Camera Raw 6.2 on Lr3.2 download page

If Cs5 is NOT installed is this Camera Raw 6.2 not expected to be installed?
After extracting the Camera Raw zip file a folder 'payloads', meta.inf and Adobe Patch Installer.exe resulted. Clicking on the Patch installer resulted in a pop up message
'Adobe Applicatiion Manager needed- its missing or damaged....download a copy of Adobe Application Manager or install the product again'
The dng converter installed and the missing Canon 100mm lens is now listed in the Lightroom 3.2 lens panel. Lr 3.2 rc installed on Win7 64bit 8Gram 4core and is running smoothly.
Rose

Lightroom does not use the Camera Raw plug-in.  Since the DNG converter is an independent standalone program, it can be used to create DNG files completely independently from Lightroom or Photoshop.

Similar Messages

  • How do I install a Camera Raw update once it has downloaded?

    I have downloaded the Camera Raw 6.7.1 update and I don't know how to actually install it now. The Adobe Application Manager stated that the application has been successfully updated and are ready for use. Where do I now find the file to install the update?

    It should be installed already looking at your screen grab.  Go Photoshop > Help > About plugins > Camera RAW to see what version you have.
    But updates did not always work well with CS5, so you might need to download the file maually, and place it in the right location.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5602
    This list has file locations for CS5, but I can't see Camera RAW for the Mac in the list
    http://helpx.adobe.com/photoshop/kb/preference-file-functions-names-locations.html
    But this should tell you
    http://www.adobe.com/special/photoshop/camera_raw/Camera_Raw_6.7_ReadMe.pdf

  • Camera RAW not appearing in Photo Downloader

    Hello,
    Since moving to a new PC (from Windows XP to Windows Vista 32-bit), the Elements Photo Downloader never shows the RAW files just .jpg files.
    I'll try and describe my setup in detail:
    Windows Vista 32-bit
    Photoshop Elements 5.0 (applied the 5.0.2 update)
    Camera RAW plug-in 4.4.1 (tried with 4.3.1 also, no luck)
    Camera is Canon 400D, Firmware v 1.0.4
    The only difference between when I had it working under XP is a firmware update to my camera. Could this have caused the problem? If so, which version of Camera RAW should I use?
    Many Thanks.

    Don't try to download directly from the camera...use a card reader. Your firmware update prolly broke XP's ability to see the camera as a disk instead of a device.

  • How can I download Camera RAW on my PC without downloading DNG converter

    I use a Nikon D7000 and a Nikon D3s and have CS5.  I had camera raw working correctly before but had to clear my computer and start again.

    Did you try Help>Updates from within photoshop cs5 to get the camera raw 6.7 camera raw plugin?
    If that doesn't work, try the camera raw 6.7 updater from here:
    Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

  • After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

    After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

    You should install Camera Raw 4.6.
    Visit this page and follow the instructions carefully:
    PC:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Mac:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
    -Noel

  • How do I install Camera Raw update aget downloading for Photoshop CS6 Ext on Windows 7 64bit

    How do I install Camera Raw update 6.7 after downloading for Photoshop 6 Ext 64 bit
    on Windows 7?

    Camera 6 and its update are for Photoshop CS5 , for Photoshop CS6 we have camera raw 7.

  • Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?

    I have Photoshop Elements 9 and use a Nikon D5100.  I have downloaded camera raw 6.5 but cannot download photos to it.  Does camera raw start automatically or do I have to manual start it?

    That did I, thanks.
    99jon <[email protected]> wrote:
    99jon  created the discussion
    "Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?"
    To view the discussion, visit: https://forums.adobe.com/message/7178756#7178756
    >

  • I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download  said it was sucessful but I still can not import photos.

    I downloaded the newest version of camera raw for LR. I have LR4 and can not import photos from my new Nikon D750. The download  said it was sucessful but I still can not import photos.

    Lightroom doesn't use the Camera Raw plug-in. So downloading the latest Camera Raw didn't do anything at all for you. The only way to update or upgrade Lightroom is to obtain the latest version. If you have Lightroom 4 then the last version of Lightroom you can have at no additional cost is Lightroom 4.4.1. If the camera you are using requires anything newer than what is supported and that version of Lightroom then it will require an upgrade to Lightroom 5.

  • How do I download the latest version of adobe camera raw? [was:allen rokach]

    How do I download the latest version of adobe camera raw?

    Here are direct download links:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

  • Unable to install Elements Update Camera Raw 6.6

    Due to error code: U44M2P7, I am unable to install Camera Raw 6.6 update for Elements 10.

    Please try applying the update directly from the Camera RAW section of our Product update page at http://www.adobe.com/downloads/updates/.  If you continue to have difficulties then please review the install logs for the update to locate the cause of your difficulties.  You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Camera Raw 6.7 Update for Mac OS 10.10:  Installation Failed error message.

    Camera Raw 6.7 Update for Mac:  Installation Failed error message.  Update downloaded directly from Adobe website.  Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished.  Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • Adobe Bridge CS4 Not converting camera raw files right?

    I run an HP computer with Windows Vista 64 bit and have CS4. We also have a Canon 40D camera and shoot in camera raw format. When I download the images Bridge converts them into usable images. The last two times I've downloaded images, after converting them, Bridge showed a few of them as either not readable at all or with large chunks of the image whitened out. My husband shoots college football games and takes anywhere from 300 to 600 pictures at each game. October 14th was the first time we had problems, 5 or 6 shots out of 250 were showing up as corrupted. This last weekend there were 15 out of 307 images corrupted. Thinking that the card is going bad or we have a problem with the camera, we purchased a card rescue program Sandisk recommends to see if we could recover any of the images. It shows that all 307 images are on the card and in good condition. But, when I ran the recovered file through Bridge there were 31 images that are showing up as corrupted. I'm beginning to think there might be a problem in the conversion process and that it is getting worse each time it runs. Is this possible and if so, what can I do to correct it?
    Thanks for any help,
    Linda

    Thanks Curt for the quick reply.
    After a very stressful afternoon it appears that the card recovery program I downloaded just accesses the thumbnails on the card when it previews them, not the actual images. It would have been nice if they told me that before I forked out the money for it, but.... So although it was telling me they were there, they were not. It wasn't until I viewed the files in Bridge that the corrupt images were showing up. It is also showing more corrupt images than actually are. When I view the card in Bridge I'm still seeing the original corrupt images. We are leaning toward a bad battery grip with our camera. He is going to shoot without it the next time he does a game and see if we still have the problem.
    Thanks again for your reply.

  • Can't Open .NEF Files In Camera Raw CS3 - Windows 7

    I have a Nikon D60, Windows 7 Professional (32bit) and  Web Premium CS3. 
    I recently upgraded from XP to Windows 7.
    I cannot get my Nikon's .NEF (Camera Raw) files to open when I select "Open in Camera Raw". I can see the .NEF thumbnails, but neither Photoshop or Bridge will open the files in Raw, you know where you can adjust all those killer settings non destructively.
    I had cs3 installed on an XP machine and my .NEF files worked perfectly in Raw.  Not so in Windows 7. I have tried to update to Camera Raw 5.6 but that wouldn't install. Is there an earlier version of CR that I can get and use, or any other advice would help.
    Thanks

    The last version of Camera Raw to work in Photoshop CS3 is version 4.6. If you HAD been able to open your D60 NEF files and now can not, then something changed...did you do a fresh install of CS3 under Win 7? If so you installed version 4.0 (what shipped with CS3). You'll need to go to the Camera Raw Updates for Windows and download an install version 4.6.

  • PSE 8 not  opening CR2 after 6.2 camera raw update

    I'm Running a MAC OSX 10.6.2 -
    History of products.
    PSE8  with CR 5.7 worked. 
    Lightroom 2.7 worked
    Updated PSE 8 CR to 6.1 and PSE stopped opening with disk error message.
            Lightroom still worked and Bridge was opening files.
    Upgraded Lightroom to vs 3.
    Upgraded CR 6.2 and lightroom works while PSE and Bridge fails to open raw images with message of
    "can not complete your request due to a disk error."
    Preview application opens and displays the raw images.
    How I installed -
    I removed cameraraw plugin from  /PSE8 /file format/   folder. Installed the 6.2 Package from the DMG file and copied the plugin to the file format folder.
    Restarted PSE - failed to open ,, restarted the machine the same.
    What did I do Wrong?

    t2go,
    Below is the list of steps from the Adobe KB article for installing the Adobe Camera Raw plug-in 6.2 on PSE 8:
    Link to the KB article: http://kb2.adobe.com/cps/863/cpsid_86312.html#main_Install Camera Raw 6.1 for Photoshop Elements 8 on Mac OS
    #Install Camera Raw 6.2 plug-in for Photoshop Elements 8 on Mac OS
    Close Photoshop Elements 8 and Bridge CS5.
    Download Camera Raw_6_2.dmg from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4809. Opening the downloaded file mounts the disc image containing the following two files:  Camera Raw.plug-in and cameraprofiles.mpkg.
    Put the new version of the Camera Raw.8bi file that was downloaded into the same location as the original version.
    Navigate to the root of the local disk (not your home folder).
    Navigate to the following location: Applications/PSE8/Plug-Ins/File Formats.
    Move the original plug-in from the location listed in step 5 to a backup location (for example, a new folder on your desktop). Ensure that you keep this version in case you want to revert.
    Copy the downloaded copy of the Camera Raw plug-in into the installation location listed under step 6.
    Launch Photoshop Elements 8 or Adobe Bridge CS5.
    To install Camera Profiles, double-click CameraProfiles.mpkg and then follow the on-screen instructions
    Are you following the steps as mentioned above?

  • Outdated Camera Raw plug-in for CS5 Extended

    As a long time user of ADOBE products, (Flash, Reader, Acrobat, Photodeluxe, and photoshop)  I was first introduced to PHOTODELUXE2 that came with a scanner. Got to like it, then over the years, I've had the opportunity to try out other PS titles like PS7, and the last version I have is the PS CS5 Extended, which I bought at a garage sale a few years ago.  Are these Photoshop programs only for the RICH AND FAMOUS?
      I have cancer, and I am on disability, so for obvious reasons, and financially, I can not afford the $700.00 plus price tag for photoshop full licensed program. I have tried to open RAW photos from my Canon G6 Digital camera, but the plug-in needs to be updated. I also have a newer Canon SX50, that does have a RAW plug in, but that only works with this cameras photos, not my old CRW Images.
    The G6 Raw plug-in was a 32-bit, that came with the Install Canon disc, but since changing my 32-bit OS to a WIN 7 64-bit, that plug-in no longer works, unless I get a hold of another XP 32Bit computer, and install it on that, which I do not wish to do,
    Is there a third party Camera raw plugin that might open these G6 RAW files?  or do I have to buy the expensive full licensed program, which I can not afford? I have taken a photoshop Class at a local School, and received a 'Certificate of Completion", but as a student, I did not know at that time, that I could have got a discouted price for being a student, and looking back, it was still too expensive for me anyway, even at that price.
    Since being diagnosed with cancer, I find myself at home all the time and enjoy editing photos for my self and family, I do not use this PS software for any financial gain, just self enjoyment, which takes my thoughts of having cancer away whenever I dabble.
    I certainy appreciate the work that the Adobe developers go through, and I certainly do not want to take away from their livlihood buy using a product I bought for $15.00 for at a garage sale last year. But the CS6 Standard costs $700.00, or the CS6 Extended, at $1,000, what are my options?..I haven't won the lottery just yet.
    i guess I'm looking for a Camera raw Plug-in to be able to open older CRW RAW Images. OR find a licensed PD CS5 Extended at a nominal price. Thank you for any help!  Sincerely, Jim

    I think the G6 should be supported by camera raw in PS CS5.  You can download camera raw 6.7.1 -- the latest camera raw plugin for PS CS5 -- from  http://www.adobe.com/downloads/updates.html
    Scroll down to Camera Raw, click on Windows then download the 6.7.1 update.  Direct link:  http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
    PS CS5 usually installs both a 64-bit version and a 32-bit version on 64-bit systems.  You might look in your Win 7 program listing (Start key, then All Programs) where you should see both Adobe Photoshop CS5 and Adobe Photoshop CS5 (64-bit).  Your older 32-bit plugin that you used before might work with the 32-bit version of PS CS5.  Plugin would need to be installed in the 32-bit version only -- in C:\Program Files (x86).

Maybe you are looking for