Camera raw 4.5 upgrade

Is it possible to upgrade Camera Raw 4.5 that came with Elements 7.0. I'm using Windows xp.I tried downloading version 9 but it says its the wrong version. I am trying to get a version that supports the gradient tool which doew not seem to appear in CR 4.5.
Al

None of the camera raw versions for windows photoshop elements have the Graduated Filter if that's what you mean by gradient tool.
more info on the differences between camera raw in photoshop elements and photoshop:
http://helpx.adobe.com/x-productkb/multi/camera-raw-differences-photoshop-photoshop.html
There is a gradient tool in the pse 7 editor though.
And the latest camera raw for pse 7 is 5.6:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4626
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

Similar Messages

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I am trying to download the Adobe Camera Raw 7.1 upgrade for CS6. The files will not unzip.

I am trying to download the Adobe Camera Raw 7.1 upgrade. The zipped files download, but when I try to extract the zipped files, I get an error message saying that there is already a file with the same name as the folder name I specified, and that I should specify a different name. The four zipped components are META-INF [Folder], payloads [Folder], AdobePatchInstaller [Application file\, and payloads [File]. Evidently, there is a conflict between the payloads folder and the payloads file, but I cannot be sure. All filenames came from the download.

Are you using CS6 applications ? Camera Raw 7.1 is only compatible with CS6 applications. Try this as mentioned on http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391
For Photoshop CS6 and Creative Suite 6 customers, we recommend that you install Camera Raw 7.1 by selecting Updates from the Help menu and follow the on-screen dialogs to download and install the latest available Camera Raw update. You can also click the link below to download an installer that replaces the existing Camera Raw plug-in with Camera Raw 7.1 for all CS6 applications.
Thanks
Nikhil

Trying to install the Elements 9.0.3 upgrade and Camera Raw 6.5 upgrade.

I installed Photoshop Elements 9 to my Mac and am trying to install the Elements 9.0.3 upgrade and Camera Raw 6.5 upgrade. The contact customer help button takes to me to a "This serial number is not for a qualifying product" page.

Try these direct download links:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5012
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5263

Upgrade Camera RAW in older PS ver.

Hello, just a quick question, can you upgrade Camera RAW with out upgrading PS or Bridge?
I have PS-CS3 running on a PC and I see there are some nice features in CR 6.3. Can this be done or do I need upgrade PS and Bridge - funds are low!
Thanks,
Captain 1854

Thanks Jeff, That's all I needed!
Captain------------

Cannot install Camera Raw 5.4

I get messages telling me that I should download and install Camera Raw 5.4. But when I download it and try to install it, I get a message in a popup windown telling me there is an error and it will not install giving me the option of trying again, doing it later, or aborting. When I go to Photoshop CS4 my plugin shows Camera Raw twice. When I click on the first installance (help-plug-in), I have a window popup telling me that it is Camera Raw 5.3.0.15, when I click on the second instance of Camera Raw, I get an error message telling me that it already exists.
Is there a way of uninstalling Camera Raw plugin, and installing the new Camera Raw 5.4? Or, do I want to have both of them in which case, how do I install Camera Raw 5.4?

Search all the directories under your c:\Program Files\ for camera raw.8bi
(or camera*.8bi) and see how many you find.
If you only find one and it's in:
C:\Program Files\Common Files\Adobe\Plug-Ins\CS4\File Formats
then there aren't really multiple copies and I'm not sure what you tell you.
If you find more than one, then try renaming the one not in the directory
listed, above, to
Camera Raw.8bi.err or something then try the camera-raw 5.4 upgrade, again.

Hack to install Aperture Camera Raw 4.06 on 10.6.8 Snow Leopard

I bought a Nikon D7100 and was surprised that I can't upgrade my Aperture 3.4.2 running on 10.6.8 to work with RAW images. I thought someone might have a hack to install this camera raw update without upgrading to 10.7.5? Any help is appreciated.

To run Aperture 3.4.5 you really need MacOS X 10.7.5 or 10.8.2 or later.
The differences between the latest Lion Version or Mt. Lion and Snow Leopard are more than a few files. As William Lloyd said, there is no way to patch this by adding a few files. The new generation of Mac OS X systems has a completely different architecture, and Aperture has been built to profit from the system services, most importantly the security features - sandboxing - a very different process system, 64bit only code, and iCloud support.
If you are interested in the differences, you may want to have a look at these ars Technica reviews:
The process model: http://arstechnica.com/apple/2011/07/mac-os-x-10-7/8/
The security features: http://arstechnica.com/apple/2011/07/mac-os-x-10-7/9/
Regards
Léonie
Does your Mac not support 10.7.5?

Troubles with update mechanism in Photoshop CS6 installing Camera Raw 7.3 update

Greetings,
Attempted an update using the update mechanism from Bridge. CS6 Design Premium on Mac. Received a couple error messages when it completed. Foolishly I did not write down the details. I thought I could just run the update again. When I attempted this, received mesage saying I was updated. But when I use Camera Raw plug-in within Bridge, it says I am still using version 7.2...
How may I attain a sucessful Camera Raw 7.3 upgrade?
I also use Lightroom which sucessfully upgraded,to 4.3 (with Camera Raw 7.3), but I often too use the Camera Raw Plug-in from within Bridge and would like to be on the same 'level'.
I thank you for any insight.
Best regards,
Alan

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Camera Raw forum, where you'll get more specialized help.

Camera Raw has disappeared.

Just upgraded to Mountain Lion. not sure connected, but I right click in Bridge and the open with to ACR is gone.
Just did a command i on the file and it brings up apps and I don't see ACR or Camera Raw anywhere.

Just upgraded to Mountain Lion. not sure connected, but I right click in Bridge and the open with to ACR is gone.
Just did a command i on the file and it brings up apps and I don't see ACR or Camera Raw anywhere.

Troubles with auto update mechanism and Camera Raw 7.3 update

Greetings,
Attempted an update using the update mechanism from Bridge. CS6 Design Premium on Mac. Received a couple error messages when it completed. Foolishly I did not write down the details. I thought I could just run the update again. When I attempted this, received mesage saying I was updated. But when I use Camera Raw plug-in within Bridge, it says I am still using version 7.2...
How may I attain a sucessful Camera Raw 7.3 upgrade?
I also use Lightroom which sucessfully upgraded,to 4.3 (with Camera Raw 7.3), but I often too use the Camera Raw Plug-in from within Bridge and would like to be on the same 'level'.
I thank you for any insight.
Best regards,
Alan

I updated CR to 7.3 yesterday and had nothing but problems after that. When I opened a photo in CR, it still showed 7.2 even though I got a message that said update successful. I had lots of problems using bridge which caused my computer to freeze. Using Mozilla Firefox was also freezing. I had to actually use the "off/on" button on my computer tower to shut it down. I was unable to restart. Lots of problems. Finally used "system restore" to an earlier date (which wipes out all updates back to the date I chose), and that worked. NO more problems. I'm waiting a while before trying to update CR to 7.3.

Upgrade of Lightroom 4 with newest Camera Raws possible?

I'm still on Windows XP. My question: Can I buy Lightroom 4 and update Camera Raw files subsequently? Or is the only chance to use newest camera raws by using Lightroom 5? I want to get access to Olympus EM-5 Raw files (in addition to EOS 5D MII) and want to avoid for now changing the windows system.
Any advice very much appreciated!

Lightroom 4 is no longer sold. It would depend first on your being able to find a copy for sale. That said, you would only be able to upgrade your camera compatibility to LR 4.4.1. Any cameras added after 4.4.1 was released would be unavailable to you.
At this point the only alternative that allows you to remain on XP and continue to get the newest cameras is to download and implement in your workflow the free Adobe DNG Converter. It is XP compatible (at least for now) and allows access to the latest cameras, and its DNG files are backwards compatible to all versions of Lightroom.

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
Camera Raw: How to use Adobe DNG Converter - YouTube

How do I upgrade camera raw codecs in adobe cs 5

How do I upgrade The CAMERA RAW CODECS in Adobe CS5?

What do you mean? Are you looking for thumbnails in Windows Explorer (which is most often what the word "codec" is associated with)? Or something else?
If something else, please state what camera you have. Old versions of Camera Raw will not be able to open files from new cameras.
You can determine exactly when Adobe released support for your new camera in Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If your version of Photoshop cannot support your camera directly, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
-Noel

I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw. However, it will not download from the "Update" option in CS6.

I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera). However, it will not download from the "Update" option in CS6. I have tried over 10 times - it just says update is not working. and I cannot find an alternate way of downloading this file. So I still can use my camera, even thought I paid to upgrade. HELP please.

What OS do you have? You say you have explained what you had (computer/opsys) but I honestly don't see it here. If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system. There is more information here (look specifically for the "Revert to 8.3 ..." titles).
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
What you've done/written in your last post confuses things further, unfortunately. Photoshop 13.1 is strictly a Creative Cloud version. The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
And as far as I can recall, that version can work on Windows back to XP:
System requirements | Photoshop
I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
Here's what I suggest you try:
1. Remove Photoshop entirely with the Creative Suite Removal Tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
2. Install Photoshop CS6 from your original media or from here:
Download CS6 products
3. Update the application using its own Help - Updates process. That really should get you the latest Camera Raw version that will work. If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
-Noel

CS3 Upgrade & Camera Raw 4.5 = MAJOR HEADACHE!

I bought a D300. Then found out that the only way to use Photoshop with it was to upgrade the Camera Raw plug-in to 4.5, which could ONLY be used with CS3. So NOW I have THOUSANDS of dollars in camera gear and software that has caused me more headaches than putting 4 kids through high school.
P4, 4 GB RAM a gazzilion bytes of hard drive space and I'm getting the dreaded blue screen of death after going through 3 or 4 photos in CS3's Bridge.
PFN_LIST_CORRUPT or something like that. I've emailed support and nothing. Very disappointing to say the least.
I've got it down to faulting after going through about 10 pics now but NOW, on SOME of the Nikon (.NEF) files, it's telling me that "Photoshop CS2 cannot be found!"
I'm sorry, but I'm very close to dousing this thing with lighter fluid and sending the ashes back to Adobe. I have over 1000 photos to process from the weekend it's it's IMPOSSIBLE to do it with these errors.
YES, I did the Camera Raw update per the instructions.

Elginet - your error message points to RAM problems. Perhaps your PS uses more RAM than other software and therefore the error only shows up when using PS. You could try to remove part of the memory just to locate the problem if it is within one or two memory banks. With 2 GByte the computer should run PS even though a bit slow. Once you located the problem you could either replace the defective memory or replace the whole set depending on your configuration.
It is not necessarily a hardware fault it could be a setting for memory access in the BIOS.
Basically CS3 and ACR4.5 work fine on many computers and it is very stable on my machine under Win XP-pro. Be certain it is not a general problem.
Best of luck that you can resolve your problem.
Cheers
Walter

Camera raw 4.5 upgrade

Similar Messages

Maybe you are looking for