Camera profile tab suddently greyed out

Went to use LR just now and the camera profile options are greyed out. Anyone else experience this? I'm using 5.7 and OSX 10.10.2
I've never seen this disabled ever.

You're quite correct that both operating systems have problems. To offer my story, I had used Windows exclusively since 1993. I'd wanted a Mac at that time but they were SO much more expensive than the Windows 3.1 machines, and I wanted a larger monitor so was quite proud of my NEC monitor at that time.
I wasn't able to acquire a Mac until 2.5 years ago. I'd planned on switching over entirely to the Mac but I soon discovered the "joys" of having two systems on in front of you at once! I soon began to prefer all of my photo editing work on the Mac, partly because my Windows 7 machine is much older and slower. I can tell you that during this two years my Mac has crashed on three times, when it became unresponsive. I had to restart without saving but when it rebooted (which takes about 20 seconds) everything was fine. My Windows 7 machine, on the other hand, has crashed many times, and had many more problems where it would not boot, or would not shut down and I simply would have to cut the power and try and do a system recovery. I'm a "power user" so I am not uneducated about how to maintain a Windows computer. The Mac just works so much more reliably. I AM NOT an Apple freak. I do not use an iPhone (I prefer Android) and I am not planning on acquiring an Apple Watch. BUT I do know a good operating system and hardware when I see it, and my Mac is one smooth operator.
Sorry for going on about Mac/PC in the wrong forum, but we sort of touched on it.

Similar Messages

Hi there, have just tried purchasing an album in iTunes but the price tab is greyed out. This is like it for non explicit songs, yet the explicit songs and albums I can purchase fine. Seems a bit back to front to me, any ideas?

Hi there,
Have just tried buying an album in iTunes on my iPhone 5 and the price tab is greyed out. The album is "clean" yet all the explicit albums price tabs are fine and i can purchase and download fine. Seems a bit back to front to me, any ideas what's going on?

Try this previous discussion:
https://discussions.apple.com/message/1552107#1552107

Newbie, Missing Admin tab and Schedules tab is greyed out

Hi,
I am totally new to BI Publisher. I just completed the installation of both Oracle DB 10g and OBIEE 10.1.3.4
I am following the example in OBE to get started with BI Publisher. However, when I open the BI publisher, I don't see the Admin tab and also the schedules tab is greyed out. Where can I reenable the Admin tab?
Installation details:
OBIEE 10.1.3.4 with BI Publisher
I am accessing the BI publisher from Business Intelligence/BI Publisher
Username: Administrator
Or is there another menu tab to perform BIP Admin in this version?
Thanks,
Gina

gmsamia wrote:
Hi,
I am totally new to BI Publisher. I just completed the installation of both Oracle DB 10g and OBIEE 10.1.3.4
I am following the example in OBE to get started with BI Publisher. However, when I open the BI publisher, I don't see the Admin tab and also the schedules tab is greyed out. Where can I reenable the Admin tab?
Installation details:
OBIEE 10.1.3.4 with BI Publisher
I am accessing the BI publisher from Business Intelligence/BI Publisher
Username: Administrator
Or is there another menu tab to perform BIP Admin in this version?
Thanks,
GinaWelcome to BIP!
Admin tab: u have to include Admin ID in the XMLP_ADMIN group in the RPD. (i believe u know how to do that)
Schedule: U have to configure scheduler and start the scheduler service. U need to follow as series of steps for that ...

Share tab is greyed out when trying to export in FCPX - cannot export - I would like a real answer in plain english! Thank you!

The share tab is greyed out when trying to export from Final Cut Pro X
Please help with a REAL answer in plain English.
Thank you!

Thank you Tom!
I checked every clip -
Trashed preferences too.
Finally, I took your advice and backed-up my events and projects.
Trashed Final Cut Pro X
Downloaded a new copy from FCPX from the app store (from my previous purchases)
Restarted FCPX
Opened my event
Moved to the timeline - and now!
The SHARE tab works!
Every aspect of FCPX is working faster as well.
Go figure?
Thanks again!
Allan - olvblock

Windows Deployment Service. Network Profile Radio Buttons greyed out with R2

Hi All
I have downloaded and setup Server 2008 R2 (not yet activated). I have added the following roles "DHCP Server", "DNS Server", "Active Directory Domain Services" and "Windows Deployment Services". I can PXE boot a test client machine and (using the boot.win from windows 7 dvd) multicast a XP Image to it. This setup is connected via a 100 Mb switch and is an isolated network.
Under windows deployment services - if I right click my server - select properties - network tab "Network Profile is greyed out". I have tried running wdsutil /Set-TransportServer /Server:big /Profile:100Mbps but get the following error message: "Windows Deployment Services Management Utility Version 6.1.7600.16385. Error code 0xC110011F This WDS transport server does not support network profiles.
I have tried this on two hardware setups:
An Intel D915GUX 3GHz 2GB RAM and Marvel Yukon 88E8050 ethernet controller.
An Intel D965 Core2Duo 1.86GHz 2GB RAM and Intel 82566DM Network controller.
Incidently I have done the same setup with Server 2008 (not R2) on the D965 and the Network Profile radio buttons are not greyed out. If I upgrade the same test machine to server 2008 R2 the Network Profile radio buttons are greyed out. Is this a design change, does Server 2008 R2 no longer support network profiles as I am now unable to select 10 100 or 1000 Mbs ?
If more information is required or if anything needs further detail please let me know.
Thanks for any help.
Liam.D

Is there any way at all to manually set or control the network profile? In my environment, a SCCM\WDS multicast stream is bottoming out on speed and network utilization when the stream crosses a Nexus 7009 router. Speeds go from 200 Mbps to 20 mbps. I have
a theory that this "new" automatic configuration is placing the clients in a slow network profile that are on the opposite side of the router and I have been unable to find a way to speed of the transmission. I have also ruled out the "master
client" slowing down the stream buy using different clients only connecting to a stream 1 at a time. I have also ruled out the router as the source of the problem by having a VLC client listen to the multicast stream on the same side of the router as
the slow clients. The VLC client (unknown to SCCM\WDS) was able to receive the transmissions at 20 % utilization / 200 Mbps.
-Tony

Lens Profiles - Search Online greyed out

Hello,
I was looking for more lens profiles within Photoshop CS5 and I noticed that within the "Lens Correction" window under "Lens Profiles" the "Search Online" button is greyed out. I am looking for more Canon lenses.
1. Why would this option be greyed out?
2. Where can I go to get more Canon Lens Profiles?
Thanks,
Dave.

@simonsaith
That helps to understand what is going on, I checked my images in Bridge and under "Lens" in the EXIF information there is no data, so this makes sense.
I just took some experimental shots and Bridge verifies that is has the Lens data. I pulled them into Photoshop Lens Correction and the "Search Online" button is now available.
I am not sure why it did not see the lens data before and does now. Perhaps it is because I recently ran the Canon EOS Utility and registered the Lens Peripheral Illumination Correction data with the camera? I am not sure.
Thanks for your help on this!
Dave.

When Firefox starts options, 'show my windows and tabs' is greyed out??

Tools, options, general - when firefox starts
I wish to pick ' show my windows and tabs from last time' but this is greyed out??

It sounds like you may have some other settings changed that prevent Firefox from restoring your tabs and windows. Here's what to check:
#At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options
#Select the Privacy panel and make sure Firefox will: is set to either Remember history or Use custom settings for history.
#*If Firefox will: is set to Use custom settings for history then make sure that Permanent Private Browsing mode is not selected.
#*If Firefox will: is set to Use custom settings for history and Clear history when Firefox closes is selected, then click the Settings button and make sure that Browsing History is not selected.
#Click OK to close the Options window

"Use Current Page" to save home pages/tabs is greyed out, even though I have a fresh install of ver. 22 with no added plugins or extensions. How can I fix?

When I try to save my home pages / tabs, I can't, because this option is greyed out. I even uninstalled FF with Revo Uninstaller completely, reinstalled with no new plugins or extensions, and it remains greyed out. The only thing that I can do, is pin the tabs, but I wish to be able to use this option. If I can't, I won't know if its Firefox, or malware or? Thank you in advance for any help. Windows 7 Premium SP1, Firefox ver. 22

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Sync Apps tab all greyed out...

In iTunes 10 Apps tab, none of the options can be selected, they are all greyed out. The Sync Apps box is ticked but greyed out and unclickable.
I restored my my iPhone 3G earier today because I had my iPhone replaced at the Apple Store. Since then, every time I connect my iphone to iTunes this occurs, all the applications I already have appear in the box like normal but in grey; I cannot tick or select them... All the other sync functions work perfectly (eg. music, photos, podcasts etc...).
How can I fix this? I tried resetting my iPhone, restarting the computer and turning off restrictions and but all to no avail.

This has happened to me, too. The app icons won't load in the Synch Apps tab. They're all the same, gray, generic icon. The check boxes are really stubborn. I finally got a check mark to appear in a check box, but couldn't un-check it.
Off topic:
While trying to check and un-check an App on that Synch Apps list, I discovered that if you double-click on one of the app names in that list, the large image of the iPhone page, will change to show you where on your phone, that app is located... Handy if it's in a folder somewhere. Also found out that you can drag an app icon from your list of apps (the grid view of all of your purchased apps, accessible in the sidebar) to the name of your connected iPhone (listed in the iTunes sidebar) that dragged app will install on the iPhone...

VL10D user role tab is greyed out

Can someone please help me.
I am using Tcode and the "User role" tab is greyed , means I cant pick any thing. Is there any place in the configuration where I can go and make changes to the tcode.
Thanks,
Sahar

Hi,
To change the profile go to "SPRO --> Logistics Execution --> Shipping --> Worklist --> Configure Lst profile"
To assign this profile to Transaction go to "VL10CUV"
Regards,
K.Annadurai.

My FF crashes many a times and the last opened tabs are not restored. The Restore Previous Session under the history tab is greyed out and the the Session restore button on about:home is not there and im using FF 8.0.1

The tabs on about:home is not there instead there are Firefox advertisements and the restore button under history is greyed out>

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
See also:
*http://kb.mozillazine.org/Session_Restore
*https://support.mozilla.com/kb/Session+Restore

Lens Profile Vignetting Slider greyed out

For lens correction of Sony RX1 images, only the distortion slider is available, and the vignetting slider is always greyed out. Is that normal?

Thanks Jeff,
You are absolutely right.
I thought I had upgraded properly, but I had not.
Ran the updater again, and success.
Thanks again.
Steve

Develop tab is greyed out

Does anyone know why the "develop" tab along the top of Lightroom app will not allow me to click it open? Perhaps because I am using the free 30-day trial it will not let me edit the photos extensively? Please let me know! Thanks.

No your 30 day trial is fully functional.
Make sure you create a catalog and import the images as you cannot work directly on the file system. LR is a non-destructive editor and as such needs the images referenced in a catalog before you can work on them.

Can't edit movie artwork (greyed out on Get Info tabs)

All I need to know is how to be able to add artwork to my movies that are being read form an external hard drive. When I press CMD+I for the get info window the option to even select the Artwork tab is greyed out and unavailabe. How do I get it to add artwork that I have found online?
I did not have this problem when itunes was reading the movies from my actual mac computer it only started when I made itunes read the movies from my external drive. I can still edit the artwork for the ones that are not on my external drive yet and are only on my actual mac computer. Why is this happeneing?

When you add a movie to iTunes you have to make sure it makes a copy of the file in the iTunes Media folder. Otherwise, you can't edit any of the information on the movie or video.
In iTunes 12, go to Edit-->Preferences
In Preferences, go to Advanced and make sure the "Copy files to iTunes Media folder when adding to library".
Unfortunately, you will now have to re-import the movie files into iTunes using "Add File To Library..." Once imported, the movie will sometimes appear under "Home Movies" instead of "Movies" but if you right click on the movie file it will list a menu item called "Get Info" where you can change the "Options" to "Movie". You should also be able to click the "Add Artwork" button.
Hope that helps.

Firewall tab greyed out in System Preferences - have I been hacked?

Hi,
I am running 10.4.11. In System Preferences, under Sharing, the Firewall tab is greyed out, suggesting my firewall is not running or has been tampered with.
So I did some poking:
brendan% sudo ipfw show
02000 844220 100107534 allow ip from any to any via lo*
02010 0 0 deny ip from 127.0.0.0/8 to any in
02020 0 0 deny ip from any to 127.0.0.0/8 in
02030 0 0 deny ip from 224.0.0.0/3 to any in
02040 0 0 deny tcp from any to 224.0.0.0/3 in
02050 388115 29754604 allow tcp from any to any out
02060 690200 900600320 allow tcp from any to any established
02065 0 0 allow tcp from any to any frag
02070 0 0 allow tcp from any to any dst-port 123 in
02080 0 0 allow tcp from any to any dst-port 135 in
02090 0 0 allow tcp from any to any dst-port 8135-8137 in
02100 0 0 allow tcp from any to any dst-port 21 in
02110 0 0 allow tcp from any to any dst-port 500 in
12190 0 0 deny log tcp from any to any
20000 0 0 deny log icmp from any to me in icmptypes 8
65535 92033 23684897 allow ip from any to any
Does this look suspicious? I also tried:
brendan% /usr/libexec/FirewallTool
Firewall Tool: Error, sysctlbyname(net.inet.tcp.blackhole): 1
Firewall Tool: Error, sysctlbyname(net.inet.tcp.loginvain): 1
Firewall Tool: Error, sysctlbyname(net.inet.udp.blackhole): 1
Firewall Tool: Error, sysctlbyname(net.inet.udp.loginvain): 1
Firewall Tool: Error, sysctlbyname returned: -1
Firewall Tool: Error opening socket
Firewall Tool: Error 1, Error setting up V4 Firewall!
Firewall Tool: Error opening socket for V6!
Firewall Tool: Error 1, Error setting up V6 Firewall!
Should I be concerned? Am I being paranoid?
If I want to reset and restart my Firewall, how do I do that, if the tab is greyed out in System Preferences?
If I want to load a backup copy of my firewall configuration, what file do I need to copy from my backup disk? There is no /etc/firewall.conf on my system.
Thanks.

As I recall, if you do any sort ipfw stuff in command line under Tiger, that that made Sharing > Firewall gray out. Try doing a sudo ipfw flush then see if that lets you reconfigure from Sys Prefs.
This article discusses Tiger's default firewall settings with web sharing turned on. That will give you a start in seeing what you should have on. This article may help a little, too, if you are running services or have certain softwares doing different things (gaming, etc.)
Hope this helps some; sorry I can't help you more.

Camera profile tab suddently greyed out

Similar Messages

Maybe you are looking for