Camera not working with Lion

Hi,
I have a late 2008 version of the MacBook Pro. I just installed Lion, my camera is not working. It says there is no camera connected. I used my camera a lot with snow leapord. I don't know what the issue is. Let me know if you can help?

After trying -what seemed like everything- on the software side of things, I went into the Apple store.  The genius Bar person then ran through all of the same things without fixing it so he concluded it had to be hardware.  We both agreed that since it was working before, hardware shouldn't be the problem but he was out of solutions.  They replaced my entire screen module and camera.  I don't know what else they reset in doing the hardware change but now the camera works again.  I still find it hard to believe it was actually a hardware issue.  Especially with all who are having the same issue.  I'm guessing it had something more to do with some reset they did when the hardware was changed since my clock was off and my settings were different.  By the way, this would have been a $310 charge but I was under warranty.  whew!

Similar Messages

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • Adobe Photoshop CS5 is not working with Lion.

    Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

    I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
    I followed this link : http://support.apple.com/kb/DL1421  to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
    So thanks to the message boards for helping me out.
    Reg

  • Why does Corel Suite 10 does not work with Lion OS?

    Why does Corel Suite 10 does not work with Lion OS?

    Either it's incompatible or it's a PPC-only application. PPC applications are no longer supported in Lion because there is no longer a Rosetta emulator. Contact Corel for support.

  • Safari 5.1 is not working with Lion. Will not open any websites. Solutions?

    Safari 5.1 is not working with Lion. Will not open any websites. Solutions?

    http://support.apple.com/kb/TS1920

  • How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

    My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

    Did you try removing the printer from the queue and then reinstalling it?
    I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
    I opened System Preference > Print & Scan and deleted the printer.
    I then added the printer back and it now working again. Worth a shoot first I should think.
    Much easier the a downgrade.
    Allan

  • My cannon printer worked with snow leopard but does not work with Lion

    My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

    Have you downloaded and installed the latest Canon printer drivers?
    http://support.apple.com/kb/DL899

  • Tascam US-428 not working with Lion

    Tascam US-428 not working with Lion - Does anybody know why and what I can do to fix it?

    The Tascam US-428 is a great unit, but like all businesses, Tascam desires to keep you purchasing their equipment and not stay with your old legacy items.  If they would consider servicing legacy units, possibly most may stay with Tascam.  But this keeps the machine moving when you "force" customers to upgrade their products when new technology shifts.. 
    The "only" reason US-428 users need to upgrade and put aside the unit is if they need 64 bit functionality.  I did not have crashing when I loaded Logic in 64 bit mode due to the ability to access my 8 gigs of memory...and is the "only" reason why I need to go 64 bit.  32 bit functionality is limited to 4 gigs of memory.  Lion by default is 64 bit, so that is a plus.
    But...if Tascam would continue to service some of the legacy units like the Tascam US 428, then some of us would not go to their competitors and may stay brand loyal.  I think Alesis has something simular and along the same portability as the Tascam US 428, so some might have to jump ship with Tascam. 
    If enough people called up Tascam asking about the US 428 or surfs their website and looks for the US 428 (I am sure they keep track of where people are going on their site), they might reconsider....
    I have been a Tascam user for may years, but "if" they would put out a driver for the US 428 for Lion, I may stay with them...but they leave us with little choice but to look for something else...they do not have something comparable to the unit right now.

  • Keynot does not work with Lion OSX 10.7.2

    First there was the problem with the hidden Library/application Support/iWeb/domaines, which is an important problem for me as I use my web site to show people what kind of work that I do (videos with still photography); now there's the problem with Keynote, which does not even open with Lion OSX 10.7.2. Up until now, I was using Keynote to do my video projections in small town halls. I use Protools for the sound and Final Cut (that's another problem!) for the photos and then do a Quick Time session which I put in Keynote. It was working just fine - until Lion came along.
    It seems to be well known that Apple is going to discontinue iWeb (let's not talk about what they did to Final Cut) - and now it looks like they've got plans for Keynote as well. It looks like the solution is either to use PowerPoint rather than Keynote, or to downgrade back to Snow Leopard. I'm tempted to change to PowerPoint just to keep in the race, but where is Apple taking us? I'm not sure that what Apple want's us to do is really good for us! But is it realistic to hang on to Snow Leopard? Are the PCs better or are they doing the same thing? It almost seems as if there were commercial agreements between those who run everything...but that's another story - or is it?
    Théo

    Yes, it should work with Lion.  It does for lots of folks.
    Are you getting an error message of some sort?  If so, see #C2 in Time Machine - Troubleshooting.
    If that doesn't help, try re-selecting it, via Time Machine preferences.
    Or try a "full reset" of Time Machine, per #A4 in the Troubleshooting article.
    Or reset the TC itself, per http://support.apple.com/kb/ht3728

  • Acrobat 7.0 does not work with lion

    Why does my Acrobat profeesional 7.0 not work anymore. just installed Lion os.  Can this be fixed? Do I have to buy another version?

    Acrobat X Pro is the only version Adobe states works with Lion. You'll have to upgrade.

  • How to upgrade ms office not working with lion (20004)

    what should I do, if after upgrading to lion my ms office is not working
    is there any alternative working with Lion, what is not to expensive
    Thank You for tips

    Upgrade to Office 2011 (not free)
    Install Open Office (free)

  • Camera not working with Facetime under iOS7

    Hello,
    My front camera doesn't work since upgrading my iPhone 4S to iOS7.  The image is not clear (I just see my shadow)
    It was working perfectly under iOS 6.1.4
    The front camera is working with other apps like Skype and I can take picture with Camera' app.
    I have an iPad and there Facetime works correctly.
    Does anyone has the same problem ?
    Soft or hardware problem ?
    Many thanks for your help.
    Kind regards,
    Sébastien

    I have the same issue, and when i try to switch back to my other camera, it freezes the screen and I have to force shut down the camera app.
    It all worked fine before the install of ios 7
    I have tried reinstalling the software by restoring the phone, but its just the same.

  • Old macbook pro3,1 (2.4 GHz Intel Core Duo) camera not working with Mavericks

    I have an old macbook pro3,1 (2.4 GHz Intel Core Duo, I think 2007), builtin camera not working and I think it is related to mavericks update.
    Anyone had the same problem, and if yes what is the solusion?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • My belkin play max router software does not work with Lion

    Does anyone know if there will be a fix with this?  My imac is only 2 months old and my router is the same age.  Since upgrading to lion I have frequent dropouts and no working self-healing program.  I have changed channels with some succes but it's much less reliable than pre
    Thanks

    Here's their  reply, so the software is not compatible with Lion and no fixes in vew:
    Dear customer,
    Thank you for contacting Belkin Technical Support.
    I understand your concern and I would certainly be happy to help you.
    I regret the Inconvenience caused,
    Based on the Information provided, I am afraid to state that the Belkin software doesn't support MAC OS X Lion 10.7. As there are no drivers for it. We are aware of this issue. Our Engineers are working on it. We do not have any update about the new release for MAC OS X Lion 10.7. However, will keep you updated if there's any.
    Should you have any further questions, please take a moment to review our Knowledge Base at http://belkin.com/support
    Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email.
    Thank you,
    Mousin M D
    Technical Support Agent
    Belkin Technical Support.

  • VMware Fusion 2 does not work with lion

    I need the VMware Fusion to run my dictonary on the Mac. I have up to now Fusion2 and this does not work with the lion.

    jbjoret wrote:
    VMWare and Parallels hook themselves deep with the OS and are not standard applications.
    Parallels broke in the 10.6.8 update, caused a lot of headaches around here.
    I don't think they follow Apple's rules too well.
    Fusion might be a bit less feature rich, but it seems they are more complaint. Also Apple sells Fusion and likely uses it themselves.
    Both are excellent of course.

Maybe you are looking for

  • Moving from Debian to Arch and exim Problem!

    hello all, I Installed arch linux and trying to get exim to work. I use to have Debian with exim and would like to same exim configuration on the new Arch. Here my exim configuration: exim.conf MAIN_TLS_ENABLE = true daemon_smtp_ports = 25 exim_path

  • Ipad restore functions are not working

    I just tried to update my ipad2 to iOS 8, and it crashed while the update was being downloaded onto the ipad. Now when I plug it in, it says to go to restore settings, and then says "the iPad update server could not be contacted". My network setting

  • Space after showing up in my Indesign dock

    Hi- I would swear money that I have had the little Space before and after menu (like the ones on the Paragraph pallette) show up on my Indesign dock. Am I crazy?

  • Using AirportExpress as wireless-to-wired bridge?, Using AirportExpress as wireless-to-wired bridge?

    Hi, Is there any way to configure an airport express so that it connects to a wireless network and shares the connection via the wired ethernet port? I have an iMac with a flaky airport card, but it's too far from my router to run an ethernet cable.

  • When I plug in an USB stick, my MacBook Air disables all USB devices

    When I plug in an USB device, my MacBook Air disables all USB devices and the keyboard. It looks like it would freeze, but all applications still work. It just does not respond to neither keyboard nor mouse. The only solution is to force-restart it.