to be fine, but when i click the shutter button to capture the pic the app crashes and takes me back to my home screen.
    I've tried restarting my phone and nothing works. Please fix this bug or tell me what to do!
    HELP!!!

    Please fix this bug
    This is a user-to-user tech support site.  Your problem is not a "bug" - it's in your phone.
    Try basic troubleshooting steps as needed:
    1. Double click the home button to show the recently opened apps.  Slide the preview screen of the Camera app up to close it.
    2. Reset phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
    3. Restore the iOS using iTunes, also restoring a backup
    4. Restore the iOS as new, without using a backup
    5. If restoring as new doesn't help, there is a hardware failure that requires evaluation by Apple or an Apple authorized service center

  • Camera not working after 4.3.5 update.

    frozen unresponsive and shutter stays closed.  any suggestions?

    Try the standard fixes:
    Reset
    Restore from backup
    Restore to factory defaults/new iPod
    Also see this long-running discussion on stuck shutter:
    Camera shutter issue: Apple Support Communities

  • My camera not working with tango

    My camera not working on Tango since i update my iphone 5s to IOS 8

    Delete and reinstall the app.

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • Web camera not working after sowtware update

    HI, there
    My macbook's  (core duo)camera not working after installing show leopard, can you advice if I need some other updates or anything to make it work?

        Hi purduejatt,  I apologize for the delayed response as I understand how important it is to have a working camera!  I would suggest clearing the data in the Camera application.  Press Menu>Settings>Application Manager>All>Camera>Clear data.  Please keep me updated on the status as I would be more than happy to provide additional support.
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWsupport

  • Safety Cameras not working on E7 with new map upda...

    Since updating the maps on my Nokia E7 yesterday the Safety cameras are no longer showing. Traffic info is working fine. I restarted the phone, have the switched cameras off and back on, I have deleted the camera data file called 1.0.0.602europe.cdt in the E\Cities\diskcache\safetyspots directory on the mass memory of the phone and restarted maps to reload the file, but still not showing cameras.
    They were there before the update when opening Nokia Drive
    I would be obliged if anyone has any ideas.
    Solved!
    Go to Solution.

    rsjuk wrote:
    I have deleted the camera data file called 1.0.0.602europe.cdt in the E\Cities\diskcache\safetyspots directory on the mass memory of the phone and restarted maps to reload the file, but still not showing cameras.
    Whilst deleting this is fine, you would need to reload previous version such as 1.0.0.579.europe.cdt and make sure that Nokia Maps application remains "Offline" otherwise it will reload 1.0.0.602.europe.cdt. This has happened before, but issue may not be rectified quite so quickly as Symbian a fairly low priority now.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Macbook camera not working

    my macbook air camera not working
    after i updated to 10.8.5
    i have downloaded and installed the supplemental also even then my problem not resolved

    Hashim Jamal wrote:
    i have done reinstallation of os maverics
    and checked camera according to troubleshoot
    still not working what should i do?....
    Use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Hashim Jamal wrote:... i took my laptop to a apple authorised service department...
    You did the right thing.
    Hashim Jamal wrote:... apple authorised service department ... are asking for 750usd to get it replaced
    what should i do?
    If you like the Mac you have and need the built-in camera, spend the money.
    If you want a different computer, now is a good time to trade.
    If cost is a concern, consider a Mac compatible external camera. Take your MacBook Air to the store when you shop, and try the external camera you want to be certain that it works before you buy.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Why AirPrint is not working on my ipad4 after updating to IOS 8.1?

    WWhy AirPrint is still not working on my ipad4 after updating to IOS 8.1

    Hello mmpreston,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with AirPrint on your iPad please follow the directions outlined below.
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    About AirPrint
    Take care,
    Alex H.

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • Apple 4 camera not working

    My iphone 4 camera not working it opens afters closing 2-3 times before but its can not open now i totaly reset,restore,formet and change software version but still now its not open that is 5-6 month now please tell me what to do now

    There is no Apple here, this is a user to user forum.  When you said you restored, then you restore as NEW?
    If you restored as New and still the problem persiist, then it time to take a trip to the Apple store.

  • HT1222 hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

    hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?

    I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.

Maybe you are looking for