Camera Raw 5.4 Plug-In

I am sure that I am missing the obvious but here is my issue:
1.  I am running Windows Vista 32 bit.
2.  I have installed CS4 with no problem.
3.  The prompt tells me to install 5.4 (apparently 5.0 is there right now)
4.  I am able to download the plug-in with no problem.
5.  When I intall, the progress bar gets to about half-way and I get the prompt:  I need to close CS4 or Bridge.  Neither of those are open.
Any suggestions?
Thank you.

Look in Task Manager.
One or both of them may be running under Processes.
Use End Process.
My advice is not to use the automatic startup for Bridge.

Similar Messages

  • Has anyone encountered this error message with Adobe Camera Raw 6.3 Plug-in?

    Ever since I installed the Adobe Camera Raw 6.3 Plug-in for Elements 8 I get the following error message when I launch Editor:
    "The Application or DLL C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 8 \File Formats\Win 64\Camera Raw. 8 bi is not a valid Windows Image. Please check this against your installation diskette" 
    (As I downloaded the plug-in I don't have the option of checking against the installation diskette as the error message suggests.)
    If I click OK on the error message the launch process re-commences and Editor eventually opens and operates effectively.
    Does anyone have a suggestion about how I might remove this error message? Alternatively, do I run a risk by continuing to simply ignore the error message?
    Thanks
    Kinyo Jim

    Delete the camera raw 8bi file from the File Formats folder.
    Download ACR 6.2 and extract the files.
    Drag the camera raw 8bi file from the download extract folder into the File formats folder.
    C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 8\File Formats\
    If you are using a 64-bit edition of Windows, then move the plug-in file from the unzipped download folder by navigating to:
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 8\File Formats\

  • Which PS Elements has min camera raw 7.3 plug-in?

    Which PS Elements has min camera raw 7.3 plug-in?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • Install Camera Raw 6.3 plug-in error message u44m2l218

    Help Anyone,
    I have Photoshop CS5 and installed Camera Raw 6.4.1 Plug-in  in error, as it will not work with Nikon D7000.  I have tried to install Camera Raw 6.3
    and CS5 will not take it and I get the error message u44m2l218.  Does anyone know how I can remove 6.4.1 plug-in and get 6.3 installed.
    Thank you for helping me.

    There's a Camera Raw-specific forum here:  http://forums.adobe.com/community/cameraraw
    However, this is the first I've heard that Camera Raw 6.4.1 wouldn't work with a D7000...  Can you please try to be more specific about what error you're seeing?
    I have a suspicion that perhaps you really haven't upgraded Camera Raw properly, as versions from 6.3 onward are supposed to be able to handle D7000 images.
    -Noel

  • Camera RAW 4.6 plug-in for CS3 on Mac - download problem

    When I download and try to install Camera RAW 4.6 on my Mac (OSX 10.7.5, Safari browser) I get the following message "Could not complete your request because photoshop does not recognize this type of file."  Suggestions?

    You're trying to open the plug-in instead of manually installing it in the appropriate location (folder) and then relaunching Photoshop. 
    Read the instructions again.
    This is the correct path to the File Formats folder.  Notice that you start in the ROOT LEVEL library, not your User Library:

  • Camera Raw and NIK Plug-in

    I have a problem with NIK-Plug-in and Camera Raw / Photoshop CC / Bridge CC. After installation of the latest version of NIK-Plug-in I lost the lens profiles in ACR if going directly from Bridge CC to Photoshop CC with NEF-Files. If using the Bridge CC ACR the problem does not occur.
    Is this a known problem ? What is the solution ?

    Try the solution outlined by Google in this message:
    http://forums.adobe.com/message/5998099#5998099
    The Nik Selective Tool causes issues so needs to be disabled.

  • Photoshop CC not recognizing installed camera raw 8.3 plug-in

    I have just installed DNG/Camera Raw 8.3 on my computer, and it is running in LR, but when I try to edit a LR photo in PS CC, it says I need Camera Raw 8.3. PS CC is only running Camera Raw 8.2.  How do I get PS CC to see the 8.3 version? Better question might be does the DNG 8.3 download include CR8.3, and if not, how do I get CR8.3?

    No, the DNG and ACR updates are separate.  You should be able to invoke the ACR update from the Help menu in Photoshop.
    Richard Southworth

  • Using Smart Filters to keep Camera Raw and filter plug-ins access

    I am wondering if what I am trying to do is reasonable and possible.
    I know I have seen some workarounds where you can open a RAW file directly in Camera RAW,copy a background, make it a smartfilter, and do your editing and then I guess you can go back and still access your Camera RAW settings which definitely has value.  This kind of is outside my normal workflow as I normally start with Lightroom and that won't work I don't think from Lightroom (unless perhaps if I send it to PS "without LR adjustments?".  Now of course you always have access to the original file and starting settings in lightroom, but once you layer PS edits and layers on top of that, you really can't go back.  I'd be willing to start from within Photoshop if somehow this would work.
    And, I regularly use smartfilters when I use my NIK filters in PS.
    What I ran into today was a situation where it would have been VERY nice to be able to go back to my camera RAW starting develop settings before I went down a long path of Colorefex and Silverefec filters.  Well, at the end, I determined my RAW sharpening was too strong at the beginning of my workflow.  So I was able to get back to my filter settings of course, but I could not get back to Camera Raw to adjust that.
    So, is there a way to somehow keep your Adobe Camera RAW settings available to access, however while still being able to layer NIK filters also in a smart filter situation?  Is this a multiple smartfilter soluton?
    Thanks for any input,
    BJBBJB1

    Jeff,
    Thanks, I do have the same version of ACR in LR3 and CS5.x.
    I am willing to deal with the larger file sizes.  So the question is, how do I do it from either within PS or from Lightroom?
    Do I need 2 layers, one for the ACR smartfilter and one for my NIK filters.  Can I do it with one?
    BJBBJB1

  • "error loading updater workflow"...trying to install camera raw 6.3 plug in

    A very helpful response to an earlier question got me to realize the need to instll the latest raw plugin....6.3....
    Now when I go to install I get "error loading updating workflow"
    any help on this one???
    Thanks
    I have CS5  using windows 7 on my dell inspiiron 1545 pc......this was an update t cs5 from previously installed cs4
    version

    "PDA file "and "changed PDA file...."
    PDA file
    12/21/2010 11:35:13 PDApp - Build Version - 1.0.175.0
    12/21/2010 11:35:13 PDApp - Logging Level verbosity Set  to 4
    12/21/2010 11:35:13 PDApp.CommandLineParser - Parsing the command
    line provided. Number of command line arguments is 6
    12/21/2010 11:35:13 PDApp - DWA AppletID argument not specified on
    command line. Trying to find the existing instance
    12/21/2010 11:35:13 PDApp - This is the first instance so creating a
    thread for listening to the created pipe
    12/21/2010 11:35:13 PipeThread - Pipe thread started
    12/21/2010 11:35:13 PDApp - Starting AsyncMessageProcessor
    12/21/2010 11:35:13 PDApp.AsyncMsgProcessor - AsyncMsgProcessor
    initialized...
    12/21/2010 11:35:13 PDApp.AsyncMsgProcessor - AsyncMsgProcessor
    started. on thread id = 4960
    12/21/2010 11:35:13 PDApp - Detecting Applet Database Library file...
    12/21/2010 11:35:13 PDApp - Fetching Applet registeration
    information...
    12/21/2010 11:35:13 PDApp.AppletManager - AppletManager initialize...
    12/21/2010 11:35:13 PIM - Build Version - 1.0.175.0
    12/21/2010 11:35:13 PIM - Logging Level verbosity Set  to 4
    12/21/2010 11:35:13 PIM - CREATE PIM Instance ...
    12/21/2010 11:35:13 Utilities - File does not exist
    12/21/2010 11:35:13 PIM - trying to createOrUpdatePIMDbSchema.
    12/21/2010 11:35:13 PIM - Current db schema version on machine 1.
    12/21/2010 11:35:13 PIM - Current db schema version to install 1.
    12/21/2010 11:35:13 PIM - PIM DB Schema is up to date. Current schema
    version is 1.
    12/21/2010 11:35:13 PIM - PIM Database is Up To Date.
    12/21/2010 11:35:13 PIM - PIMSqlite closeDB status 0
    12/21/2010 11:35:13 PIM - FREE PIM Instance ...
    12/21/2010 11:35:13 PDApp.AppletManager - Applet database path -
    C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..
    12/21/2010 11:35:13 PDApp.AppletManager - PIM library path -
    C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\AdobePIM.dll
    12/21/2010 11:35:13 PDApp.AppletManager - Loading PIM library...
    12/21/2010 11:35:13 PDApp.AppletManager - Getting applet data from
    Applet database
    12/21/2010 11:35:13 PDApp.AppletManager - All installed pakages
    version string (pim_getCurrentPackagesVersion) is
    DWA:1.0.172.0|LWA:1.0.175.0|PDApp:1.0.175.0|UWA:1.0.175.0
    12/21/2010 11:35:13 PDApp.AppletManager - Registering Applets...
    12/21/2010 11:35:13 PDApp.WindowManager - Initializing native
    WindowManager
    12/21/2010 11:35:13 PDApp.WindowManager - Creating window instance
    12/21/2010 11:35:13 PDApp.WindowManager - Checking for appletID and
    appletVersion given in CommandLineOptions
    12/21/2010 11:35:13 PDApp.WindowManager - Creating APE stage instance
    12/21/2010 11:35:15 PDApp.ExternalGateway - MessageHandler
    initialized...
    12/21/2010 11:35:15 PDApp.ExternalGateway - ExternalGateway
    initialized...
    12/21/2010 11:35:15 PDApp.ExternalGateway - NativeCommandHandler
    initialized...
    12/21/2010 11:35:15.431 PDApp.StartupCommand Logging Level verbosity
    Set to  INFO
    12/21/2010 11:35:15.432 PDApp.StartupCommand Processing the startup
    Command
    12/21/2010 11:35:15.439 PDAPP.AppletManager Starting Applet
    registeration...
    12/21/2010 11:35:15.457 PDAPP.MainDisplayMediator Looking up for the
    Exact versioned applet for ID :UWA_UI
    12/21/2010 11:35:15.479 PDAPP.AppletManager Loading Applet: UWA_UI
    Version = 1.0
    12/21/2010 11:35:15.514 PDApp.ZStringLoader PDAPP SWF - locale set
    to - en_US
    12/21/2010 11:35:15.570 PDAPP.AppletManager Loading progress0 out of
    521002
    12/21/2010 11:35:15.572 PDAPP.AppletManager Loading progress65536 out
    of 521002
    12/21/2010 11:35:15.574 PDAPP.AppletManager Loading progress131072
    out of 521002
    12/21/2010 11:35:15.583 PDAPP.AppletManager Loading progress196608
    out of 521002
    12/21/2010 11:35:15.585 PDAPP.AppletManager Loading progress262144
    out of 521002
    12/21/2010 11:35:15.588 PDAPP.AppletManager Loading progress327680
    out of 521002
    12/21/2010 11:35:15.590 PDAPP.AppletManager Loading progress393216
    out of 521002
    12/21/2010 11:35:15.592 PDAPP.AppletManager Loading progress458752
    out of 521002
    12/21/2010 11:35:15.594 PDAPP.AppletManager Loading progress521002
    out of 521002
    12/21/2010 11:35:16.023 PDApp.ExternalGateway Recieved Applet Loading
    Completion
    12/21/2010 11:35:16.027 UWA.ZStringLoader Trying to load ZString for
    preferred locale - en_US
    12/21/2010 11:35:16.087 UWA.ZStringLoader Applet locale set to -
    en_US
    12/21/2010 11:35:16.319 UWAApplet.Startup Processing the startup
    command
    12/21/2010 11:35:16.324 UWA.LoadWorkflowCommand Processing the
    LoadWorkflowCommand
    12/21/2010 11:35:16 PDApp.AppletManager - Loading Applet - UWA_Native
    for WindowID - 1
    12/21/2010 11:35:16 UWANative - Build Version - 1.0.175.0
    12/21/2010 11:35:16 UWANative - Logging Level verbosity Set  to 4
    12/21/2010 11:35:16 UWANative - Updater in patch mode
    12/21/2010 11:35:16 UWANative - Error in mdbOpenSessionNoCreate 1
    12/21/2010 11:35:16 UWANative - Failed to initialize Updater Core
    12/21/2010 11:35:20 Utilities - Directory not present
    12/21/2010 11:35:20 UWANative - Could not delete the temp folder "".
    12/21/2010 11:35:16.594 UWA.LoadWorkflowCommand The start applet did
    not return the result xml. Startapplet returned
    12/21/2010 11:35:16.595 UWA.LoadWorkflowCommand Cannot start
    UWANative Applet
    12/21/2010 11:35:20 PDApp.AppletManager - Un-loading Applet -
    UWA_Native for window ID - 1
    12/21/2010 11:35:20 PDApp.ExternalGateway - Callng the finalize
    function of the applet
    12/21/2010 11:35:20 PDApp.ExternalGateway - Unloading applet
    12/21/2010 11:35:20.878 PDApp.HostMessageHandler Recieved force
    window close message
    12/21/2010 11:35:20.878 PDApp.HostMessageHandler Sending message to
    native
    12/21/2010 11:35:20 PDApp.WindowManager - Window destruction reached
    for ID - 1
    12/21/2010 11:35:21 PipeThread - Pipe Connected. Waiting for data to
    come on pipe
    12/21/2010 11:35:21 PipeThread - 2 bytes read on pipe
    12/21/2010 11:35:21 PipeThread - Data recieved on pipe. Sending the
    data to the main thread to process and show window
    12/21/2010 11:35:21 PipeThread - Message Sent to main thread
    12/21/2010 11:35:21 PipeThread - Disconnecting pipe
    12/21/2010 11:35:21 PipeThread - Pipe Disconnected
    12/21/2010 11:35:21 PipeThread - Terminating the pipe thread
    12/21/2010 11:35:21 PDApp - Terminating native MessageQueueManager
    12/21/2010 11:35:21 PDApp - Terminating native AppletManager
    12/21/2010 11:35:21 PDApp.AppletManager - AppletManager destructed
    12/21/2010 11:35:21 PDApp - Terminating WindowManager
    12/21/2010 11:35:21 PDApp.WindowManager - Destroying PDApp main
    window's
    12/21/2010 11:35:21 PDApp.WindowManager - Destroying PDApp main
    window's sucessfully
    12/21/2010 11:35:21 PDApp - Terminating ExternalGateway
    12/21/2010 11:35:21 PDApp.ExternalGateway - ExternalGateway
    destructed
    12/21/2010 11:35:21 PDApp - Terminating MessageHandler
    12/21/2010 11:35:21 PDApp.ExternalGateway - MessageHandler
    finalize...
    12/21/2010 11:35:21 PDApp.ExternalGateway - MessageHandler destructed
    12/21/2010 11:35:21 PDApp - Terminating NativeCommandHandler
    12/21/2010 11:35:21 PDApp.ExternalGateway - NativeCommandHandler
    destructed
    12/21/2010 11:35:21 PDApp - Terminating AsyncMessageProcessor
    12/21/2010 11:35:21 PDApp.AsyncMsgProcessor - Destroying
    AsyncMsgProcessor
    12/21/2010 11:35:21 PDApp - Terminating NativePlatformHandler
    12/21/2010 11:35:21 PDApp - Terminating logger
    PDA changed file
    12/21/2010 03:00:24 AAMUpdatesNotifier - Build Version - 1.0.175.0
    12/21/2010 03:00:24 AAMUpdatesNotifier - Logging Level verbosity Set
    to 4
    12/21/2010 03:00:27 Utilities - File does not exist
    12/21/2010 03:00:41 AAMUpdatesNotifier - CFU .... StatusCode(41)
    ErrorCode(212)
    12/21/2010 03:00:41 AAMUpdatesNotifier - inside getUpdates
    12/21/2010 03:00:41 AAMUpdatesNotifier - Cannot find any update Node
    12/21/2010 03:00:41 AAMUpdatesNotifier - All updates count 0

  • I am trying to install Camera Raw 6.7 plug in to photoshop CS5 to be able to read my D800 NEF file but I get note "Unable to write at locate '/Users/ds/Library/Application Support/Adobe'. Please provide write permission to this location and try again. Wha

    Prior to this, I installed newest version of Adobe App Mgr as suggested by pop up note.

    What do I do to provide the write permission to the location?

  • How to udate camera raw plug in ifor  photoshop cs6  to ACR 7.3 stuck on 7.0

    I have a canon 6D and understand I need Adobe camera Raw 7.3 plug in to view Raw files. I have updated CS6 running on mac osx 10.6.8 but it wont update past ACR 7.0 Anybody got round this to view 6D raw files in CS6 on Mac running  10.6.8?
    Many thanks for any advice that you can give
    Best IB

    Since you have OSX 10.6.8, you can update as far as 8.3 and why not have the latest? Just to remind you, if you get a camera supported by versions 8.4 and later, you will have to update OSX to 10.7 or later.
    That said, here is the download.
    Mac :
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

  • Camera Raw Plug in 6.5 for PS5

    I am running OS 10 version 10.9.1 on my Mac. I have CS5 loaded with camera Raw 6.5 plug in (the most recent version).
    I bought a new Nikon model D610 and I am trying to transfer files using my PS dowloader.
    I just downloaded Camera Raw 6.5 the latest and greates version for PSCS5. Using the new Plug in I try dowloading a actual camera file. It dowloads to my computer but it fails to convert to a DNG file. It give me the following error message "Files succesfully copied but DNG conversion failed".
    When I try and open the file just dowloaded I get this error. "PS camera raw does not reconize the format you may need to update your version of camera raw plug in".
    When I try and open the dowloaded file with my PS I get the error message " Could not comple your request becaue the file appers to be from a camera model which is not supported by the installed version of Camera Raw".
    Now this is understandble, however, my model D610 is listed on the list of approved file formats for version Camera Raw 6.5.
    Can someone please help.

    Oscar72 wrote:
    my model D610 is listed on the list of approved file formats for version Camera Raw 6.5.
    No, it isn't. The D610 is a new model, first supported in ACR 8.3 (which is the current version for Photoshop CC / CS6).
    Also 6.5 isn't the latest for CS5, it went up to 6.7.
    You need the standalone DNG converter, version 8.3 for D610 support. The resulting DNGs can be opened in ACR 6.x.

  • Camera Raw Plug in 6.5

    I just bought a new Nikon D610 camera and I am shooting Camera Raw files. I am using PSCS5 with Camera Raw 6.5 plug in loaded. My question is I am unable to tranfer these files using my camera raw from my camera. I get no error message. My comuter just hangs up. Can Anyone offer any help

    More information and details are needed before anyone can help.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Plug in Camera RAW 8.4 is installed but is not werking in LR5 and CS5.

    I have installed the latest update  camera RAW plug in but it does not work. I am not able to open CR foto's from LR to PS.

    You’ve installed the Adobe Camera Raw 8.4 PLUG-IN for Photoshop.
    The term Camera Raw also refers to the version of internal programming, a coyp of which is included in the plug-in and in Lightroom, and in the DNG Converter, although each has its own copy.
    Updating the Photoshop ACR 8.4 plug-in that contains the CR engine 8.4 doesn’t change Lightroom 5.3 which contains the copy of the CR engine 8.3, still.
    What we’re waiting for is the next version of Lightroom to be released, likely called LR 5.4, which has its copy of the Camera Raw engine 8.4.
    The DNG Converter 8.4 beta has also been released and you can use it to create DNGs from your new camera’s raw files that will open in the older Lightroom, but I’d only do that experimentally, and not delete your original raws, in case something is changed by the time of the final release.

  • Can't open files in Camera Raw while in Bridge CS6

    05/30/2014
    Believe this issue/problem happened after automatic update from Adobe (but can't be sure).
    Have always uploaded files from camera into Bridge then do some editing by opening JPEG and RAW (NEF) files in Camera Raw from Bridge. 
    Now, "Open in Camera Raw" is greyed out and I am unable to find a way to open files with Camera Raw from inside Bridge CS6.  This seemed to happen suddenly and without any new software or applications being added to computer.  All other apps/software working well.
    Have tried various fixes found on Adobe community discussions without success.  Problem now ongoing for over a week +.
    Am able to open files in Photoshop with no problem but want to be able to do some quick edits using Camera Raw opening files from Bridge CS6. 
    I'm using Bridge CS6 Version 5.0.2.4.  (as part of Adobe Creative Suite 6).  Updater states I have most current version of Bridge installed. 
    I'm using an iMac computer with Intel Core i7 processor
    OS X 10.8.5
    Have found others with this same or very similar problems on forums but either can't understand patches/directions or unable to complete instructions on my computer.
    for example see:  Camera RAW update issue with Bridge CS6
    From that link/discussion, one finds this "solution": 
    After you update to Camera Raw 8.4, Bridge CS6 in Mac OS doesn't display image metadata or allow you to edit images in Camera Raw.
    To the top 
    Manually install the Camera Raw 8.4 plug-in.
    Exit Adobe Bridge.
    Download the file below.
    Locate and double-click the downloaded file to decompress it. The resulting file is Camera Raw.plugin.
    Navigate to the Macintosh HD folder.
    Open the Library/Application Support/Adobe/Plug-Ins/CS6/File Formats folder.
    IMPORTANT: Navigate to the root Library folder on your hard disk, not the Library folder under your user folder.
    Copy the Camera Raw.plugin from step 3 into the File Formats folder.
    IMPORTANT: This new file overwrites the file already in this folder. It's important that only one Camera Raw.plugin file is in this folder.
    Open Adobe Bridge.
    Camera Raw.plugin.zip
    Mac OS Camera Raw 8.4 plug-in for manual installation 
    However, when I try the above, I have these issues:
    1.  When I double click on the downloaded file, my computer opens PhotoShop and an error message is displayed that states "Could not complete your request because Photoshop does not recognize this type of file."  (I suspect this may mean my computer has automatically decompressed the file, but I am not certain of that).
    2.  Not completely certain I know how to "Navigate to the Macintosh HD folder" as suggested in step 4. above (OK, I'm new to Mac; long-time PC user….)
    3.  When I am in "Finder" and click on "GO" while holding down "Option" key, I find "Library".  within that, I can find "Library/Application Support/Adobe" but there is no "Plug-Ins" folder within the "Adobe" subfolder. 
    4.  Not sure how to tell if I am in the "root Library" on my hard disk vs. "Library under my user folder".  (Again, new to Mac….)
    I have NOT yet tried doing an "Uninstall" and then Re-installing the whole Adobe Creative Suite 6 and would like to avoid that if possible. 
    Would absolutely LOVE it if Adobe would simply push an update that would fix this problem or if someone would explain to me how I could restore the earlier version that worked perfectly for me. 
    Any help, suggestions (in very basic, simple terms that any idiot new to the world of Macintosh can understand) would be appreciated.  Very frustrated with Adobe at the moment. 
    Mostly have liked the switch to Mac, but with this and my photo workflow coming to a screeching halt, having second thoughts.  (But I suppose Adobe update for PC may cause problems as well.)
    Thanks in advance for any help/suggestions.

    05/30/2014
    Literally minutes after I posted the above, I figured this out myself and now I'm a happy camper and things are back to normal!
    Here was my error/issue:  as a new Mac user, I was not negotiating/finding files on my hard drive correctly. 
    In case there are others out there with this same issue (and as dense as I apparently am ):
    Here is what I did that resulted in a fix:
    First Steps:
    1. Quit/close Bridge
    2. As noted in post above, go to this link to download Camera Raw Plugin file:
      Camera RAW update issue with Bridge CS6
    Link to get to download is near end of instructions, but I will attempt to insert that link to download here:
    Camera Raw.plugin.zip
    3.  Once file has been downloaded, find it by using "Finder" Click on "Finder" and look on list of options on left side of Finder window to find "Downloads".  On my computer, when clicking on "Finder" these options appear in the list at the left:
    All My Files
    Airdrop
    Applications
    Desktop
    Documents
    Downloads
    Movies
    Music
    Pictures
    4.  Download you just did should be at or near the top of your downloads list and should be named as "Camera Raw.plugin"  and will be 83.5 MB in size
    5.  I right-clicked (two fingers on touchpad) to bring up drop down options and selected "Copy 'Camera Raw.plugin'" from that list to copy file.
    Now, you have copied the plug in that will fix this issue.  The second set of steps below will walk you through how to replace the file that is on your hard drive with this plug in file that you have copied.
    Second set of steps (and this is where, as a new Mac user, I was confused initially)
    1. Again, click on "Finder" on your Mac
    2.  On top of screen, find "GO" and click on that.  (You should see "Finder" in the upper right corner of your screen, then "File, Edit, View, GO, Window, Help"  Click on the GO
    3.  In drop down menu that appears, click on "Computer" 
    4.  Then, double click on "Macintosh HD" to open your hard drive
    5.  Next, double click on "Library" folder to open that.
    6.  Next, click on "Application Support" folder to open that.
    7.  Then, double click on "Adobe" folder to open that.
    8.  Then, double click  on "Plug Ins" folder to open that
    9.  Now, double click on "CS6" to open that folder.
    10.  Finally, double click on the "File Formats" folder that appears.
    11.  NOW, you should see this: 
    12.  Right click (two finger press if using a touch pad) to open window with options.  Select "Paste Item" by clicking on that option. 
    13.  You will be prompted with an option to keep existing file OR replace the file.  Choose "Replace" to past the new "Camera Raw.plugin" file to this folder. 
    Finally, if you now go back and open Bridge CS6, you should be good to go. 
    Hope that helps someone out there. 
    Hopefully future updates will from Adobe will be better. 

Maybe you are looking for