Camera RAW 8.3 For CS6

Update Manager popped up - told me there was an Update for ACR 8.3 for both Photoshop CS6 and Premier Elements 12
Dutifully started the update - then Application Manager crashed - no matter what I do I get the error U43M1U49 so want to try a manual download
So where can I find the ACR update. Went to the update page and it shows the DNG update - but nothing for ACR.
Thanks
Mike

Ashutosh, hesitantly I followed your advice and updated AAM from the link you provided. Went into Photoshop and went to Help Update and AAM crashed again. But update you recommended added a shortcut to my desktop. So I fired that up and got the CC version of AAM. So clearly this did not update but installed another version of AAM - so now I have two!!!!!
Pressing forward I fired up the CC version and it showed a whole bunch of applications I can download as a trial, but also CC versions I can update, like Bridge CC - which could be very confusing for folks!! I then clicked on the update link in CC AAM and it showed me the updates for ACR 8.3 and the extensions update - ran the updater and it worked and I now have ACR 8.3 working. Great!!!
But I am concerned that I have the ability to install Bridge CC, Edge Code CC, Edge Inspect CC, Edge Reflow CC, Exchange Panel, Extend Toolkit CC and Extension Manager CC
I am not going to attempt to install as I am very concerned about running a mixed envrionment - so is this intended behavior for the AAM update?
Mike

Similar Messages

May i know if camera raw will update for cs6?

Hi
may i know if camera raw will update for photoshop cs6 ?
i know no feature will be added , but i'm talking about camera support
for how much time will be update camera raw for cs6 (camera support ,add new cameras )
sorry for my poor english
thanks

Only adobe knows, but from what they have said, more or less until thay stop selling photoshop cs6, whenever that might be.
http://blogs.adobe.com/lightroomjournal/2013/05/adobe-camera-raw-8-support-for-photoshop-c c-and-photoshop-cs6.html

Problem accessing adobe camera raw in Bridge for CS6

I have a problem accessing adobe camera raw in Bridge (CS6) directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable in Bridge or Accessing Photoshop directly, I get the message: "Bridge's parent application is not active; Bridge requires that qualifying product has been launched at least once to enable this feature." My software is registered with Adobe. Any solutions?feature." My software is registered with Adobe. Any solutions?

Creative Suite Cleaner Tool laufen lassen, neu installieren. Und was auch immer für ein dämliches Update den Schaden verursacht haben mag einfach nicht aufspielen, wenn nicht unbedingt nötig...
Mylenium

How to download Camera Raw 8.2 for CS6 only

I don't want all the other updates, only Camera Raw 8.2.
Where can I download the CR 8.2 updater only?

Hi,
Please open PS CS6, Go to Help->Updates
Uncheck all and only select Camera Raw 8.2 CS6 update and apply.
This way only CS6 ACR would get updated not all updates.
Regards,
Ashutosh

Cant update to Camera Raw 8.3 for CS6 Extended

Creative Cloud prompted me to update Photoshop CC & Bridge CC earlier which I did & Photoshop CC now has Camera Raw 8.3. However, I also have CS6 Extended which still has 8.2.
If I click on update from within CS6, I see this:
Why it says Camera Raw 7 who knows - I already have 8.2. But how to get 8.3 ?? Any ideas anybody?

Well, well - basically the answer is to click update & it updates to ACR8.3 - see this thread here: http://forums.adobe.com/message/5926188#5926188 Adobe do like to confuse us

Can't Upgrade to Camera Raw 8.2 in CS6

Downloaded Camera Raw 8.2 and ran the installer; it seemed to go fine. But, I don't think CS6 is recognizing it. Under Help/ Systems and Updates, it still lists ACR 7.4 as the raw converter. When I try to open a Canon 70D CR-2 file, which ACR 8.2 will cover, I get the msg: "Make sure you have the latest camera raw update in Help/ Updates". 8.2 is not being replaced in CS6. What's going on?

Install what Help / Update offers. "Camera Raw 7" is what ACR for CS6 is called even though it is up to 8.x, now. This is to distinguish it from PS-CC's ACR updates which are designated as "Camera Raw 8". Despite the Updates designations being different numeric versions they are indeed the same update which will be ACR 8.3, by now.
I have PSElements-11, PS-CS6 and PS-CC on my computer and I have Camera Raw, Camera Raw 7 and Camera Raw 8 as ACR updates that are checked for. If there was only ever one ACR update checked for and offered you couldn't update ACR for various products.
On a Windows 7 64-bit system there should be two CR plug-ins, one for the 32-bit version of PS under Program Files (x86) and one for the 64-bit PS under Program Files. Is it possible that you only have the 32-bit or 64-bit version of PS-CS6 installed or were there actually two Camera Raw.8bi files for CS6 and you only mentioned one? If there was indeed only one, then perhaps something isn't isntalled entirely correctly and that is stopping the updates from working. The only way to fix that would be to uninstall CS6 entirely, then re-install it which should put both the 32-bit and 64-bit versions on including the two ACR 7.x plug-ins, then do a Help / Updates and install the latest ACR 8.3 update.
But before you do all that what does running Help / Updates do with Camera Raw 7 as the selected update? Does that complete or does it fail?

My auto updates are not working. I cannot find where to download Camera Raw 8.1 for Photoshop CS6.

My auto updates are not working! I cannot find where to download Camera Raw 8.1 for Photoshop CS6 (Windows 8 64 bit). My Camera Raw is now at 7.1. I had the online Adobe folks tell me to just download all updates manually. That's great, yet I cannot find camera raw 8.1 to download...
Please help.
Thanks, Janet

there's a direct download link on this page: https://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now- available.html

Crop tool in Camera Raw 8.4 for PS CS6

I recently downloaded camera raw 8.4 for use with photoshop CS6. The crop tool in camera raw now only allows me to crop to a ratio rather than to a specific size. I usually crop to 9x13 or 17x22 inches. How do I get this feature back? I prefer and need to crop my work to a specific size.
Thanks, Jeff D.

Good day!
I notice no difference to prior to 8.4.
But maybe the ACR Forum may be a better place for questions realted to ACR.
http://forums.adobe.com/community/cameraraw
Regards,
Pfaffenbichler

Can't open files in Camera Raw while in Bridge CS6

05/30/2014
Believe this issue/problem happened after automatic update from Adobe (but can't be sure).
Have always uploaded files from camera into Bridge then do some editing by opening JPEG and RAW (NEF) files in Camera Raw from Bridge.
Now, "Open in Camera Raw" is greyed out and I am unable to find a way to open files with Camera Raw from inside Bridge CS6. This seemed to happen suddenly and without any new software or applications being added to computer. All other apps/software working well.
Have tried various fixes found on Adobe community discussions without success. Problem now ongoing for over a week +.
Am able to open files in Photoshop with no problem but want to be able to do some quick edits using Camera Raw opening files from Bridge CS6.
I'm using Bridge CS6 Version 5.0.2.4. (as part of Adobe Creative Suite 6). Updater states I have most current version of Bridge installed.
I'm using an iMac computer with Intel Core i7 processor
OS X 10.8.5
Have found others with this same or very similar problems on forums but either can't understand patches/directions or unable to complete instructions on my computer.
for example see: Camera RAW update issue with Bridge CS6
From that link/discussion, one finds this "solution":
After you update to Camera Raw 8.4, Bridge CS6 in Mac OS doesn't display image metadata or allow you to edit images in Camera Raw.
To the top
Manually install the Camera Raw 8.4 plug-in.
Exit Adobe Bridge.
Download the file below.
Locate and double-click the downloaded file to decompress it. The resulting file is Camera Raw.plugin.
Navigate to the Macintosh HD folder.
Open the Library/Application Support/Adobe/Plug-Ins/CS6/File Formats folder.
IMPORTANT: Navigate to the root Library folder on your hard disk, not the Library folder under your user folder.
Copy the Camera Raw.plugin from step 3 into the File Formats folder.
IMPORTANT: This new file overwrites the file already in this folder. It's important that only one Camera Raw.plugin file is in this folder.
Open Adobe Bridge.
Camera Raw.plugin.zip
Mac OS Camera Raw 8.4 plug-in for manual installation
However, when I try the above, I have these issues:
1. When I double click on the downloaded file, my computer opens PhotoShop and an error message is displayed that states "Could not complete your request because Photoshop does not recognize this type of file." (I suspect this may mean my computer has automatically decompressed the file, but I am not certain of that).
2. Not completely certain I know how to "Navigate to the Macintosh HD folder" as suggested in step 4. above (OK, I'm new to Mac; long-time PC user….)
3. When I am in "Finder" and click on "GO" while holding down "Option" key, I find "Library". within that, I can find "Library/Application Support/Adobe" but there is no "Plug-Ins" folder within the "Adobe" subfolder.
4. Not sure how to tell if I am in the "root Library" on my hard disk vs. "Library under my user folder". (Again, new to Mac….)
I have NOT yet tried doing an "Uninstall" and then Re-installing the whole Adobe Creative Suite 6 and would like to avoid that if possible.
Would absolutely LOVE it if Adobe would simply push an update that would fix this problem or if someone would explain to me how I could restore the earlier version that worked perfectly for me.
Any help, suggestions (in very basic, simple terms that any idiot new to the world of Macintosh can understand) would be appreciated. Very frustrated with Adobe at the moment.
Mostly have liked the switch to Mac, but with this and my photo workflow coming to a screeching halt, having second thoughts. (But I suppose Adobe update for PC may cause problems as well.)
Thanks in advance for any help/suggestions.

05/30/2014
Literally minutes after I posted the above, I figured this out myself and now I'm a happy camper and things are back to normal!
Here was my error/issue: as a new Mac user, I was not negotiating/finding files on my hard drive correctly.
In case there are others out there with this same issue (and as dense as I apparently am ):
Here is what I did that resulted in a fix:
First Steps:
1. Quit/close Bridge
2. As noted in post above, go to this link to download Camera Raw Plugin file:
Camera RAW update issue with Bridge CS6
Link to get to download is near end of instructions, but I will attempt to insert that link to download here:
Camera Raw.plugin.zip
3. Once file has been downloaded, find it by using "Finder" Click on "Finder" and look on list of options on left side of Finder window to find "Downloads". On my computer, when clicking on "Finder" these options appear in the list at the left:
All My Files
Airdrop
Applications
Desktop
Documents
Downloads
Movies
Music
Pictures
4. Download you just did should be at or near the top of your downloads list and should be named as "Camera Raw.plugin" and will be 83.5 MB in size
5. I right-clicked (two fingers on touchpad) to bring up drop down options and selected "Copy 'Camera Raw.plugin'" from that list to copy file.
Now, you have copied the plug in that will fix this issue. The second set of steps below will walk you through how to replace the file that is on your hard drive with this plug in file that you have copied.
Second set of steps (and this is where, as a new Mac user, I was confused initially)
1. Again, click on "Finder" on your Mac
2. On top of screen, find "GO" and click on that. (You should see "Finder" in the upper right corner of your screen, then "File, Edit, View, GO, Window, Help" Click on the GO
3. In drop down menu that appears, click on "Computer"
4. Then, double click on "Macintosh HD" to open your hard drive
5. Next, double click on "Library" folder to open that.
6. Next, click on "Application Support" folder to open that.
7. Then, double click on "Adobe" folder to open that.
8. Then, double click on "Plug Ins" folder to open that
9. Now, double click on "CS6" to open that folder.
10. Finally, double click on the "File Formats" folder that appears.
11. NOW, you should see this:
12. Right click (two finger press if using a touch pad) to open window with options. Select "Paste Item" by clicking on that option.
13. You will be prompted with an option to keep existing file OR replace the file. Choose "Replace" to past the new "Camera Raw.plugin" file to this folder.
Finally, if you now go back and open Bridge CS6, you should be good to go.
Hope that helps someone out there.
Hopefully future updates will from Adobe will be better.

Error in updating DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6)

When I tried to update DPS Desktop Tools CS6 32.0.0 and Photoshop Camera Raw 8.7.1 (CS6) in Adobe Photoshop I get the following errors in the error log:
DPS Desktop Tools CS6 32.0.0 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I208
Photoshop Camera Raw 8.7.1(CS6)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I216
I purchased Adobe Creative Suite with my Mac so I have an installed version. I have tried rebooting, but to no avail. When I search for help on the site, none of the help explanations fit (e.g., delete a folder that doesn't exist on my computer). I have a 27 inch iMac running OS X Yosemite version 10.10.1. Thanks.

Sscrase what specific error messages did you receive within the installation log files for the update? You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html.

How do I install camera raw 4.6 (for Nikon D90) in Elements 6 for a Mac?

I need to install camera raw 4.6 (for Nikon D90) plug-in on Elements 6 for at Mac? I'ved downloaded the plug-in but it does not seem to work. I've got Elements 10 on my desktop Mac but I am using Elements 6 on an older iBook G4. Any help will be appreciated. thanks.

For PSE 6, get the .plugin out of the download, then go to your hard drive>library>Application Support>Adobe>plug-ins>file formats and remove the old plug-in, then put just the new .plugin file in there instead. Older versions of PSE can't update ACR from the help menu the way PSE 10 can.

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4

How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
I can access the the download button but after I depress it
I need specific step by step instructions from start to finish
Morty
[email protected]

It would help us if you told us what operating system and version you are using.
generic instructions
Windows
1. Right click on the downloaded Camera_Raw_5_7_updater.zip
    Click on Extract All
2. In the Extract All dialog check Show extracted files when complete, then click on Extract
3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
   In the User Account Control dialog click Yes
Just follow the directions in the install dialog when it opens
Mac
1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
2. When the next window opens, double click on the Setup.app
    In the next window enter your password
Just follow the instructions in the install dialog that appears
I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed

Still Looking for Camera Raw Plug-In for CS4

I have Adobe CS4, and, after extensive searching, cannot find the correct version of the Camera Raw plug-in for my Mac (OS 10.6.8). I just did successfully download and install the DNG converter 8.1 for Macs. Today I downloaded version 5.4 for mac then it told me to quit before proceeding with the installation, that there was a newer version available. Adobe states my camera's minimum requirement for Camera Raw is version 5.4.
file://localhost/Users/Cea/Desktop/Adobe%20Camera%20Raw%20cannot%20install%20message.tiff
Can anyone guide me to the right one? Camera Raw only been a dream until now. I finally have a great DSLR that supports raw, I've been playing around with it in iPhoto, but it's now time for me to take this to the next level.
Thanks very much.

Ask such specific questions on the Camera RAW or Photoshop forums and include info about your camera. If it's a newer model, this may ber perfectly normal and the files may require you to upgrade to CS5.1 so you can use the latest versions of Camera RAW or use the standalone DNG converter...
Mylenium

How do I access Camera Raw Plug-in for PSE 11?

I can't figure out how to access the Camera Raw plug-in for Photoshop Elements 11 ( on a Macbook Pro OSX.) I recently installed PSE 11, and when I select "about plug-in" within the app, it brings up a box that shows version 7.1.0.354. Does that mean it's already installed? If so, how do I access it to edit a photo? In past PSE versions I simply chose "Open file / as Camera Raw" but that option doesn't come up.

In the File Open dialog ensure you have All Readable Documents selected for Enable.
Click on the file you want to open
Change the Format to Camera Raw

Camera RAW 8.3 For CS6

Similar Messages

Maybe you are looking for