Camera not working suddenly

I bought Nokia Lumia 920 but after two weeks my camera is not open,please suggest me with an answer.i was planned to buy this handset for an year after a long struggle I saved my money and then bought it.please cure my problem.

Try a soft reset by holding both the Power and Volume Down buttons pressed for several seconds until the phone vibrates and restarts. You may lose only the time and date settings, which you will have to set again manually. You can also try reseting the camera from Settings > Applications > photos+camera > reset camera

Similar Messages

  • Iphone 6 plus front camera not working in whatsapp

    iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Iphone 6 plus facetime camera not working after 8.1 upgrade

    iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Isight camera not working after the last update

    After reboot of the last OS update
    Isight camera not working...
    i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
    just to give you a recap of what i've tried so far:
    * restarting (obviously)
    * resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
    * just shutting down my computer and taking the battery out for several hours
    any Help pls
    because i mast to use it as soon as possible in a conference

    *A few suggestions.........*
    Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
    my isight camera is not working-not recognized with photo booth or ichat
    To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

  • HP Mini 110-3700 built-in camera not working

    I just bought my HP Mini 110-3700 (LV831PA#UUF) last january. I just tried using the HP camera twice to check if the image it captures is clear. Yesterday, i will use the camera for a video chat but the messenger said "Cannot detech the camera/ device is not connected).When I had clicked the link for the HP Camera it had open but the light indicator didn't have any light and the camera isn't working.
    I already tried restoring the HP mini to factory settings but after that, the camera isn't working still. What should I do? Need help ASAP.
    Thank you!

    bamba-ista wrote: built-in camera not working properly. what do i need to do?
    How to Troubleshoot iSight (also works with FaceTime and FaceTime HD cameras.)

  • Apple 4 camera not working

    My iphone 4 camera not working it opens afters closing 2-3 times before but its can not open now i totaly reset,restore,formet and change software version but still now its not open that is 5-6 month now please tell me what to do now

    There is no Apple here, this is a user to user forum.  When you said you restored, then you restore as NEW?
    If you restored as New and still the problem persiist, then it time to take a trip to the Apple store.

  • Camera not working on new profile

    I have 3 profiles on this same Skype, on one laptop. 1 profile works fine but on second profile camera not working (video not showing), audio works fine. I created a new account (e-mail is same from second profile) and is this same - video not working. I dont understand what is wrong. This same laptop, this same camera, this same drivers/windows7, latest Skype, and from 3 profiles one working fine. Please help!!!

    Try to reset all Skype settings.
    Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
    Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
    Restart Skype.
    N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

  • Camera not working on Lumia 535.

    Camera not working lumia535
    Moderator's note: The subject was edited. A new thread was created.

    Hi, sanaayesha. Welcome to Microsoft Mobile Community. We'd love to know more about your concern. When you say camera isn't working, does it mean it's inaccessible, not taking sharp images, etc.? Does this happen to both main and secondary camera? Are you getting this issue regardless of the lens you're using? You can try checking the workarounds given on this link to further isolate the issue: My camera is not working correctly. The content of this link is applicable regardless of your location. Hope to hear from you the soonest.

  • Camera not work ipad 4generation before ios8 update

    Camera not work ipad 4generation before ios8 update
    PLease help

    Hi Hellside,
    Welcome to Apple Support Communities.
    It sounds like there is an issue with the camera on your iPad. The article linked below has a lot of great troubleshooting suggestions for a similar issue on an iPhone but the suggestions should resolve the issue with your iPad too.
    iPhone: Hardware troubleshooting
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    I hope this helps.
    -Jason

  • LT2223 ThinkVision Monitor - Inbuilt Web Camera not working

    Hi
    I am using a LT2223zwC monitor which has a built in Web Camera but does't seems to be working - Skype cannot detect the camera and I have no idea how to get it work. Tried the Lenovo Web Conferencing from Control Panel, it only allows me to adjust the Speaker and Mic.
    Any assistance is much appreicated.
    Many thanks.
    Gilar

    Thanks For Information..
    But I Am Using Microsoft Lifecam Studio Download Latest Software Microsoft life cam Version 4.25.512.0
    This Is Not A Driver Issue This is Application Issue Or Windows 8.1 Issue 
    I Check 3 Different Camera but Any camera Not Working 
    I Check 3 Different Pc..
    But In Windows 8.1 That Thing Not Work !
    But This Thing Working Ok With Windows8
    This Is Majjor Issue Of Microsoft Windows8.1 
    If I Download Other Store App Like Cammix The Software Give Me Hint..
    Showing Me Error Like..
    "windows.media.capture"media
    capture is not registered, (This Error
    Is Showing In Cammix Application)
    And Microsoft Have To Provide Something To As...
    Thank You For Support....

  • Macbook camera not working

    my macbook air camera not working
    after i updated to 10.8.5
    i have downloaded and installed the supplemental also even then my problem not resolved

    Hashim Jamal wrote:
    i have done reinstallation of os maverics
    and checked camera according to troubleshoot
    still not working what should i do?....
    Use the final "Troubleshooting" suggestion:
    "... contact Apple or an Apple-Authorized Service Provider for service."
    Hashim Jamal wrote:... i took my laptop to a apple authorised service department...
    You did the right thing.
    Hashim Jamal wrote:... apple authorised service department ... are asking for 750usd to get it replaced
    what should i do?
    If you like the Mac you have and need the built-in camera, spend the money.
    If you want a different computer, now is a good time to trade.
    If cost is a concern, consider a Mac compatible external camera. Take your MacBook Air to the store when you shop, and try the external camera you want to be certain that it works before you buy.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Iphone 5 is 1 day camera not working shutter frozen.

    My iphone 5 is 1 day camera not working shutter frozen, and i try restore restart but not use. now I took it to my carrier and now I have to wait 14 days to have my phone ,I feel bad about this.

    That is NOT unfreezing it for me. It returns to home page now after about thirty seconds of total freeze (worsened from last night).
    And now some really strange things are adding to it, like when waking and sliding to unlock, the tab is sticking for several seconds to the right before opening home page. Nobody seems to know whether apps are saved in sync for easy load following a restore. (??)
    Edit to add: when I try the hard reset, it simply prompts whether I want to shut down, so I guess yes, it does finally help to exit the frozen shutter, though as I said, it releases after about thirty seconds.
    One more edit: I turned my iphone off and restarted it to find, knock on wood, that the camera's working now. Will see where it goes from here.
    null

  • Camera not working properly after ios7 upgrade in iphone 4s

    Iphone 4S
    Camera not working properly after iOS7 upgrade.
    It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
    help me to solve this problem

    Have you tried a battery pull?  If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • I m using macbook pro my enter key is not working suddenly how can i solve this problem?

    i m using macbook pro my enter key is not working suddenly how can i solve this problem?

    I have tried to delete but Com.Apple.keyboardtype.plist is missing therefore I cannot reset the keyboard
    /Library/Preferences/com.apple.keyboardtype.plist

  • Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

    I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
    Anyone had the same problem, and if yes what is the solusion?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Maybe you are looking for

  • How to connect my n70 music edition to my pc

    how to connect my n70 music edition to my pc. there is no cable provided.

  • How to Check Delivery and GR (goods receite) date??

    Dear ABAP Guru, I am very new in ABAP and here is my requirement, hoping to have help from you friends and GURU? I need to modify an existed report that run weekly. to Check the delivery date and and GR date. if delivery date is older than a week in

  • Chinese Characters

    Hi, This is a strange one. I am importing an external XML language file, into Flash. In this XML file are a number of Chinese charaters that I want to use within my GUI. There are a number of text fields that I want these chinese characters to be pla

  • HT201209 How can I use app which I have received as gift.

    I have gifted a friend a application. But he has still not received any message or link regarding it. How can he receive and use tht app.

  • How to send IDOC XML to ftp or other servers using ABAP

    Hi,,,,,,EXPERTS I m able to generate IDocs in XML format, using the XML port definition in SAP. The XML file is generated in the application server, in the physical directory specified in the port definition. The application server in on Windows oper