Camera not working macbook pro

This is crazy. I just went to turn on my photo booth to take a picture of something. And it tells me there is no camera detected. I don't think i have used the camera since i upgraded to mavericks and that was months ago. and there is nothing in system prefs about there being a camera to detect.

How to Troubleshoot iSight

Similar Messages

  • Camera not working macbook pro retina

    Camera not available - message in face time
    Camera doesn't work in Skype
    What should I do?
    Thanks

    How to Troubleshoot iSight

  • Wifi, Bluetooh and iSight not working MacBook Pro

    I have a mid 2009 MacBook Pro Unibody. 8Gb Ram  Mavericks OS. I powered down one evening, everything normal.  Next day I rebooted it to find that I had lost Wifi, Bluetooth and isight.  Oh, and the fan runs at high speed constantly.
    Ptheise computer is running OK and I can connect to network via ethernet.
    Messages are:
    1. Wifi - no hardware installed
    2. Bluetooth - not available
    3. iSight - there is no connected camera.
    I have rebooted in safe mode, reset NVRAM and SMC, left it off for 30 hours. Tried an AHT. None worked.
    Have checked system information.  Responses are:
    1. WiFi
    Software Versions:
      CoreWLAN:          4.3.2 (432.47)
      CoreWLANKit:          3.3.2 (332.36)
      Menu Extra:          9.3.2 (932.35)
      System Information:          9.0 (900.8)
      IO80211 Family:          6.3 (630.35)
      Diagnostics:          3.0 (300.40)
      AirPort Utility:          6.3.2 (632.3)
    2. Bluetooth
    No information found
    3. Camera
    No video capture devices were found
    I'm presently redownloading Mavericks to do either a reinstall, or clean install, but before I do this can anyone suggest a solution?  Computer back up is up to date.
    NB: I live in Botswana where there are no Genius bars, nearest reliable service is in South Africa and downloads are VERY slow.
    Thanks in advance

    Restarting Mac may fix it.  Otherwise: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.8.1/span>

  • HDMI output not working MACBOOK Pro (Oct 2014)

    I am trying to get another screen connected to my MBP, I have tried numerous screens and cables to achieve this, but I can not get it to work.
    Is there a on/off or disable HDMI output on the MBP?
    I have used various screen, which i know work. And a HDMI to DVI and HDMI to HDMI cables to screens . I know the cable and screens work as I use them at work on a daily basis.
    All I get is "No signal connected".
    Is there any diagnostics or tests I can do?
    Regards,
    Rowland

    I have a 13" MacBook Pro.

  • Flashing Question mark: New hard drive not working Macbook Pro late 2008

    After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
    Heres the device.
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
    I put the old drive back in and it works fine.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
    Appreciate your help
    Gary

    Sorry I think you may be confused.
    I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
    I replace the macbook pro hard drive with the seagate drive:
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
    Does anyone know what the problem could be as the hard drive is brand new.
    Appreciate your help
    Thanks, Gary

  • WEBCAM in Vista is not working Macbook Pro

    i think the webcam in not known by vista ,can you help me with new
    update driver or solution which i can use the built in webcam
    in vista also , My laptop is Macbook pro and i purchase that
    about 1 year ago
    is possile send reply to my email [email protected] also

    Dear Jason
    thanks but my boot camp is ver2.2
    and when i try to install Ver 3.1 ,it comes with massage
    that at first i should have ver3 then i can upgrade to 3.1
    the link which you gave me is Ver 3.1 Upgrad only
    so can you help me with that also consider my windows is vista32bit ultimate
    when i want to use yahoo masanger two time green light for web cam
    turn on and off then it shows that it can not find the webcam
    also in micrsoft photo gallery when i want to import from
    camera or webcam it can not find the webcam also in control panel
    in camera section there is no camera finded
    so please give me you advise
    thanks

  • Audio not working MacBook Pro 15''

    My internal speakers are not working and seem not to be recognized by the OS. I am running Lion. Under Preferences>Audio there isn't any option for the internal speakers. Headphones are still working.

    I had the same problem and after a bit of research discovered that the line in is not getting enough input from an unpowered set of headsets.  ALSO, the mic level was set too low and so nothing was being picked up.
    Solution:
    I have a Thunderbolt Express Dock (expensive I know but very handy) and plugging in through the express dock with the mic level up works great.
    Alternatively, I also have a USB Headset Connector that comes up as a seperate device and also is able to take inputs.
    Finally, if neither of these work, I found that the earth chassis on my Macbook Pro 15" was a bit unpredictable.  I removed the base cover, cleanes the contact points (little silver spring loaded buttons on the edge of the main board) and where the contacted the cover and this also improved things.
    Regards,
    David

  • Camera not working- Macbook retina

    Hello,
    I just got a new Refurbished Macbook Pro i5 with Retina.
    After 2 days, the camera stopped working. I brought it to the Apple store, but before I had a chance to show them the issue, the camera started working again and apparently there was no sign of the error in the log. A day after, I tried to open facetime and photo booth again and I get those error messages in the log:
    Jul 17 21:27:51 FaceTime[1330]: 21:27:51.196916 com.apple.AVConference: AVConferencePreviewServer setCaptureCamera got cameraID 0
    Jul 17 21:27:51 com.apple.SecurityServer[15]: Session 100043 created
    Jul 17 21:27:53 Photo Booth[1335]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
    If anyone can help me out it would be greatly appreciated!
    Thanks!

    levana91 wrote: ... if they dont see it broken can they help?...
    Yes, but they may also see it broken, even it they need to keep it for a period of time for testing.
    Take your MBP back to the Store with the info you posted above.  With that info, they can determine whether your new Mac needs service or replacement while it is still in warranty.
    Errors (and proper functions) that occur "randomly" are indications of intermittent faults that Apple Service Technicians can find and correct more efficiently than anyone else on earth.
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • Microphone and Line In Suddenly Not Working Macbook Pro 15" Early 2011

    Yesterday without warning, my internal mic stopped working on my Macbook Pro 15" Early 2011. I discovered this when the recipient of a Skype call couldn't hear me, and verified that the mic was not getting any level in the Sound system preferences pane. There is also no microphone input happening when I plug in my iPhone headset to the headphones jack. The audio out seems to be fine. I had to use a USB microphone to get any sound into the computer. I used the microphone just a few days ago without any issue.
    I've already tried:
    Rebooting
    Resetting PRAM
    Creating second account to test audio
    And none of the above had any affect. Other note: I recently had the GPU of this computer replaced under Apple's special replacement plan. Anything else I should try before making an appointment to have the hardware looked at?

    pushyourmind,
    If you’re up-to-date with Software Update, then you have the correct firmware installed. If you’re running 32-bit Windows 7, then Boot Camp Support Software 4.0.4033 contains the correct drivers; if you’re running 64-bit Windows 7, then Boot Camp Support Software 5.1.5621 contains the correct drivers. Which ever support software corresponds to your version of Windows 7, try downloading the corresponding .zip archive and following the installation instructions on the corresponding link above when booted in Windows.
    Boot Camp 5.1 supports Windows 8.1 on your model MacBook Pro if you’re running OS X 10.8.3 or newer. Earlier versions of Boot Camp and older versions of OS X don’t support Windows 8.1 in Boot Camp on your model MacBook Pro.

  • Bluetooth not working macbook pro 2011, AHT found nothing

    My macbook pro 2011 has been having some issues with bluetooth. The system doesn't even recognize as having bluetooth hardware. I went under the hardware profile and it actually says No information found under bluetooth. I was able to do a full hour diagnostic test using Apple Hardware Test and everything was all clean. I'm not sure if this is Yosemite related or not. I definitely remember using my bluetooth enabled keyboard and mouse on my system before I upgraded to Yosemite. Wifi works fine. I've tried resetting PRAM, but nothing. I'm at a loss, not sure if there is anything else I can do.

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Speakers not working - Macbook Pro

    Hi,
    Am facing this issue from today, that speakers on Macbook Pro are not working, when am MAC OS. When I boot into Windows 7 (Bootcamp), the speakers seems to be working.
    I have checked the mute key, to ensure the MAC is not on mute mode.
    How can I debug this issue?

    Resetting Mac's PRAM and NVRAM did not helped.
    Then I checked Sound settings in System Preferences and in Ouput Tab, the value selected for Sound Output was Apple TV. Probably it got changed when I was streaming the conten yest. using Apple TV.
    I changed it back to Internal Speakers and and got the sound back on speakers.
    Thanks for all your assistance.

  • Multi-touch trackpad gestures not working (Macbook pro 15" unibody)

    Hi,
    I have a 5 day old Macbook Pro and since yesterday ive been having an intermittent fault with the 3 and 4 finger gestures on the track pad. They stop working and don't even work on restart. the computer needs to be shutdown then turned on again for it to work. When it wasn't working, i created a new user account and switched to that and it worked fine, when i switched back to my account it carried on working fine as well. I do have parallels installed with windows xp but use that rarely and the problem hasn't occurred when i have that on (only reason i mention is is that i noticed the fault a few hours after installing parallels). One of the times the problem occurred is when the computer came out of standby.
    Is this a software issue or hardware issue? Does apple know about it and are they making a fix?
    Thanx!!

    That's really bizarre! I've been experiencing the same problems. Today my three/four finger multitouch gestures stopped working altogether! Nothing seemed to resolve the problem (restart, shut down, etc).I did however follow your advice of creating a new user account and logging in to see if multitouch works...low and behold, it worked! I then logged off and signed back into my primary user account and multitouch continued to work! This must be a software issue (I'm guessing). I just deleted the temporary user account and everything seems to be working fine. I set up a Genius Bar appointment for tomorrow - I'll see if they have any further suggestions.
    Thanks!

  • Backspace key not working - Macbook Pro using Mavericks

    I've got a Macbook Pro (early 2011 model) which I upgraded to Mavericks earlier this year and all has been working fine. Over the past few days I noticed my backspace key was playing up (sometimes it worked, other times I had to press hard a few times before it would work at all) until today when it decided it would not work at all. I have already checked in System Preferences and restored defaults as well as resetting the PRAM but to no avail so far. Is there anything else I can try or will I need to take it back to the store and get it looked at?

    Since you reset the PRAM, I would take it in for diagnosis.
    Barry

  • Audio and Camera not working Macbook air

    I got my macbook air as a present from a relative and it seemed to work nicely even though I think it was used before. I took pics and watched videos on it before, but all of a sudden the sound would not work so I would restart my laptop and then it would work again but now even restarting it wont work the option to use the built in speakers is not there anymore. I wanted to facetime my friend and it says no that there is no connected camera. I do not know what to do.  I really want to get back to watching stuff and taking pics please help me !!!!

    Hello fridamente123,
    Thanks for the question. After reviewing your post, it sounds like the iSight camera and internal speakers are not working. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    How to Troubleshoot iSight - Apple Support
    Troubleshooting issues with no audio from built-in speakers on Macs - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Bluetooth Not Working / Macbook Pro Retina / Late 2013

    Bluetooth suddenly not working on my Macbook. Definitley not the mouse (work's perfectly on another machine).
    PRAM reset and still nothing. Any solutions please?!

    That usually fixes the missing BT problem. I think, at this point, I would take it in for diagnosis.
    Barry

Maybe you are looking for

  • Macbook 2010 froze and wont boot primary ssd

    My macbook pro 2010 froze all of a sudden and i forced it to quit with the power button held. That shouldn't be anything exceptional. Now the computer does not boot to primary ssd or even notice it with cms pressed, from secondary windows hdd or from

  • I can not access to mail on iMac.

    The story go like this. I forgot my user password and typed a lot of mistakes password. So I change the password with master password. When I logged in, it show that it need keychain password. Keychain password was the perious password but I was able

  • Help with Sample 'Purchase Order' form

    HI Guys, Have been playing around with the supplied sample file 'Purchase Order' At the bottom of the form is a Part No., Description and Cost field that populate from a PartNoScript routine. Have been trying to copy this routine into my own form as

  • How to save, update and retrieve data from two diffrent table

    Hi, I can save and retrieve data into an user defined SBO form from one database table only. How can I save retrieve and update records from two or more different tables in a single screen? Regards, Sudeshna.

  • Enhance payment method

    Hi,    We have only 1 charecter to define payment methods, we have used all of them. Now our client wants to have another bank account with same currency as previous ones, so its not possible to use the existing payment methods. Is it possible to enh