Camera Raw 7.3 Update replaced Photoshop CS6 Standard with CS6 Extended Trial version

How do I get back to Photoshop CS6 Standard edition after Camera Raw 7.3 update?
After installing the Camera Raw update photoshop now runs as the Trial version of Photoshop Extended.

I upgraded CS6 and Lightroom 4 today and then when restarting Photoshop CS6 this evening I get a dialog about registering with my e-mail for Photoshop Extended Edition Trial.
I have never owned the Extended edition and did the update from my existing product using the Adobe Update manager. There should have been no reason for this mistake to occur.
I've done upgrades like this many, many times before and have never had my system react this way. You clearly have a bug in your update process and should fix it pronto. Do you know how confusing it is to get a dialog like this? Should I let it register me for a product I don't own? Is that going to somehow trash my legitimate license (now there's the process of activation, I'm always concerned that I'll mess things up and end up unable to use Photoshop until support can help me out)
I'll go find my serial number and re-enter it, but I think this is a serious bug - and will make me much more cautious about waiting to apply updates until I've read the forums to make sure it's safe to do so

Similar Messages

  • Camera Raw 6.6 update for Elements 10 fails with Error Code U44M2P7

    I've downloaded the updater twice now and tried to install.
    I keep getting this same error code.
    Anyone know what the problem is?

    Jeff,
    I'm sailing against a headwind here. I followed the link that you gave me (Troubleshoot install using logs | Elements) and immediately ran into trouble.
    The Adobe Support Advisor the page recommended is no longer available or supported
    The folder on my HD that it pointed to, //Library/Logs/Adobe/Installers/, does not exist on my computer. There are a couple of other folders in the //Library/Logs/Adobe/ directory, but they are both empty.
    I searched through the PDApp.log and did not find the two errors that the web page recommended.
    So right now I'm stymied.
    But I did figure a hack to make this work.
    I open the .RAF files with a hex editor and replace every instance of "X30" with "X20"
    The file will now open in Photoshop CC
    Run it through the Adobe DNG Converter.
    Then I can open the .DNG file in Elements 10.
    Hopefully Adobe will jump on this soon. The only differences in the .RAF file that the Fuji X30 produces is the string "X30" in about five places in a 20MB file. Other than that it is identical to the .RAF produced by the X20.

  • Error installing Camera Raw 7.2 Update

    I am trying to install the Camera Raw 7.2 Update for Photoshop CS6. When I try to install I get this error message:
    Photoshop Camera Raw 7.2
    There was an error installing this update. Please quit and try again later. Error Code: U44M2I218
    I have rebooted and tried again, but I got the same error. I downloaded the update manually, since it isn't available in the Application Manager.

    Please review the installation log for the update being applied.  You can find instructions on how to review the installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Camera Raw 6.7 Update for Mac OS 10.10:  Installation Failed error message.

    Camera Raw 6.7 Update for Mac:  Installation Failed error message.  Update downloaded directly from Adobe website.  Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished.  Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • When i try to update RAW i get this error message Photoshop Camera Raw 6.7 Update Installation failed. Error Code: U44M1P7  ?

    When I try to update camera raw files in CS6   I get the following error message
    Photoshop Camera Raw 6.7 Update
    Installation failed. Error Code: U44M1P7
    What do I do?

    Which version of photoshop and operating system are you using?
    The reason i ask, even though you wrote cs6, is the camera raw 6.7 update is for photoshop cs5.
    Did you try Help>Updates from within photoshop to get the most recent version of camera raw, which is 8.7 for photoshop cs6?

  • Photoshop Camera Raw 7.4 Update  is not installing because of Error Code U43M1D207. What needs to be done to resolve this error code issue?

    Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207.  What needs to be done to resolve this issue?

    If you need to post again, please keept the following in mind:
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Camera Raw 8.7 update fail in CS6

    The Camera Raw 8.7 update download fails in Photoshop CS6. I read a post elsewhere from someone with this same problem who said he was told to uninstall/reinstall Photoshop. Surely that cannot be the answer, and many people must be having trouble with this download. Please help! I cannot edit Lightroom 5 files in Photoshop CS6 now (I did download the update to LR5 with no problem).
    FWIW the error message was:
    Photoshop Camera Raw 8.7(CS6)
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

    Please try this: Re: error code U43M1D207
    I actually didn't know what this meant.
    So I highlighted the error in my browser (Firefox) and did a Google search, which handily catches all the Adobe forum references as well as possible solutions outside of Adobe. Make a note of it, it's a great time-saver.
    Gene
    (If anyone's answer does solve your issue, please mark it "correct" to close the case.)

  • Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

    Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    Camera Raw plug-in | Supported cameras

  • Adobe Photoshop Elements 9.0.3 Update   There was an error downloading this update. Please quit and try again later.     Photoshop Camera Raw 6.5 Update   There was an error downloading this update. Please quit and try again later.

    Adobe Photoshop Elements 9.0.3 Update
      There was an error downloading this update. Please quit and try again later.
      Photoshop Camera Raw 6.5 Update
      There was an error downloading this update. Please quit and try again later.

    Hi,
    Which operating system are you running on?
    For PSE 9, the update process was best using a manual method.
    Are you trying to do Help - Updates?
    If so try these downloads (fand follow the manual instructions given on the pages.
    Adobe - Photoshop Elements : For Windows : Adobe Photoshop Elements 9.0.3 update
    Adobe - Photoshop Elements : For Windows : Camera Raw 6.5 update for Elements 9
    Adobe - Photoshop Elements : For Macintosh : Adobe Photoshop Elements 9.0.3 update
    Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.5 update for Elements 9
    If you are getting an error during the download please try a different browser.
    Brian

  • Camera Raw in CS4.  I have applied the Camera Raw 5.7 update to my CS4 Photoshop. It works fine in Photoshop, but only shows the NEF icon from my DS3 files in Bridge. Any ideas would be gratefully received.  Many thanks.

    I have installed Photoshop CS4 on a new PC as my other has all but died.  I applied the Camera Raw 5.7 update for CS4 to take care of the NEF files from my Nikon D3S.  This works fine when opening NEF file, but in Bridge it only shows the NEF icon.
    If anyone has any ideas, I would be most grateful.

    Purge the cache for the offending folder(s) through the Tools menu in Bridge.

  • Camera raw is NOT there in photoshop CS 6 update from CS 5

    I have just upgraded from photoshop CS5 to photoshop CS 6 and there is no camera raw plugin in CS 6.  its not there at all.   I can't update it because it isn't there..."could not complete the Camera Raw command because Adobe Camera Raw plugin cannot be found." I have installed the Photoshop CS 6 update 3 times to no avail. Camera raw will not update because there is no plugin to update. I am running Mountain Lion. 10.8.2

    Please try below troubleshooting steps to resolve the issue:
    If you are using Mac operating system try following steps:
    Give read and write permissions to Application support folders from both the library's
    Then re-install Photoshop CS 6.
    Issue reason, lack of permissions to concern folders from your Library hence Photoshop is not able to access the camera raw or not able to install camera raw successfully.
    above provided steps are the only resolution for this issue.
    Regard's
    Vijay.
    birgit 1 wrote:
    Thanks, that is interesting and something I had not previously noted.  If I import RAW files to CR direct from a folder, it is still a NEF.  But Aperture changes all NEF's to TIFFs.  OTOH, at least I once again have my CR opening in PS.

  • Photoshop camera raw 6.7 update failed

    Hi there
    I have a problum.  I'm showing a photoshop camera raw 6.7 update and it will not install. I have tried to download the update direct but when I download it my OS dont know what to use to install it.  Can someone advise as I am using Windows 7 64bit and Design Premium CS5
    Thanks for your help

    When I open PS5, I get this message "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."  I can't uninstall to reinstall also. At present I can't use my PS5.

  • Photoshop Camera Raw 6.7-Update Installation failed

    Photoshop Camera Raw 6.7-Update Installation failes.
    System information:
    Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x32
    Operating system: Windows XP 32-Bit
    Version: 5.1 Service Pack 3
    Regional setting = de
    Camera Raw 6.7.1
    Adobe Support Advisor (V1.6.1.20120504) is not able to locate the problem.
    How can I successfully install the Camera Update?
    Best regards,
    Hans-J

    When I open PS5, I get this message "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."  I can't uninstall to reinstall also. At present I can't use my PS5.

  • Photoshop Camera Raw 6.2 Update Installation failed (MAC)

    If you get the following error when updating ACR 6.2 on OSX:
    "Photoshop Camera Raw 6.2 Update   Installation failed"
    Look for /Applications/Adobe
    If it is a FILE instead of a folder then delete it.
    Rerun the update.

    Just a heads up.

  • HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

Maybe you are looking for

  • I couldnt get online with my wifi on safari doesnt let any website to open

    hey guys pls help i couldnt get onlin on my mc safari n firefox not working though wifi says m connected???? n do u guys know how to reboot the mac n not loose any data

  • PO value differnt from Invoice Value

    Hi, Help me in following senario I have PO for a QTY of 100 with $2 as unit price. Therefore the PO value is $200. I do a total Goods receive for the 100 QTY against the PO. Now my 100 goods are lying at my stores, ready for production. Sometimes lat

  • Can the specific changes/updates made to a customer be captured with the detail of changes?

    One of our 11i Customer placed the below requirement: We are creating a report that will extract customers that have changed or updated in Oracle. The user requested to include also the specific change made to the customer. Is there a way that we can

  • How to get Accounting documents based on Billing documents

    Experts, I have a particular requirement in SD. I need to fetch the details of Accounting documents(BKPF-BELNR) and Fiscal year(BKPF-GJAHR) based on the Billing documents(VBRK-VBELN). Is there any function module to do so or any other way. Currently

  • RPD Security and Migrations

    We have a Subject Area where up to 25 columns in the Presentation Layer have security applied. They are denied to the System-level Everyone group and access is provided to Group1. The way our migrations to the environments work is the Developer provi