Camera Pro 2.2.4 for the N8 - Info on Screen?

hello,
When I take photos i get a translucent screen with Exposure, Apeture Shutter Speed and Digital Zoom appearing over my photo.
How do I stop this from happening. It just started...
Thanks,
VeePee
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930
Solved!
Go to Solution.

Check under Global Settings-->Image settings-->On Screen Info...
Have a look at this ....(though for older version..)

Similar Messages

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

I have a 1st Gen, MacBook Pro from 2006. For the last few years I've had to us my power adaptor as my battery no longer works. Now my power adaptor looks like it's coming to an end. Even though it's securely fitted, it often switches off.

I have a 1st Gen, MacBook Pro from 2006. For the last few years I've had to us my power adaptor as my battery no longer works, and shuts down after 30 seconds it. Now my power adaptor looks like it's coming to an end. Even though it's securely fitted, it often switches off.
I am planning on buying a new MacBook Pro later this year, but for the meantime I'm not sure if I should buy a new power adaptor, or if this is a problem with my MacBook Pro. Also does anyone know where I can buy a battery in the UK for 1st Gen MacBook Pro.

OWC has batteries for 1,1 generation MacBook Pros and they ship internationally - http://eshop.macsales.com/.
Your best bet for a power adapter is to get one from Apple. Third-party adapters just don't seem to be reliable (or safe). You can also buy a replacement battery directly from Apple, of course, but they're a bit more expensive.
Good luck,
Clinton

I am trying to load LR on my new macbook pro. It asks for the serial number. I enter the digits, but it says, quote, " This is an upgrade serial number. The serial number from your previous version of Lightroom is also required."

I am trying to load LR on my new macbook pro. It asks for the serial number. I enter the digits, but it says, quote, " This is an upgrade serial number. The serial number from your previous version of Lightroom is also required."

If you still have the old computer and it is a MAC, the Lightroom 5 serial numbers are in a text file.
users/"username"/Library/Application Support/Adobe/Lightroom/Lightroom 5.0 Registration
More info here
Preference and other file locations in Lightroom 5

How can I delete photos from my ipad that came in when I connected for the first time to my pc?

how can I delete photos from my ipad that came in when I connected for the first time to my pc? HELP

Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
If you want to remove all of the Photos - uncheck the Sync Photos from Heading
Click on Apply in the lower right corner of iTunes
If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
http://support.apple.com/kb/PH12313

When will the Camera plug-in be updated for the Canon 70D for Elements 9?

When will the Camera plug-in be updated for the Canon 70D for Elements 9

Hi,
There hasn't been an update for PSE 9 since Sept 2011 so it is unlikely to ever be updated for the 70D.
Your options are
1) Upgrade PSE 12 when it comes out (probably soon)
2) Use the Canon software (DPP) that came with your camera - convert to TIF files and import those into PSE
3) Download/Install the free Adobe DNG 8.2RC Converter to convert your CR2 files to DNG files - the DNG files can then be processed by PSE 9
Brian

I am about to buy my first Macbook Pro, should I wait for the possibility for a 2015 macbook, or just get the most recent model currently? (9-22-14)

I am about to buy my first Macbook Pro, should I wait for the possibility for a 2015 macbook, or just get the most recent model currently? (9-22-14)

No one knows if there will be a new model and if so, when that would be. However, there always will be something bigger, better, and newer around the corner, so you'd be waiting forever.
Buy it when you want or need it.
FWIW, here are the specs of the latest models (which happen to be mid 2014):
Apple - Support - Technical Specifications

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

HT201441 I bought an iphone 4*at*t from a craigslist ad. The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info. I contacted the seller and he is not responding. What do i do?

The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info in order to do anything with the phone. I contacted the seller and he is not responding. What do i do?

he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil

Using your MacBook Pro as a Router For the Xbox 360

Not sure how many of you guys have 360s, but I've written up a guide to use your MBP as a connection point for the 360. Basically it involves sharing your Airport with the Ethernet port. Here goes.
How to Use a MacBook Pro as an Xbox 360 Internet Hub v.01
This guide is copyright 2006 Jonathan Ferguson.
If you would like to host it, email me at the address below.
All trademarks are copyright their respective owners.
I am not responsible for anything that happens that may screw up your Mac, 360, Internet, or anything else.
By reading further you accept full responsibility for any damages or troubles that occur as a result
of your using this guide. K?
Welcome! I recently purchased a MacBook Pro and did not feel like shelling out 130 dollars for the
360s Wireless Adapter.
Thus I set out to find a solution and it was my shiny new mac that came to the rescue.
I'm positive this can be done in Windows, but I've not taken the time (yet) to test it.
I think it's very simple to follow, but I do recommend that only those with patience and a will to learn attempt the setup.
Also if you don't know how to reset your router, I wouldn't recommend it either. But for the rest, on we go.
You will need these things for this adventure:
Broadband Internet Access
1 Xbox 360
1 CrossOver Cat 5 (NOT Patch, so NOT the one that came with the 360)
1 Macbook Pro (the regular Macbook may work, I haven't tested it)
1 Router with wireless and wired connections or 2 Routers linked together, one wired, one wireless.
Plug the cross cable into the ethernet port on the mac and the ethernet port on the Xbox 360. Turn both on.
Go to your system blade on the 360 into the network settings and go to the Sharing area of the
System Preferences on the MBP.
On the MBP make sure that your Airport Extreme connection is being shared with the Built-In Ethernet
(check the box next to Built In Ethernet and hit the start button at the top.).
Go into Network under System Preferences on the MBP.
Pick Built In Ethernet in the Drop Down menu. Write down the Subnet Mask and IP Address for the adapter,
you'll need that later.
Contact your router by punching it's IP into an internet browser. (I.E: 192.168.1.1).
This is usually the default IP for any router, so if you don't know what it is, try that one.
It'll also ask you for the password and username which are usually:
Login: admin
Pass: password
Login:
Pass: admin
or
Login: admin
Pass:
Once you're in find the DNS Addresses (DNS 1 and 2)
(under LAN not WAN if they're different) and write those down. Now it's time to go back to the Xbox.
In the settings tab you'll find a lot of stuff has been set to automatic.
This will not help you, so start changing the things to manual.
Once you get in there, input each piece of information like so:
IP Address: Have a look at the address of the Ethernet Adapter.
Copy it digit for digit only make the last number lower than the last number of the Ethernet Adapter.
(I.E if the Adapter is 111.211.13.5, make the 360 111.211.13.4)
Subnet: This is the Subnet Mask you got from the Ethernet Adapter.
Gateway: This is the IP address of the Ethernet Adapter (NOT the address of your router)
DNS: These are the DNS numbers you got from your router.
Now, before you allow the Xbox 360 to test the connection, make sure that you have a
wireless internet connection coming in on the mac, and that you're sharing it with the ethernet card.
Also, though I haven't tested it yet, keep the Ethernet card on DHCP. Putting it on manual might mess things up.
Et Voila! Let the 360 run the tests.
There's one test that'll take extra long to do but don't fret, it eventually goes through and works splendidly.
I'll update this as I see fit, and feel free to email me at: [email protected] to add/correct/contribute.

Well that's nice and all, but why not just spend the 50 bucks on a router? Also, why do you need a crossover cable? Modern operating systems do not require crossovers anymore.
~David

Why do we still have no pro-grade email app for the mac platform?

This is a combination of a question and a rant, I suppose. When I first came to the Mac platform back in 2003, I looked to see what the best email clients were and was surprised to find nothing that I thought was really strong. I started with Mail, hated it, switched to Entourage, and then since that time I've used or demoed about everything I can find. Powermail, Eudora, Mailsmith in years past, and more recently Postbox and Sparrow. I find all of them sorely lacking and it just keeps begging the question in my mind: why hasn't anyone yet created a truly professional-grade email application? I honestly think there's a huge market for it, and I think a lot of people would be willing to spend $30-50 for an app that got it right.
Right now, I use Mail with the add-ons MailTags and Mail Act-On, and I've got my workflows and practices down to a pretty tight level. I am an adherent of inbox zero concepts/GTD and I practice them. Like many of you I get a lot of email, probably 200-300 per day. There is no application I use on my computer more intensively than email, and yet it's the one app that is probably the most lacking from a development standpoint.
here are some of the things I'd love to see:
- support for IMAP, POP3 and Exchange
- an attractive, Mac-like user interface. Could Mail get any uglier? Why yes, yes it could, we now have Mail in Lion! Holy crap, were they incentivized to make it as dull and unattractive an app as they possibly could? If so, that team must be getting huge bonuses this christmastime.
- industry compliant tagging
- robust search functionality. Let me do quick spotlight-based searches, or give me a search dialogue box where I can construct more complex queries.
- robust smart folder functionality. Mail does ok here, but it could be a lot better.
- global rules (which Mail has but an app like Postbox doesn't), and then the ability to either have the rules applied automatically to all messages, or to fire a rule "on-demand" with respect to a single selected email (in other words, build in Mail Act-On functionality)
- integration with social media. Postbox does a nice job with this. Hit their info pane button and you see a nice summary of all the links and possible social media interactions available via that selected email
- integration with cloud-based file storage, and apps like Evernote, DevonThink, Omnifocus, etc
- an intuitive, flexible layout that allows me to see my accounts and folder structures the way I want to see them, not the way the app forces me to lay them out. Mail does a much better job of this than Postbox, for example.
- integration with industry-standard archival practices. For example, integrate with MailSteward.
Mail is honestly not that far away, but they've been "not that far away" for the last 8 years I've been using a Mac. I keep thinking SOMEBODY has to get this right and step up to fill this need, and nobody does. What I'd really love to see is the OmniGroup (the guys that make fine apps like Omnifocus, Omnigraffle, Omnioutliner, etc...) step up and make "OmniMail". Give me an interface and a user experience I look forward to using, not one I use in spite of the interface. Give me a simple, efficient structure with depth and power under the hood that I can customize and tailor to my workflows.
if any developers read this, I am begging you: create this product. I've read every email app review I can find, visited a ton of blogs, user forums, etc..., and I think there is a huge demand for this kind of an app. If I did such coding, I would take the project on myself, but I'm just a user, not a developer.
Hope it happens someday. From my perspective, it's sorely needed.

I agree completely; email applications on the Mac lag (and I agree with the OP's frustration with responses as well).
I also have settled on Mail with Mail ActOn and MailTags; this functionality should be incorporated into the OS. I actually like using Outlook in Win 7 better; it's super easy to connect files, contacts, email and other stuff right from one application. And Win 7 has better preview and tagging built in, better than QuickLook. On the server side we desparately need gmail to use tags, but I don't see that happening. I still prefer the labeling scheme it has over Apple's mail, however. But I also find that it confuses many users (labels vs folders).
There are also other applications that integrate email functionality, like SOHO Organizer, or Contactizer. Good, but not the email holy grail.
I'd like to see communications built into the Finder or system, which badly needs an overhaul. It hasn't changed much since the 90's and shows it. Communication, whether it be email, tweets, social media posts, sharing, etc, is such an integral function of all work you do on a computer it should be better, um, integrated into all applications. You should be able to send data from any application to others in a variety of formats without having to go into an email application. Sure, you can now do this to a certain extent with either built-in menu items or services, but it's clunky. For example, when you write something you can either "save" and write to disk somewhere, or "export" in a different format, or maybe "email." All of those choices should at least be part of one dialog; it's just as likely you want to email, post, share or tweet what you just wrote, so just having a "save" dialog is way outmoded.
So, yeah, somebody get on this.
Rob

HT4889 Just got a new macbook pro. Trying to migrate data from a MacPro to the macBook. MacBook will recognize the Mac Pro but not vice versa. Using Mac OS X 10.6.8 on the Mac Pro(powermac G4. The Mac Pro searches in vain for the MacBook. What should I do

Just bought a new MacBook Pro. Attempting to migrate data from a power mac G4 running Mac OS X 10.6.8 using a firewire.
Mac Book will recognize the Mac Pro but the Mac Pro just continues to search for the Mac Book. What should I do?
Dave VanHorn
[email protected]

Put the G4 into Target Disk Mode and open Migration Assistant on the new MBP. Your G4 needs to be running 10.5.8.

When will Camera Raw support be available for the Olypus OM-D E-M5

I have just purchased the above Camera but Lightroom is not able to laod the raw files it generates. Does anyone know when support for the camera will be available in Camera RAW?

Have a look at the posting of April26th 2012 on Lightroom Journal. Support is availble with LR 4.1. Release Candidate 2.
http://blogs.adobe.com/lightroomjournal/

When will Camera Raw support .arw files for the new Sony RX-100?

I have Photoshop Elements 9 and just purchased the RX-100. Currently the .arw raw files the camera produces are not supported in Camera Raw. When will Adobe be supporting this format?

No one can tell you when, but the new RX100 has support in the beta of Camera Raw 7.2 RC for Photoshop CS6 so I would guess that PSE11 will either ship with or could soon after be updated to ACR 7.2 with RX100 support.
PSE10 is the current version, but in the past, a new version of Elements has come out about this time of year so sometime in the next couple months.
What you can do right now is download the beta of the DNG Converter 7.2 RC from Adobe Labs which will convert a folder of ARW files to DNG files which can then be processed with older versions of Camera Raw including what comes with PSE10 or PSE9.
You could also download and use the beta for Lightroom 4.2 RC from on Adobe Labs to work with your files natively until the beta expires by the end of October, but before then you’d probably have a new version of Elements that would work. If you go the LR 4.2 RC route, you’d want to save your changes to XMP sidecars in LR so you could read them using ACR in Elements, later.
Betas/RCs are available at: http://labs.adobe.com/

Camera Pro 2.2.4 for the N8 - Info on Screen?

Similar Messages

Maybe you are looking for