Camera not working since update 8/3/12

After an auto downloaded update yesterday, my camera
does icon button does not work from the touch screen anymore
Any ideas?

Hi Mr trrlightning, I did reboot yesterday after the update & it was ok then when I used it, but today it would not work from the touch screen icon. However I did do as you sugested & hey prestow! I now have my camera back.
Many thanks.

Similar Messages

  • X230T camera not working since Windows update (Windows 8)

    Hi experts!
    I have a X230T with a camera and Windows 8 installed on it.
    The camera driver Lenovo offers for Windows 8 always was unstable. I had a lot of trouble with it already. But after a reboot the camera always worked again. Now, after a Windows 8 update (by Microsoft), the camera is not working at all anymore.
    I already did an uninstall/install of the camera + cold boot, but every time i tried there is no camera function. So it has given up it's work completely. I am pretty sure that the camera is without any fault physically, but the driver just doesn't work anymore under Windows 8.
    Anyway, Lenovo should have fixed the bad driver for a long time already, but now this is obviously a really major issue.
    Any ideas?

    Did you try a real reboot, not just turning off and on (totally different things)
    A reset/reboot is:
    Go to Home Screen
    Press and Hold Home Button
    Keep holding and press and hold Lock Button
    Keep holding Both
    You will see Slide to Turn Off (Don't let go to slide, just keep holding)
    The phone will turn off (in time, but screen will look like it has some white lines)
    Keep Holding
    When you see the Apple Logo, you can let go.
    Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.

  • Exchange email not working since update

    Help! Before the update, my POP accounts weren't working (wasn't receiving new email unless I turn phone off and back on). Now POP seems to be working, but my corporate Exchange account is totally not working. There is a (new) yellow banner message that appears in email list saying Connecting to Server. And then it seems to get stuck there. It somehow downloaded 1 message (the first one that came in) since the update of my phone this morning. But since, it won't Push any more email.
    Also, I think my GPS got worse. When I was outside earlier (granted, I was around tall buildings) it wouldn't get a lock--not even after 5 minutes. WIll have to test further.

    Thanks for the tip.
    I was having the same problem, although it was kinda nice in a way not to be getting instant email notification.
    But I'm back to normal.
    Uninstalled and installed and my nose is back on the grindstone.

  • Hdmi does not work since updating to jelly bean

    Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

    I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

  • Tv adapter not working since updating ios

    since  updating my iPad 2  to iOS 8 my tv adapter no longer works, when I plug the adapter in a message comes up stating this device is not supported by apple

    Hello jimtallis,
    The steps detailed below may help get your TV adapter to function correctly.
    Check the compatibility
    Make sure the accessory is compatible with your device. If the accessory is on the Apple Online Store, you can see if your iPhone, iPad, or iPod touch model is listed as compatible.
    If your accessory uses the 30-pin connector, you might be able to connect it to your device using the Lightning to 30-pin Adapter or Lightning to 30-pin Adapter (0.2 m).
    See if your accessory's compatibility is limited. For example, some accessories might not charge iOS devices if they use FireWire instead of USB to charge.
    Disconnect and inspect the accessory, then restart your device
    Disconnect the accessory and turn it off, if possible.
    Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
    Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
    Try a different device
    Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
    If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
    If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
    If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
    Restore iPhone, iPad, or iPod touch
    Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Resolve issues with iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Cheers,
    Allen

  • Camera not working after updating to Mavericks

    Hi,
    After updating to OS x Mavericks my webcam is not working anymore.
    I tested it with photobooth and skype but its not working.
    Please advice.
    Cheers,
    Chinmaya

    Use Apple's http://support.apple.com/kb/HT2090
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    To find out what you need to fix, you may need to test more than one Apple app in more than  one user account.
    All works for me, but you may need to update to the latest Skype (Skype_6.9.0.517).
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • AirDrop not working since update

    I Have an iMac, iPad mini, iPad and iPhone 5s. We updated to to the new operating systems 2 weeks ago On all devices. Now airdrop does not work on any device. AirDrop to everyone is enabled, turned on under sittings. I turned it off, restarted, turned it back on and nothing helps. How can I fix this issue. When you click airdrop it opens but never shows another device to drop it to. Please help. Thanks.

    if you are one of those people whos router is as it came then likely it have a name (ssid) like Netgear or linksys or the likes
    if you live close to thers who have the same router this could mean your appletv is connecting to an unprotected wifi network with the same ssid as your  without you realising it
    otherwise I would connect it by usb cable to the computer and use itunes to restore the firmware of the appletv

  • Photoshop not working since updated Aperture software

    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    I am trying to do some selective colouring but the brush tool is not working.
    Thank you!

    Fern1 wrote:
    I have been using photoshop CS5 within Aperture for over a year now.
    Unfortunately Photoshop has stopped working properly since I updated the Aperture software to the latest version.
    If it is the Photoshop program not working, then resetting the preferences would be the first thing to try if you have already checked any tool options and layer settings that may be creating a problem.
    Pressing the 'Option + Command + Shift' keys immediately after launching Photoshop will invoke the reset dialog before Photoshop loads it's UI. Use the options to reset as needed. Here is a link to the help file for more info:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab 64-74aaa.html
    I am trying to do some selective colouring but the brush tool is not working.
    Are you referring to Photoshop here or Aperture (both have brush capabilities)?
    Note - there is currently a known issue with Aperture 3.2.3 that can cause issues with external editors and plug-ins:
    http://support.apple.com/kb/TS4237
    Hope that helps.

  • External iSight Camera not working after update installed?

    a couple of weeks ago I turned on iChat and up popped a window that said i needed to update the (external) iSight camera i had plugged into my minimac (firewire). followed the instructions and did just that. little greenlight glowed happily, rotated lens and opened iChat--little green light blinked off and then iChat showed that the camera was not turned on. tried turning it on and off by rotating the lens, unplugging firewire and also restarted computer...no change. looked for update to firmware and downloaded 1.0.3, only to be told it does not work with OS 10.4 (bummer).
    had a back up camera, plugged that in and no problems...trouble is roomate recently got the pop-up screen when he was using it and, thinking he was doing me a favor, 'updated'...so now have 2 cameras that do not work and no answers to be found on the posts or the apple support site.
    any ideas?

    Welcome to Discussions, johnboysf
    (1) Assuming you are not ANY having other problems with your Macs and that your Mac OS X Maintenance is up to date, you can concentrate on the iSight part of your system(s).
    Restart your Mac with no unnecessary peripherals connected and try the suggestions here:
      http://docs.info.apple.com/article.html?artnum=93240
    (2) If your iSight still does not work with any app, check for Possible hardware or software conflicts with iSight.
    (3) I cannot tell whether your mini is an iNtel or PPC. Apply the appropriate Combo Updater as follows if you still have the problem:
    • Backup your Home Folder, or at very least, your important files.
    • Repair permissions. (Click here if you need help.)
    • For PPC, download and apply the Mac OS X 10.4.10 Combo Update (PPC).
    • For iNtel, download and apply the Mac OS X 10.4.10 Combo Update v1.1 (Intel).
    • Finish with another Permissions Repair, and then check your iSight again.
    Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
    (4) If your problem persists after trying all of the above, the problem may be with your iSight itself. The fact that you got that notification after you had previously been using your iSight successfully under OS 10.4.x, and the fact that the updater ran for you and your roommate under OS 10.4.x, makes me think there may be something wrong with your iSights. The Tiger (10.4.x) OS includes all the necessary earlier update (including iSight Firmware 1.0.3) and installs the Firmware update if necessary at the time you installed Tiger or first connected your iSight. Therefore, the Firmware update should be unnecessary and should not have been identified by Software Update... as being needed (unless someone has improperly thrown away some OS X files.)
    As you note, iSight Firmware 1.0.3 will not run except on Mac OS X v10.3.7-10.3.9 (or, it now seems, if something is wrong.) If you have access to a Firewire-equipped Mac that is using one of these OSs, you can try applying the update to your iSights using that Mac.
    (5) If you cannot find a Mac that is still using Panther, or if applying the update does not resolve your problem, contact your Apple Authorized Service Provider for professional service. Ask your AASP if he wants to see your Macs, too, to check whether their software has been modified or damaged.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.10) G5 DP 1.8 w/Mac OS X (10.5)  External iSight

  • Camera not working after update ios5

    My son has the 3gs iphone. After updating to new ios5 a few weeks ago, his camera stopped working. It will take a picture but it shows as a blank photo and he lost all the pictures he had on the phone as well. He just got the phone the end of Sept so he had no other back up or restore at the time of the update.
    We tried to restore to original setting and has not worked. Any suggestions?

    You might be out of luck... PlayBook support officially ended a couple months ago if I recall...
    BUT, try anyway. Previous issues with this very same grey bar camera issue were fixed free of charge with a RMA number from BlackBerry.
    NA Toll Free: 1-877-255-2377
    UK Toll Free: 0808 100 7466
    Europe: +44 1753 558400
    Worldwide: +1-647-426-1108
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wi-Fi Not working since update 2.3.5

    Since updating Android OS to version 2.3.5 I have not had any function in my wi-fi radio. System attempts to scan and never recognizes ANY wifi networks.
    Tried entering/ managing setup manually, but network is listed "Out of Range" even when network is confirmed up by many other devices.
    Any ideas, patches or advice?
    *Wifi worked fine before update

    The obvious painful advice is: Try a hard-reset. If that doesn't do it, it might be time to call VZW support and get a replacement.
    When you installed the update did it appear to install correctly, no error messages or anything?

  • ITunes not working since update, says I don't have insufficient privileges to access directory

    Ever since the iTunes update it has not worked at all for me. So I uninstalled and tried to reinstall but it will not let me. I always get this pop up "The installer has insufficient privileges to access this directory: C:\Program Files\iTunes. The installation cannot continue. Log on as administrator or contact your system administrator".    I am logged on as the administrator and I have turned off my antivirus. Somebody please help!

    tunes. 9..1.1 insufficient privileges error for corefp -- itunes

  • Alt+Scroll do not work since updated to firefox 17.0

    Usually I use Alt+mouse scroll to scroll one line in firefox, but since updated to firefox 17.0, it do not work anymore, even in safety mode.

    It's ok now, thank you very much!

  • App update not working since updating software

    My app update is not working ever since I uploaded the new software last week.  Any suggestions?

    You may want to Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Phonebook/contacts not working since update

    My phonebook/contacts has stopped working, so I can't call or find numbers. All this since the update, everything else seems fine at the moment.

    Hi,
    I'm a bit confused, how do you mean that it does not work? What happens when you enter the phonebook, do you receive any error message?
    Where is the contacts stored? Do you sync via Gmail or an Exchange account or is it local contacts? After the repair, did you restore any backup were your contacts was stored?
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for