Camera not working with ios 7.1

I have an iphone 4s and when i upgrade it to ios 7.1, my back camera stop working. What can i do?

Hi acsantos.67,
If you are having issues with one of the cameras on your iPhone, you may find the Camera troubleshooting portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden

Similar Messages

  • Voice Memo is not working with iOS 8.2

    Voice Memo Records is not working with iOS 8.2. how to fix it?

    Voice Memo Records is not working with iOS 8.2. how to fix it?

  • PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2

    Well this is upsetting. I created a PDF form with several pages of the same form (it's a travel log).
    My hoping to use Adobe Reader to complete the form and save back as a week at a time won't work.
    I created the form using Acrobat Pro 9 from CS5.
    Does anyone know if a PDF form in a Portfolio should work with Adobe Reader on the iPad2/
    Also, what can I use that works with forms as a portfolio?
    Ken

    Ken,
    please could you describe your workflow. It might help to find some solution. Also it would be great if you can share a sample of your document. Please email it to [email protected] with the reference to this discussion "PDF Portfolio does not work with iOS Reader 11.3.2 on iOS 7.1.2"
    thank you.

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • Email settings DO NOT WORK WITH iOS Devices

    Vz keeps sending these "important" instructions for email port settings, BUT they do not work with iOS devices--iPhones and iPads. Last go around with this I spent over 16 hours trying to reconcile until an Apple Expert discovered "special" instructions for iOS device settings. Get with the program, Verizon.

    So what are the special instructions?

  • Sd photo import camera kit not working with iOS 8

    I bought an Apple brand sd card photo import camera kit for the iPhone 5 (lightning cable) a couple years ago. It no longer works with iOS 8.x. I now have an iPhone 6 Plus and it still does not work. I get the error "This accessory is not supported by this iPhone." Since it is Apple brand it should work.
    I have googled and searched the forums and found no leads on this. I was hoping with the latest 8.3 release it would be addressed. Does anyone know how to get this to work or is it an apple bug?

    One article that might be helpful is here (suggesting you need HUB if it's drawing too much power):
    http://support.apple.com/kb/HT4106
    @ rotorcraft:
    It has to have a DCIM folder, but the directory after the DCIM folder, and the files themselves, have to follow DCF rules (http://en.wikipedia.org/wiki/Designrule_for_Camera_Filesystem)..if it's the structure created by the camera it should be fine but if you change the folder to something other than DSC_xxxx and you change the image filename to something other than ABCD1234.whatever then it won't show up.
    You can double check if the kit is being recognized at all in Settings -> About, then scroll to the bottom, it should say like Apple Card reader or something I forget. If it isn't, I would just reboot

  • Camera not working with Facetime under iOS7

    Hello,
    My front camera doesn't work since upgrading my iPhone 4S to iOS7.  The image is not clear (I just see my shadow)
    It was working perfectly under iOS 6.1.4
    The front camera is working with other apps like Skype and I can take picture with Camera' app.
    I have an iPad and there Facetime works correctly.
    Does anyone has the same problem ?
    Soft or hardware problem ?
    Many thanks for your help.
    Kind regards,
    Sébastien

    I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
    It all worked fine before the install of ios 7
    I have tried reinstalling the software by restoring the phone, but its just the same.

  • My camera not working with tango

    My camera not working on Tango since i update my iphone 5s to IOS 8

    Delete and reinstall the app.

  • Why is my iMessage and FaceTime not working with ios 7?

    I just updated my iphone 5 to ios 7 and it's not letting me use FaceTime or iMessage. It's saying it's still activating. I'm afraid if I reset I will lose everything, but is there any other way to fix it?

    Hi there,
    both services send a silent SMS (one that is not listed anywhere on your device) containing a configuration request to an Apple server. This server then responds with the needed configuration details. It can take some (from a few minutes to several hours) time for this answer to come. Also if for whatever reason text send/receive is not working properly, iOS can get stuck on the "waiting for activation" message.
    Hope this helps,
    Chris

  • Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

    I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
    Anyone had the same problem, and if yes what is the solusion?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Iphone 4 not working with iOS 6, Iphone 4 not working with iOS 6

    iOS 6 is not working on my iPhone 4. When the update/restore finishes it gives me the (-1) error and cannot finish the update. Please help.

    Hey.. I have had this issue since yesterday afternoon.. Some people are saying to keep restoring again and again until it finally goes through.. I have done so like 10 times on my MAC and then I used my husband's PC and tried it 4 times.. No success.. I called apple support, but no help came from there at the end, and the only thing they were able to suggest to me is to sell me a new phone just like mine for a discounted price.. **** NO
    Anyways after about 18h of search and stress I came across this link:
    http://techglobex.blogspot.com/2012/06/downgrade-from-ios-6-beta-firmware-to.htm l
    That will only make it possibe to go backward.. You will end up back with the IOS 5, but at least you will have a working phone and it will bring back all your contacts and everything else that you ever had backed up on icloud and on your computer. There might be descripencies with the Applications but again this is an issue easily solved, you can always download them back.
    Two more things: One, you do not have to download the old version of the itunes, the newest version worked for me without any issues
    When choosing to download the older IOS 5.1.1, you will need to figure out whether your carrier is GSM or CDMA but you can easily google this info online..
    Well hope that will work for you like it did for me

  • Camera not working with msn

    Hi all I just bought this MacBook Pro 2 weeks ago, the built in camera works fine with photobooth or facetime, but when I try using it on Skype or MSN, it does not work.  I cannot send myself over! I can see my friends but they can't see me.  -_- help!

    I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
    It all worked fine before the install of ios 7
    I have tried reinstalling the software by restoring the phone, but its just the same.

  • 3gs Camera Not Working with OS 5.0.1

    I just swapped my girlfriend's 3G backup over to my old 3GS with OS 5.0.1.  The camera will pull up but the shutter stays shut and it will not function.  Any suggestions as to what will fix this?  I have tried powering it off and back on, resetting it by holding the home key and the power button at the same time, restricting the camera followed by powering the phone off and then back on and then unrestricting the camera.  About the only thing I can figure is to restore the phone via iTunes and see what happens.  Any suggestions would be appreciated.
    Darren

    My 3GS iPhone camera is working fine with ios 5.0.1.
    Try to restore the phone with itunes as "new phone" and see what happens.
    Good luck!

  • Playing Slowmotion video over airplay does not work with ios update!!!!!

    after upgrading last ios , airplay to shoot slowmotion video does not work.
    I was expecting it to be fixed with recent update, but still not working!!!
    I use it for education at my clinic - which is essential, and how come apple does not fix it at all?
    or apple should give downgrade option at least.
    FIx it, fix it, fix it!
    Main purpose of puchasing ipad air2 was to airplay slowmotion video to big screen and i  am quite disappointed with my purchsing ipad air 2.

    As the original poster, I too had issues with my iPhone 4 (4.2.1) and Apple TV 2 playing nice. The Airplay icon was visible for music, and worked perfectly. However, when watching a video, purchased through iTunes, only the "audio" option would be selectable for Airplay. After updating the Apple TV software, everything works perfectly well. When watching a video on my iPhone and selecting the Airplay icon, one of the options is to play "video" through the Apple TV, not simply audio.
    It would have been nice to know that my Apple TV needed an update when I updated my iPhone 4 to 4.2.1.

  • Built in isight camera not working with flash

    My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

    zeppelinfan1234 wrote:
    I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
    Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
    For your symptoms with this system, I suggest you do the following:
    (1) Apply the 10.5.8 Combo Update using the following process:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install
       http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
      • Repair permissions again immediately following the restart that finishes the update.
      • Test whether Flash works for you now.
     (• Turn Time Machine on later when you are satisfied that the update worked.)
    (2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
      http://get.adobe.com/flashplayer/otherversions/
    Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

Maybe you are looking for

  • I want to load data into Oracle using XML & Java - hints??

    I have a XML files that are created on a timed basis....they describe a photo and point to a dir where the photo is stored...like... <image> <user>bill</user> <img>photo.jpg</img> <img_dir>'/tmp/photos'</img_dir> </image> I'd like to write a Java pro

  • Incorrect TimeStamp in Generic Delta (UTC Issue)

    Hi, I have a problem regarding a generic delta extractor. The pointer stored in rsa7 (ROOSGENDLM table) is not UTC but system time. As standard tables store the timestamp using UTC format the delta extractor is not picking up the correct data. Do you

  • Keeping stacks closed *automatically*

    I'm not new to Aperture. In the past, after editing an image and returning to the browser, only one version of that image was visible -- the edited version. I liked that behavior. But now, after editing, I see multiple (usually two) versions of each

  • Distribution Status Failure

    When I open the SCCM 2012 R2 Admin Console and browse to Monitoring | Overview | Distribution Status | Distribution Configuration Status , all the DPs are banged.  The MP is fine. When I look at the associated asset messages, each of them says... Upo

  • Ship to party - condition type

    Hi experts, pls help solve. Thx. Issue: The system pops up the msg below when using another ship to party. "Pricing error: Mandatory condition MWSI is missing Message no. V1801". Background: Another ship to party is created by using VD01, i.e. only "