Camera quality bad after Upgrade

I had been fairly pleased with the upgrade to my phone until last night.  My camera quality is really grainy now.  Is there a fix or is this just something due to the upgrade.  That is really going to disappoint me because before the upgrade my camera took really great photos.
Any advice is greatly appreciated.

jcbag97 wrote:
DroidudeAZ wrote:
I had the macro setting enabled and after the update, I took a couple of grainy photos, but when I changed the setting back to automatic, it started taking pretty decent pictures. In fact, Gingerbread features a continous focus when taking a picture, which is supposed to reduce by 40% the time it takes to take a picture. Check your settings and good luck.
Where can I check my camera settings?  I can't find where to determine if I am set for Macro vs Automatic? 
Launch the Camera App -- turn the phone Horizontal. Tap the screen, once. A set of Options will pop up along the right side of the screen. Click on SCENES ....  Now swipe through them - there are 5 in total; one of them being Macro.  (I don't know why you can't get to these in Portrait mode. Stupid, IMHO.)

Similar Messages

  • Iphone 4 battery-life so bad after upgrade it (ios5)

    iphone 4 battery-life so bad after upgrade it (ios5)

    gone through this for starters
    http://www.macworld.co.uk/how-to/iphone/extend-battery-life-in-ios-7-with-these- battery-saving-tips-3513323/

  • Camera Quality Changed After 10.2 upgrade

    After upgrading to OS 10.2. the quality of the camera just changed. With the flash on, the images are sooo dark you can hardly see the images. A lot clearer when you take a picture without it. regardless if the area is really dark, a bit dark or with enough light. The rleft side is without the flash and the right is the one with flash.

    Let me suggest you manually install the most recent official OS, 10.2.0.1803.
    Upgrading OS10 devices using Autoloader
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Slow network on a6000 plus and camera quality worst after recent upgrade.

    The recent smartphone given by the lenovo is good but the network is too slow as compared to other mobile companies who work in the same network area.
    Also the recent upgrade of vibe ui makes the camera quality worst. There seems grains now in the camera.
    Please fix these two.

    hi
    I have the same problem ... I will try to call Apple .. maybe they can help...

  • Photo quality decrease after upgrade on xperia neo

    After my upgrade to android 4 I have seen that my photocamera don't have the same quality before. Photo are made darkness and not with the same good quality. Is this only a my problem?
    Flavetius

    That is odd, I have not been aware of any drop in camera quality via an update with this model. With this being the case I would advise running the update again and choosing the "Repair" option.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Camera not working after upgrade to io5

    Hi
    i have just updated to io5 and icloud which are fine except the camera does not seem to work anybody same

    i presume its the same camera apps as before the update but were as before you wouldclick on the button on screen and the shutter would open to take photo it doesnt open i read somewhere were you can use the volume button to take photo after upgrade but this doesnt work either

  • HT2090 External iSight camera quit working after upgrade.

    My external iSight camera quite working after OS upgrade. It appears the Firewire port is dead. Camera doesn't turn on, no green light. The camera is not recognized by any software.

    Restart your Mac and troubleshoot using http://support.apple.com/kb/HT2090 suggestions.
    Be sure to test more than one Apple app in more than one user account.  Do NOT use the "Guest" account for this test.  If you do not have more than one user account for the testing, create a new one now.  (A "Standard" account is all you need for testing.)
    If your trouble persists, when you post back here tell us:
       (1) what version of OS X you use.
            (You can find this with your Mac's  > About This Mac menu command.)
       (2) Whether the "upgrade" you mean was an OS X upgrade, an iOS upgrade, or both,
       (3) whether your external iSight works with Apple apps like Photo Booth, iMovie, etc.
            If not, confirm that the symptoms are EXACTLY the same in every user account.
    We will offer more specific suggestions based on the details you provide in your response. 
    Message was edited by: EZ Jim
    Mac OSX 10.8.2

  • HT4623 Can I use lightning SD camera card reader after upgrading my iPad 4 to iOS. 7?

    Hi! All,
    I am using lightning SD camera reader with my iPad 4 running with iOS 6 without any problem. But I would like to upgrade to iOS 7. I saw some reviews
    after upgrading the card reader is not working. I contacted apple support community people for the above issue recently through chat. They said the device should work even after upgrading. I have not yet upgraded. But iOS 7 is tempting with its amazing look. What do I do? If I upgrade and my SD card reader wont work then I will be in great disapppointment. Please help if any body has answer for my problem..
    Message was edited by: hemanthkumar.narsetti
    Message was edited by: hemanthkumar.narsetti

    If your SD card reader is from Apple, you shouldn't have any problems. If your card reader is from a 3rd party source, it's possible to have a problem. Do the update.
     Cheers, Tom

  • Font Display Quality Bad After Update

    Hello all,
    my font display is really bad since upgrading to Tiger. I have Font Smoothing Style set to automatic and have tried light and others but everything appears over-sharpened. For example, as I type this, the font has an extereme sharpening, so much so that I see highlights on the top edges of characters. Regular Verdana appears in both Safari and Firefox as bold, and bold looks black. All in all, everything looks awful. I am using an Apple Cinemascreen. Anyone have any idea what could be causing this?

    I don't know FontExplorerX but check its compatibility with Tiger. You want to try disabling this font manager client?
    -mj
    [email protected]

  • Flash light is not working in camera or Torch after upgrade

    Hello
    My S850 Flash light is not working while I click any Picture or while turning the torch ON. It was wprking perfectly before but after Upgrade it stopped working.
    baseband version is: S850.ROW.V109,2014/09/23
    BUILD NUMBER: S850_ROW_211_140923
    Kalpesh

    Hi
    Sorry...The flash isn't working when you take pictures or the torch/flashlight isn't working?
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • IPhone 4 Camera Autofocus Delay after Upgrade to iOS 5

    I just updated my iPhone 4 to iOS 5 and now I noticed the camera auto focus is severly delayed, and constantly searching for focus.
    I compared it side by side with my son's iPhone 4 which I did not update to iOS 5 and there is a distinct difference in speed both in picture taking and video when it comes to focusing.
    Anybody else seeing this?
    Apple, can you please fix this, as it is now impossible to take a quick pict of my kids due to the constant focusing attempts.

    I just can;t beieve this, I would never have bought the phone if I knew updating it would make it unuseable for any
    thing other then complete novice use. I have done everything to make this work since the upgrade to IOS5 made the "bottom line" quality rubbish. Has anyone zoomed into the image and looked at the quality? If not check it out and you will see it is unuseable.
    I'm sick, I use the phone exclusivly for photographic applications and I've spent a fortune on specific photo apps and hardware, I'm a Beta tester for GoPano (360 video) and I wish I had never invested in the iPhone. If Apple can't get a basic thing like focus on the camera right after an upgrade then I don't want the phone..it's useless to me.
    Can anyone please let me know how I can get a refund on the phone, or who I talk to to cease ownership, as far as I'm concerned the phone dosen't work to it's specifications.
    Please reply as I feel like a fool for buying the iPhone 4. Can anyone tell me how to revert my phone to IOS4? It worked then, not fantastic, but it worked, Seems to me when you upgrade the op system that its ireversable.
    HELP PLEASE!

  • Camera not working after upgrading to vista ultimate

    So I upgraded to vista ultimate and since then the camera hasn't worked. I don't have it turned off, and i went to device setting to see if it was working properly and also tried updating the driver. Everything seems to be in order, the camera just doesn't work. anyone have any ideas?

    is it ultimate 64? if you dl the driver from lenovo's website it probably doesn't support 64bit, i had tons of trouble with my camera before too but eventually it kinda fixed itself. I think the device just wasn't being recognized by windows and the driver never completed installation but after a few reboots it gave me a notification saying that it was indeed finished installing and since then it worked great.

  • Lumia 720 camera gets bad after updating to Amber?...

    Hi guys,
    I got the Amber Update for my 720 last night. It's a nice little update, except the camera seems to perform worse. The images always seems to be washed out and more blurry. in low light it takes (much) brighter photos, but also a lot noisier and blurry. And the images always seems to have an awful green colour tint. I'm a bit annoyed right now . Anyone else experience this on their lumia?
    I attached two photos  for reference. One is taken before the update, and the other one is taken after it.
    Attachments:
    Before Amber.jpg ‏1411 KB
    WP_20130928_007.jpg ‏2152 KB

    LEriCHS wrote:
    Hi guys,
    I got the Amber Update for my 720 last night. It's a nice little update, except the camera seems to perform worse. The images always seems to be washed out and more blurry. in low light it takes (much) brighter photos, but also a lot noisier and blurry. And the images always seems to have an awful green colour tint. I'm a bit annoyed right now . Anyone else experience this on their lumia?
    I attached two photos  for reference. One is taken before the update, and the other one is taken after it.
    the two images you posted definitely show worse image after update :/
    aside from increasing my average battery consumpution on standby, the amber did not affect the quality of my camera / fotos. i have no foto comparison for before n after, but with my overall experience in photography, id say the amber update somewhat improved the camera's low light performance, notwithstanding grain ofcourse.
    colors seem to still be acceptable. i think nokia has been able to improve their post processing software along with the update (as far as my experience is concerned).
    maybe a factory reset n re-install of the update would help. but before you do that, try to think really hard if you were in the right camera settings / using 'lenses' or other camera apps, etc.
    note : always backup your data before wiping the os

  • HDMI TV launcher and Camera quality issue after update to android 4.0.4

    Hello ,
    I've bought a Xperia S LT26i with android 2.3.7 ,all went ok ,camera worked ok ,HDMI and tv launcher no issue.
    After i've made a OTA upgrade to Android 4.0.4  6.1.A.2.55.
    Now after this update ,TV Launcher over HDMI does not work anymore and all potos from camera dooring day time or night have lots of noise.
    Also in video mode ,is the same ,using any kind of settings from camera ,dose not doo any kind of noise reduction.
    Any idea how i can fix this maybe ?

    I suggest that you try to run a software reinstall using SUS.
    http://www.sonymobile.com/gb/tools/update-service/
    If the problem still remains you should contact your local support team, to have the phone examined and fixed at an repair center.
    http://www.sonymobile.com/global-en/support/contact-us/contact-info/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • S12 Easy Cam not working after upgrade to Windows 7

    Upgraded to Win 7 all went most well but the easy cam no longer works. When you do the FN-ESC the icon indicates that the camera is turned on but no screen with an image appears. Any help would be great, thanks in advance.
    Best Regards
    Brian

    I have the S12 (Intel version) camera working using the program from the Y410 laptop.
    Google  IN1STW11ww3.exe and it hopefully be the first entry.
    The program will say it is not compatible but it works.
    On the first screen click on "Don't show this message again" then click "Run program"
    The next time you start the program it will bypass that first screen.
    Hope this helps
    D i c k Miller
    Hot Springs Village, Arkansas  USA
    S12 Intel, 2GB ram, 160 GB HDD,
    Windows 7 Home Premium.
    Also 3000 Y410 Laptop with Win7 X64 Home Premium and a 3000 K100 with Windows Home Server

Maybe you are looking for

  • Lines on display

    there is this verticle angle at which if i see the screen i see these lines not ecxactly lines but bars moving i dont see it if i am at a normal angle but if the screen is too inclined... does t happen with everyone or am i the only one..

  • How to create an XSD file from xml

    Hi, Is there any way to generated an XSD file from an already existing XML file. Does Jdeveloper 10g , has any feature to create the xsd file automatically? Please advice Regards

  • Payment Terms base date

    Hi All; For payment Terms, when the system starts calculating the number of days: from GR date, IR date, or baseline date? Also can we make the GR date as the base date for payment?

  • Drop Ship logical receipt

    Dear experts when we place dropship sales order... 1)once customer receive goods from supplier how will know that customer received? 2) once customer received will place logical receipt means when we place receipt we need to give sub inv which sub in

  • How to deselect the itemlistbox entries

    hi,     using itemlistbox for currency display, once user select the value and press the save button. In itemlistbox value want to be deselect. while am using invalidate() method it clearing the value in listbox . i don want to clear just deselect th