Camera Raw 5.5 will not install?  And Camera calibration button question.

I just built a new computer with 7 PRO and installed all my software. So when it comes time to instal 5.5 raw it goes about half way through and tells me to shut off Bridge.  As far as I know the bridge window and program are off and not running.  I even unpined it off the taskbar.
In CS4 when opening a Raw file and I go to my camera calibration botton there are only two options that come up, Arc 3.3 and 4.4. Where are all the other options at?  Do they come with the 5.5 update?  Thanks Keig

Keiger wrote:
As far as I know the bridge window and program are off and not running.  I even unpined it off the taskbar.
Odds are you've got Bridge set to auto-launch at startup...make sure it's not running when you try to install the update.,.and yes, the update should install the addition DNG Profile options.

Similar Messages

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

  • Camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700.

    camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700. Besides DNG Converter, what can I do to use files directly?

    Your next option is to upgrade photoshop. If you can't afford the full version (less than $20/month) you could get elements, it uses the latest version of camera raw, but I think it is a stripped down version though.

  • Camera Raw 6.5 will not install on PSE 9 for Mac OS

    Every time I try to install the Camera Raw update 6.5 into Elements 9 Editor, I get the messages "Some updates failed to install." and "Update is not applicable." The version of the Camera Raw Plug-in I have is "6.4.1.145" and will not work with my Panasonic Lumix DMC-FZ150. Any ideas?

       Install Camera Raw 6.5 plug-in for Photoshop Elements 9 or 10 and Adobe Premiere Elements 9 or 10 (manual installation on Mac OS or Windows)    
    Note: To successfully install the Camera Raw Plug-in for Photoshop Elements and Adobe Premiere Elements, follow all of the instructions below.
         Download the update installer utility (Windows: ElementsCameraRaw-6.5-mul-AdobeUpdate.zip or Mac: ElementsCameraRaw-6.5-mul-AdobeUpdate.dmg) using the following links.
    NOTE: Elements 9 and Elements 10 products use a different version of the Camera Raw 6.5 plug-in, select the link related to your version.
    Camera Raw 6.5 for Photoshop Elements 9 &and Adobe Premiere Elements 9  
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5264
    Mac OS: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5263
    Hope it helps. For more info check here http://helpx.adobe.com/photoshop/kb/install-camera-raw-6-5.html

  • CS6 Camera Raw 7.4 "will not open" compatible D800 NEF Raw files (Win7)

    CS6 camera raw 7.4 "will not open" the compatible D800 NEF Raw files (Win7). D300 NEF files open OK.
    I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I cannot find this article now.
    If the above is true, having PS version CS4 with update CS5 & 6 installed, would i have to remove all PS versions.
    Photoshop error message just states download latetest software version, which i have done with ACR 7.4. I have also tried ACR 8 which did open file either.
    Also when ACR8 is hosted by Photoshop CS6, it does not offer any of  the new features described in Photoshop CC marketing materials for ACR8 (Re: DPReview mag) so i returned to 7.4
    Adobe DNG runs OK but i would rather deal with the original file in ACR rather than adding an additional step with more files to keep track of.
    Is there a way of uninstalling all versions of ACR, cleaning system and re-installing ACR, assuming the fault lies with ACR?
    Anyone have any answers?
    Malc

    Half an hour after posting this query (in the wrong forum) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the memory card onto your hard drive and everything works fine.

  • Camera raw 7.4 will not open the D800 NEF Raw files. D300 NEF files open OK

    Camera raw 7.4  will not open the compatible D800 NEF Raw files (Win7). D300 NEF files open OK.
    I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I cannot find this article now.
    If the above is true, having PS version CS4 with update CS5 & 6 installed, would i have to remove all PS versions.
    Photoshop error message just states download latetest software version, which i have done with ACR 7.4 nd ACR 8 which did not open file either.
    Adobe DNG runs OK but i would rather deal with the original file in ACR rather than adding an additional step with more files to keep track of.
    Is there a way of uninstalling all versions of ACR, cleaning system and re-installing ACR, assuming the fault lies with ACR?
    Anyone have any answers?
    Malc
    ANWER:-
    (Appologies for spelling errors but my keyboar hs just packed up). Now on  screen keyboard.
    Half an hour after posting this query (In the wrong forum -  Downloading, Installing, Setting Up) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the cameras memory card onto your hard drive and everything works fine.
    Nikon Transfer has now been assigned to the dust bin!

    Half an hour after posting this query (in the wrong forum) I resolved the issue. The fault lies with Nikon Transfer.
    Nikon Transfer corrupts the D800 NEF files. Apparently Nikon Transfer is well known for causing errors.
    Drag & dropping the files direct from the memory card onto your hard drive and everything works fine.

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • I have installed latest update for itunes but it will not install and I receive a message Apple Mobile device failed to start. I have uninstalled and reinstalled itunes but have the same problem. I am using windows 7 and internet explorer

    I have downloaded the latest Itunes update, but it will not install and I receive a message 'apple mobile device failed to start'. I have uninstalled and reinstalled itunes but still have the same problem!

    Hi there willjay3976,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W. 

  • After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

    After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
    == This happened ==
    Every time Firefox opened
    == Upgrading to newer Firefox version (3.6.8)

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • Flash player will not install and shockwave is enabled, what do I do?

    Flash player will not install and shockwave is enabled what do I do.

    You start by posting your operating system and browser here in a reply.
    That way we know where to begin.

  • Adobe camera raw 8.5 is not installing.

    I,m using Adobe photoshop CC 14.2.1 on my windows 7 PC. This photoshop has camera raw 8.0 while there is a update version(8.5) of camera raw is available. So I'v downloaded camera raw 8.5 and trying to install it but it is not installing and "showing update could not be applied". So please help me that i can use camera raw 8.5. Thank you.

    had the same Problem 3 weeks ago , I called the Adobe Servicedesk , and the Adobe guy gave me a direct link to the Camera Raw 8.5 download.
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/setup.zip
    worked for me.

  • Adobe flash player update will not install and Ican not run and video on computer from internet expl

    Internet explorer asks to upgrade flashplayer and it will not install,now I have no streaming video .

    What exactly do you mean "will not install"; do you get an error message?
    Check also
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • I have upgraded to a new computer and Windows 8.  I cannot install Photoshop 6 which was an upgrade version from Windows 5.5, 5, 5.  The original 5 will not install and without it, the Photoshop 6 has no original version to load from.

    How do I install Photoshop 6 on Windows 8., when my original Windows 5 will not install?

    If you were actually talking about CS5.5 and an upgrade to CS6, you only need the serial numbers from both products.  Adobe's installer will look for CS5.5 on your system and when it doesn't find it, you will be prompted to enter that qualifying product's serial number.
    Nancy O.

  • Office 7 security updates will not install and can not uninstall Office 7

    I am running Office 7 in Windows 7 Home Premium.  I have three security updates that will not install.  I tried to uninstall Office, but the uninstall program stops and says it can not continue.  I have tried putting the Office 7 DVD in
    the computer and reinstall Office 7, but install will not run.  I have been working on this for two months.

    Hi,
    When referring office 7 do you mean office 2007?
    For update issue, windowsupdate.log will give us some clue.
    But I think the file is corrupt since you cannot uninstall or reinstall it. Kb 928218 may help us here:
    How to uninstall or remove Microsoft Office 2007 suites
    http://support.microsoft.com/Kb/928218
    Actually, for office issue, post in office forum could be better:
    http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
    Hope this helps.

  • I deactivated photoshop CS4 so I could reinstall on windows 8.1.  Now it will not install and errors

    I deactivated photoshop CS4 (one of many times) to reinstall on windows 8.1.  It errors with a message that it could not install and advised I contact support.  I also tried to install on my laptop with the same results.

    use compatibility mode to install.

Maybe you are looking for