Camera raw 7-2 refuses to install into Photoshop CS6

trying to install camera raw 7-2 beta release into Photoshop CS6 on MacBook Pro, OSX 10.8.1.  Installation commences, then I get Error Code: U44M2P15. I have tried new downloads of camera raw, restarting the Mac to no avail. Any ideas???   I need this release to view Sony ARW files generated by the new Sony DMC RX100 camera. Thanks for any assistance!

Thanks for your assistance Jeff. I wish it was so simple.  I ended up on the Adobe customer chat where some very kind techs helped me out. The issue was ultimately resolved by reinstalling CS6.
This was way more complicated than it sounds!  I ran the photoshop 6 uninstaller, which encountered an error. Following the online error advice, I then installed the Adobe cleaner and run it a couple of times, with restarts. There were still Photoshop 6 files sitting in the Utilities folder. I dragged these to trash manually. Photoshop 6 would not install, giving an error message about halfway through.  After nearly 2 hours of  tech chat and multiple interventions, the Mac was started in SAFE mode and permissions repaired, photoshop reinstalled from original CD, then upgraded.
Camera raw 7.2 was then installed successfully,  and now my Sony Rx100 ARW photo are brightly displayed in Bridge.
I hope this helps anyone else out there who experiences similar problems. Another  installation of camera raw 7.2 on different  mac (OS10.8.1) running Photoshop 6 was event-free. 

Similar Messages

  • Why don't changes made in camera raw with the adjustment brush carry into photoshop?

    Why don't changes made in camera raw with the adjustment brush carry into photoshop?

    Using the Open button in ACR to get to PS doesn’t create a PSD or a TIF, it just transfers the image in memory. 
    As has been asked, already, what are the precise steps of your workflow starting with your painting the adjustment brush strokes in ACR and seeing the image in PS without the strokes, and what exact versions of PS and ACR are you using? 
    Use Help / About Photoshop..., and Help / About Plug-ins... / Camera Raw...

  • FAQ: What cameras are supported in ACR 7.0 with Photoshop CS6?

    See this link for full details on camera support in Camera Raw versions:
    http://blogs.adobe.com/lightroomjournal/2012/03/raw-support-in-lightroom-and-camera-raw.ht ml
    Snip taken from link above:
    You’ll also note that ACR7, available with Photoshop CS6 beta, is lagging the most in updated camera support.  This is based on when we lock down or “bake” the code for each release.   Even though ACR7 was only released last week it was “baked” before Lightroom 4.0 and Camera Raw 6.7.  Similarly, Lightroom 4.0 was finalized before Camera Raw 6.7.  We’ll get Lightroom and Camera Raw in sync soon but in the interim, here’s the latest incremental support list for each product, relative to Camera Raw 6.6 and Lightroom 3.6:
    Photoshop CS6 beta with ACR7
    Canon PowerShot S100V
    Fuji FinePix X-S1
    NOTE:
    ACR7.1 will have the superset of all currently supported cameras in ACR6.7 and LR4.1 plus a few extras.

    I was just curious and hunting around ACR 7.1 and Photoshop trying our the features. Also I have found that LR4 RC2 has follows ACR 7.1 as far as lens profiles go working with RAW images, so there is some consistency.
    Wonder what the difference is between a RAW rendered image in ACR versus a Photoshop rendered image. Given, I could be wrong here, that Lens Correction is based on the optics of the lens, focal length, and the characteristics of the sensor, so would they not be the same in ACR and Photoshop? 
    I think I need to go check out a lens profiler
    Cheers
    Mike
    There is one reason that I may go back into the Lens Correction Filter and that might be to fine tune some of the persective tools. With a large panorama much easier to see what needs to be done rather than view seperate images, and i have done that in the past. did not come to me until after I had hit the Send Button

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

  • Camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700.

    camera raw 7.2 will not install within CS5.5, but need it to read nrw files from P7700. Besides DNG Converter, what can I do to use files directly?

    Your next option is to upgrade photoshop. If you can't afford the full version (less than $20/month) you could get elements, it uses the latest version of camera raw, but I think it is a stripped down version though.

  • Adobe Camera Raw 7.4 is now available for Photoshop Elements 11

    Adobe Camera Raw (ACR) 7.4 is now available to download for Photoshop Elements 11. More information regarding the additonal camera support added can be found at link here. For updating your camera raw plug-in in Photoshop Elements 11 follow the steps mentioned in blog post: http://blogs.adobe.com/pselements/adobe-camera-raw-7-4-is-now-available-for-photoshop-elem ents-11/

    Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.4
    Mac download click here DNG Converter 7.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

    I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • Problem reading dng files into Photoshop CS6

    Why can't I read dng files from a canon 5dmk2 from ACR8.1 into Photoshop cs6?

    I converted the CR2 files from the Canon5dmk2 into dng using the Adobe DNG converter.
    In Photoshop CS3 I can read these dng files into Adobe Camera Raw and then export them into Photoshop. No problem.
    I have just installed Photoshop CS6. I can read the dng files into Adobe Camera Raw (v8.1) without a problem. However the file is then corrupted when I try to export it into CS6.
    Strangely, I have similar files converted from CR2 to DNG for a Canon 1100D and these read without problem via ACR into both Photoshop CS3 and CS6.
    The problem is that Photoshop CS6 will not read dng files from a Canon 5dmk2.

  • How can I open multiple files as Photoshop Raw files at the same time for Photoshop CS6 extended on a PC?

    I am trying to open 20-25 files at the same time as Photoshop Raw [*.RAW] files.
    The only way I can open multiple files is if i leave the file type as All Formats. When I change it to  Photoshop Raw [*.RAW], the files a deselected.

    Use bridge. Select all the files then press ctrl-r or cmd-r to load the selected files into camera raw.
    If you try this in Photoshop use File>Open As then for file type choose camera raw. (I have not tested open as for opening multiple files)

  • Images in Bridge have suddenly become much brighter than when I call them into Photoshop CS6.

    Images in Bridge have suddenly become much brighter then when I call them into Photoshop CS6. My monitor is calbrated.

    First go the Bridge / Camera Raw preferences.
    Inhere under 'default image settings' are 4 options to put a checkmark in front.
    If there is a checkmark in front of "apply auto tone adjustments' deselect it and try again.
    Otherwise select one problem file and with right mouse click menu choose 'purge cache for selection'. If this works then go to menu tools / cache/ purge cache for folder.
    If still in trouble could you provide more details about versions and OS and preferable a screenshot to clarify the problem more?

  • Cannot copy and paste text into Photoshop CS6

    I am not able to copy and paste text from non-Adobe programs (like Keynote or Word) into Photoshop CS6. I get an error message reading "Could not complete the Paste Text command because the clipboard data is empty or invalid." I have tried shutting down Photoshop, shutting down other programs, re-starting my computer, adjusting my Preferences and asking Adobe for help by phone and chat. I am on a new iMac and have no third party plug-ins installed. Can anyone help?

    Yesterday i update Yosemite and Adobe Photoshop CS6
    i found error text message like you everytime when i used fontAwesome on Adobe Photoshop CS6 and then i found out to fix this problems Yeahh…
    Try My Way to fix it out
    -> copy The Text you want to use
    -> paste your text (from your clipboard) To App TextEdit
    -> then Copy again
    -> back to Photoshop paste it on your document layout
    -> Done

  • Import MPEG-2 video into PhotoShop CS6

    Does anyone know why I can not import MPEG-2 video file into PH CS 6?

    Hi there -
    Do you have any other Adobe programs installed? Photoshop CS6 can only open MPEG-2 video files if a decoder is installed, such as Premiere Pro or After Effects.
    See this Adobe Help article for more information about supported files types in Photoshop CS6: http://helpx.adobe.com/photoshop/using/supported-file-formats-photoshop-cs6.html
    EDIT: Here is an extremeley technical post about this issue - http://forums.adobe.com/message/4700873
    If you have further issues with this topic, please post in the general Photoshop forum where experts will be able to give you much more specialized help.

  • Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

    I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

    Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

  • Installing adobe photoshop cs6

    Im trying to install adobe photoshop cs6 and it says my serial number is invalid

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

Maybe you are looking for

  • Error while testing Data Service

    Hi Experts,                I got error while testing the Data service of <b>Salesorder Createfromdat2</b>, in this when iam entering the Doc_Type as ZORD it is showing " This Doc type is not defined, what to do with this. Where as when i tried with W

  • How to hide mail photo browser

    Friends, When using the photo browser to attach images to mail messages, I've found that the only way to hide the browser is to close it.  Is there any way to make it behave like every other window, which is to move back in the stack when I click on

  • Number keys not working

    The numbers in the pad to the right of my keyboard suddenly stopped working. The surrounding characters still work. Additionally, if I use the zero, my computer freezes. Any ideas? Thanks

  • IWeb 08 crashes continually

    I imported my simple iWeb 06 site into my iWeb 08 program, and every time I try to publish it, iWeb 08 crashes unexpectedly. Here's my iMac info... (minus the serial number, I don't think you need that). What should I do to stop iWeb 08 from crashing

  • Bought a Powerbook G4 1.25ghz 15" computer off eBay

    Hello, I have a quick question about this specific model. As far as I am aware, most, if not all (correct me if im wrong) Powerbooks G4 have the AC Adapter on the left side and the power button on the right side, but I bought a 1.25ghz version that h