Camera Profiles not being installed after adding .dcp files to a CameraProfiles folder.

Hi fellas, recently I downloaded some camera profiles for my Nikon D7000 and Sony RX100MII and added to CameraProfiles folder which can be found under Application Support folder on my mac. However when I open my lightroom and go to Lens Correction those camera profiles would not show up in the option at all. I shoot with RAW, so I don't think format is the root of the issue here. This is my first time trying adding Camera Profiles so I might be making some very fundamental mistakes. I would appreciate any kind of advices, thank you very much.

See the instruction below for the location where your profiles should be placed. If they are placed in the same folder where Lightroom install package places the profiles created by Adobe they will not be recognized.
Your custom Camera Raw & Lens Profiles should be installed to the User folders…
Lightroom 5 no longer uses the shared ProgramData (Windows) / Application Support (Mac) folders for Camera or Lens Profiles. Instead, it stores the built-in profiles with its program files.
When you create camera or lens profiles, they must be stored in the user locations listed below. If you previously stored custom profiles in other locations, you’ll need to move them to these user folders, otherwise Lightroom won’t be able to find them.
Windows—C: \ Users \ [your username] \ AppData \ Roaming \ Adobe \ CameraRaw \ CameraProfiles \
Mac—Macintosh HD / Users / [your username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /
For the lens profiles, substitute the LensProfiles folder for the CameraProfiles folder.
The camera and lens profile file extensions are:
.dcpr—camera profile recipe file used for creating/editing a profile in the DNG Profile Editor
.dcp—camera profile
.lcp—lens profile

Similar Messages

  • Upgraded client not being installed after CU4 upgrade

    I upgraded our SCCM 2012 R2 environment to CU4 yesterday.
    If I use the auto-created packages to upgrade existing clients, it works just fine.
    However - when I do a client push to a new machine, it installs the old version of the client.
    I see this at the start of the ccmsetup log:   'CcmSetup version: 5.0.7958.1501' - which is encouraging, but then a few lines later, I get this:  'Retrieved site version '5.00.7958.1000' from AD for site 'PS1'' - and it then proceeds
    to install the lower version of the client.
    If I look at the record for the MP in the System area of AD, sure enough, it's still listed as 5.00.7958.1000 in the object attributes.
    <ClientOperationalSettings><Version>5.00.7958.1000</Version>
    How do i get AD to recognise that I've upgraded so that the newer version of the client is used during client push?

    If you are referring to the ccmsetup version, that's not the client version, that's simply the ccmsetup bootstrap version and is not specifically indicative of the actual client version being deployed.
    '5.00.7958.1000' is correct for the MP as that corresponds to 2012 R2 and is the client version pushed by the site. Changing this in no way would affect the client agent version installed by ccmsetup. ccmsetup does not try to install the CU, as mentioned,
    that's simply the version of ccmsetup, not the client agent.
    This is semantics for sure, but CUs aren't upgrades, they are updates.
    If you want to avoid all of this, use a startup script to deploy your client agent instead so that you can use the PATCH property and include msp for the CU during client install.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • I purchased Acrobat pdf 21/11/14 and after adding 2 files from my documents folder (both pdf files) one is printable and the other cannot be printed as the print option on the control bar does not function.I need an email address for support now

    I purchased adobe acrobat 21/11/14 I am already having problems relating to printing and creating a pdf document. I DO NOT want to waste my time reading a multitude of FAQ's I want a direct contact with a person actually in support for Adobe to be able to communicate by email and not automated messages. what is the email address for Adobe support please ?
    Andrew Morris this message dated 21/11/14 London time 14:13

    Can any member of the support team please contact me now ? My email: [email protected]

  • My FaceTime camera is not being recognised why? and how can i fix this problem

    I had this program called vdcassistant and apparently its a virus so I removed it and now my FaceTime Camera is not being recognised can someone please tell me how to fix this, and i have no time machine back ups

    Reinstall Facetime application.
    Check system profiler for your inbuilt iSight camera by looking at Hardware > USB > Built in iSight.
    Perform an SMC/PRAM reset:
    SMC RESET:
    Unplug all cables from your machine including the power cable. Hold the POWER button for 10 seconds.
    Plug all cables back in and boot machine.
    PRAM RESET:
    Locate COMMAND+OPTION+P+R Keys.
    Turn on the Machine.
    Hold down these four keys.
    Until you hear the startup sound for a second time.

  • I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time.

    I have installed itunes 11.0.2.26. When I delete a file or podcast I am not being prompted to delete the file from its folder at the same time. How do I restore this facility? I am running a 64bit Windows 7 OS

    Is the media files in question in the iTunes library or elsewhere on the computer?

  • TS3850 I am using a Sony HBR -VLU camera to import into Final Cut 10. Plugging into an I MAc that doesn't have a firewire port. The camera is not being recognized by the computer. The camera is set to play tape too. Why is camera not recognized?

    I am trying to import from the camera into an I-MAC. I'm told the I-mac does not have the firewire port, but has thunderbolt. Is the only way to get video from the camera via a firewire port? Is someone giving me bad information as to the firewire port not being on the I-MAC? The camera is not being recognized. Thanks in advance.

    Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
    There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
    Russ

  • Pictures are not being delivered after saying delivered on iMessage.

    Pictures are not being delivered after saying delivered on iMessage.
    Txting through iMessage works fine. Pic's won't send.
    I turned on and off everything and did all the necessary trouble shooting.
    I'm on a Verizon 4S. and I'm sure Verizon has nothing to do with iMessage system, since it's on its on server.

    bump

  • Hp laserjet p1006 is not being installed on window server2008 64 bit

    hp laserjet p1006 is not being installed on window server2008 64 bit

    Hi,
    The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
    http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
    The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Firefox 3.6.11 / 3.6.12 is not being installed / not opening in my Mac 10.6.4 Plz Help.

    Firefox 3.6.11 / 3.6.12 is not being installed / not opening in my Mac 10.6.4
    Please Help.
    - Bhavesh

    Firefox 3.6.x versions are still updated with security patches (Firefox 3.6.18 is due in about two weeks).
    You are unfortunately out of luck with an Intel Mac and OS X 10.4.11.<br />
    There is a compatible version from for a PowerPC Mac, but no alternative for an Intel Mac.

  • Why are contacts not showing up after added

    why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email

    I am replying to my post with the hopes that someone can please help me!
    I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
    Your help is much appreciated.
    Message was edited by: oneness_podcaster

  • TS1814 I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now???

    I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
    I am from Pakistan.

    The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
    Activation issues are generally the result of the device being hacked or jailbroken.

  • After adding mp3 files the applications will not open or launch

    After adding mp3 files in the music, none of the previous applications will open or start up!

    See my reply on your other post.

  • Some CD's with music burned to it, are not being recognized as having music files on them.

    Some CD's with music burned to it, are not being recognized as having music files on them.

    The format says Mac OS Extended.  All of the settings were set during the disk image restore process.  Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image.  I will just copy all of the information that disk utility has so that you can see it.
    Mount Point :     /Volumes/Mac OS X Install ESD     Capacity :     16.11 GB (16,106,110,976 Bytes)       Format :     Mac OS Extended     Available :     12.3 GB (12,303,499,264 Bytes)       Owners Enabled :     Yes     Used :     3.8 GB (3,802,611,712 Bytes)       Number of Folders :     128     Number of Files :     876

  • When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

    when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

    Hi Kashmore,
    Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
    Cheers,
    Kartikay Sharma

  • Trying to download the free trial of Adobe Acrobat XL Pro.  I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author."  I've repeatedly tried g

    Trying to download the free trial of Adobe Acrobat XL Pro.  I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author."  I've repeatedly tried getting a new installer file, but get the same message every time.

    K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall.  You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

Maybe you are looking for