Camera raw 8.3 preview now allways shows all changes instead the changes by tab
Since the last update now " the previw" shows all the changes made in all tabs instead tab by tab
Really hope someone can help me with this one.
regards
M.Steyaert
Agreed, while I welcome the ability to preview all the changes at once, I would like to retain the old functionality of the tab by tab preview. Hard to tell if you have used excessive noise reduction if that part of the image is as not visible without the general tad adjustments present (when trying to compare for detail loss).
Also well explained here: https://forums.adobe.com/message/6292569#6292569
A workaround for now would be to close the image and re-open after you're happy with each tab (as if you get them all right first time!).
Similar Messages
-
Bridge does not show my Camera Raw Adjustments in previews or thumbnails.
Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
(Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Chipset Model: NVIDIA GeForce GT 120
Type: GPU
Bus: PCIe
Slot: Slot-4
PCIe Lane Width: x4
VRAM (Total): 512 MB -
Adobe Camera Raw 7.4 is now available for Photoshop Elements 11
Adobe Camera Raw (ACR) 7.4 is now available to download for Photoshop Elements 11. More information regarding the additonal camera support added can be found at link here. For updating your camera raw plug-in in Photoshop Elements 11 follow the steps mentioned in blog post: http://blogs.adobe.com/pselements/adobe-camera-raw-7-4-is-now-available-for-photoshop-elem ents-11/
Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download click here DNG Converter 7.4
Mac download click here DNG Converter 7.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
My nef files used to open in camera raw 8.6. Now when I drag and drop they go straight to photoshop cs6. I don't have the option to edit them in the camera raw editor! Help!
Which operating system are you using?
What is your screen resolution set at? -
I have downloaded the most recent updates on my computer to Photoshop and to Bridge and I am still unable to open images in camera raw to edit them. When I try to open the "Camera Raw Preferences" in Bridge, nothing happens. Could this be a problem with my computer and not the software? Any advice would be GREATLY appreciated.
Sorry, I cannot take your word for your "the most recent updates". Very often users think they have the latest and greatest and it turns out they are wrong.
Please specify EXACT version numbers.
Also, more info is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong? Thanks!
This is the last paragraph from my very first response to you, post #1 in this thread:
…Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs. [emphasis added] -
Does camera raw 7.0 support Canon 5d mark iii? on the list it said 6.7 and 7.1 which makes confused because 7.0 is in between.
Which version of photoshop and operating system are you using?
If you have photoshop cs6 you should use Help>Updates to get the latest camera raw.
Camera raw 7.0 was just the shipping version of camera raw for photoshop cs6 and you should update it to a newer version.
The camera raw version on that list is just the oldest version of camera raw to support a particular camera and newer versions of camera raw carry on that support as well. -
I have Photoshop 13.01 64x installed; also I have installed Camera Raw 8.4.0.199. Nevertheless I cannot find the Camera Raw Filter in the "Filter" Menu. Pls help me!
I am not sure.... maybe you are right... that would be too bad actually Do you have a link available where I could check this?
-
Irecently upgraded my Iphone 3GS from 4.1 to 6.0 using Itunes. Now its showing me message that the phone cannot be activated. What can i do ? The phone was Jail Br
iPhones can be unlocked in the U.S. as well and in a number of countries - by the carrier the iPhone was sold as carrier locked with, which doesn't require an Apple store and has nothing whatsoever to do with hacking an iPhone.
Hacking an iPhone is against the iOS license agreement, which you have violated.
If you think upgrading an iPhone isn't easy, I feel sorry for you. Upgrading an iPhone that hasn't been hacked to be unlocked or for any other reason is easy, but hacking as you have done can and does cause problems - you have severely altered the operating system making the iPhone as insecure as that swiss cheese for security garbage that is Windows and Android just for starters.
Dropping back in the market to Nokia and Microslop?
Wrong, and too funny, but thanks for my laugh for the day. -
Spotlight Show All Results At The Bottom!
In Spotlight, Show All Results used to be at the top. After typing in the query in the Spotlight field, I used to tap on the Up arrow and get right to Show All Results. Quite fast with the keyboard, without even touching the mouse.
Now I have to go to the bottom of the list, either with the mouse or with the down key. S-l-o-w-l-y. Irritating to say the least.
Is there a way to change this and bring Show All Results to the top? Or at least a shortcut to go right to the bottom? Oh that would be nice, just keeping in mind the poor power users… :-)The result appears at the center unless there are multiple results on the screen and in this case Firefox doesn't scroll to center the next result.
*Bug 171237 - Find in Page: highlighted result should be at the middle of the page (vertically centered) instead of last line/bottom of page
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i> -
We have multiple devices in the family, including now 4 iphones, all who share the same Apple ID. I want to stop this, but need thoughts on multiple IDs as Findmyphone works well as same ID?!
I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!! -
How to show all items in the reading list? I think this option has been removed in Safari Version 7.0.2
Thanks. That solved it. I had my doubts since I wasn't concerned about my lost bookmarks. I was concerned about the broken functionality. In any event, restoring from a backup solved both the functionality and the lost bookmarks. I appreciate the response!
-
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
How do I get a longer list of items in the history window - and not have to click "Show All History"? The default list is too short.
Well I figured it out… all you do say show commands :-/
-
PSE 7 Organizer shows all pictures instead of the selected ones
When i make a selectin in the organizer it will always show all pictures instead of only the selection. This also happens when i create a smart photoalbum, it includes all photo's. It only adds a "not-selected sign" to the photo, but it will still show.
Are the photos with the red circle-slash icon in stacks or version sets? See this FAQ:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Searches_are_showing
Maybe you are looking for
-
Display multiple parameters in report header
i am attempting to display a multiple parameter selection in my report header i user join({?parameter},",") in the stored proc it is a varchar in the formula editor i receive this error a string array is required here what do i need to do to display
-
Creating module pool programming in abap objects
Hello... I just wanted to know how u create a give modulepool programming in classes and objects.Could anyone tell me the procedure how to do so.And i knew that module pool programming has become obsolete and now everyone are using object oriented co
-
Labview FPGA compile stuck at "Place and Routing"
I am using LabVIEW 2010 SP1 32-bit FPGA module. I've built a very large program that was first done back using LabVIEW 8.6, so I have several years experience on LabVIEW FPGA. When I say it's a large program, I mean that a several times over the las
-
I am not sure if this is a Finder issue, or Preview issue. When I edit a jpg in Preview, the Finder thumbnail stays the same as before. How can I make the thumbnails update? ...Al
-
Is anyone else's Flight Tracker widget busted?
Anytime I try to type in any of the three fields I get a beep and it doesn't respond. The only way I'm about to adjust airline, departing citing and destination is by using the drop down box. It didn't use to be this way. I've tried logging off/loggi