Camera raw and Photoshop CS3 from Lightroom

(2.5) If I open a raw image from Windows Explorer or Bridge (which I don't use much), Camera Raw 4.6 opens. It doesn't open if I Edit In Photoshop CS3 from Lightroom, but says "This version of Lightroom may require the Photoshop Camera Raw plug-in version 5.5 for full compatibility. Camera Raw version 4.6 is the latest version available for Photoshop CS3".
There are two choices: Render using Lightroom and Open Anyway. If I say the former, it doesn't use the file name, but does something like -2.tif.
I'm not sure what these two choices actually do.
Secondly, if things were working properly, would Lightroom actually open the Camera Raw window? If so, is there anything I can do short of upgrading PS to CS4?
Thanks.

Just a little history of the profiles being displayed for your camera model. The camera calibration tab only displays the profiles that are specific to your camera and model. The earler profiles were named after the version of ACR that was in use when they were created.
So.
ACR 4.2 the first profile created for your camera model when support was introduced.
ACR 4.4, Adobe created/ updated new profiles for most of the supported camera models with this release of ACR.
Adobe Standard Beta, updated profile when the Beta of ACR 5.0 and LR 2.0 were introduced.
Adobe Standard, Updated profile for the final release of ACR 5.0 and LR 2.0. This then is the latest profile created for your camera model. I think it should be the closest to your camera standard.
Adobe did not create any other camera matching profiles Vivid, Neutral etc other than for the more popular Nikon and Canon models.  I have an Olympus so I am in the same boat.

Similar Messages

  • Camera RAW and Photoshop won't support RAW photos from my new Panasonic Lumix FZ70

    I have a new camera, Panasonic Lumix FZ70.  When I try to open  RAW images on my compupter or in Photoshop CS5.1, I get a message that says Camera Raw and Photoshop don't support RAW images from this camera.  What can I do to fix this? Thank you!

    Support is available with ACR 8.2 release which works with PS CS6 and CC.
    DNG converter can be downloaded from following link:
    http://blogs.adobe.com/lightroomjournal/2013/09/camera-raw-8-2-and-dng-converter-8-2-now-a vailable.html
    Regards,
    Ashutosh

  • Camera Raw and Photoshop fluctuations

    When I open a JPG from Camera Raw and view it in Photoshop I'm noticing that the Photoshop version, viewed at 100%, is slightly darker, viewed side-by-side, than the preview in Camera Raw, also at 100%. Both in the same color space (sRGB).
    Interestingly, when I changed the color settings in Photoshop to Adobe RGB and then reprocessed the photo in Camera Raw as an Adobe RGB file and then opened it in Photoshop, the side-by-side comparison shows the Photoshop version as slightly lighter, not darker, than the version shown in the preview window in Camera Raw. Both also at 100%.
    Any thoughts on the subject would be very much appreciated. Thank you. Tom
    Photoshop CS3
    Camera Raw 4.3.1
    aluminum imac 17" display, 2.4 GHz Intel Core 2 Duo
    2 GB 667 MHx DDR2 SDRAM
    Mac OSX 10.4.11

    >
    Both Camera Raw and Photoshop are using your display profile to make the image preview. If the two don't match (everything matches on my displays) I suspect your display profile is less than optimal.

  • When will Camera Raw and Photoshop support Nikon 610 cameras

    When will Camera Raw and Photoshop support Nikon 610 cameras

    Hi,
    What version of photoshop and operating system are you using?
    Photoshop cs6 and photoshop cc should open those files.
    You might just need to go to Help>Updates from within photoshop cs6/cc to get an updated camera raw plugin
    Camera raw 8.3 or 8.4, depending on your operating system.

  • Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge

    Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge it then the white square reappears. I do not believe the squares are saved

    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://forums.adobe.com/docs/DOC-2325

  • Why does my Photoshop Cs6 not let me view my Nikon D7100 photos in Camera Raw and photoshop when it does my Nikon D700?

    Why does my Photoshop CS6 not allow me to download my Nikon D7100 photos into camera raw and photoshop when it does my NIkon d700?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    D700 first supported in Adobe Camera Raw (ACR) 5.1 (CS6 ships with ACR 7.0)
    D7100 first supported in ACR 7.4
    You probably just need to update Camera Raw in CS6 via Help > Updates.
    Confirm which ACR version you have installed via Help (Win) or Photoshop (Mac) > About Plug-In > Camera Raw.

  • Corrupted RAW in Bridge CC, Camera RAW and Photoshop CC

    Hello,
    I am using up to date versions of Bridge CC, Camera RAW nad Photoshop CC and I have the following problem.
    - after transfer photos from Canon EOS 6D to computer thumbnails in Bridge seems to be fine
    - when I open file in Camera RAW file seem as below example
    - when I open file in Photoshop CC file seem as below example
    - when I open RAW in IrfanView image seems to be fine
    - I can open image in IrfanView, save as TIFF and in Bridge and Photoshop seems to be fine
    - the problem occurs randomly, about 5% of images from 500 images
    Do you have similar problem? Does anybody have any idea?

    The previews are ok in Bridge because it's just a preview jpg, not the actual RAW file.   I'm not sure why it would open OK in Irfanview.  I had a similar problem after a HDD crash and tried Irfanview with no more luck than any of the Adobe programs.
    Have you tried Adobe's DNG converter to see if you get the same result?  Is this a consistent problem, or just this one time?

  • How to access Camera Raw when invoking CS5 from Lightroom 3?

    When I invoke CS5 from Lightroom, my NEF files seem to load directly without giving me an opportunity to make adjustments in Camera Raw. If I open the same NEF file from windows Explorer, CS5 presents the Camera Raw adjustment page and I can make adjustments before proceeding.
    How can I work around this?
    BTW I know I can make camera raw adjustments in Lightroom and then open in CS5, however for an image that I know I will be using CS5 on anyway, I don't want to do anything at all in LR just go direct to CS5 but I can't do this if this bypasses my ability to make adjustments in camera raw!
    I must be missing something here, can anyone point me in the right direction?
    [I'm using Camera Raw 6.1, LR3, CS5 12.0.1 x64; Invoking CS5 from LR3 by right-click on image, Edit In > Edit in Adobe Photoshop CS5]

    That workaround did work for me so thanks for the helpful reply!
    If anyone else has other ways of making this work I'd like to hear about it.
    Thanks,
    Eric

  • Adobe Camera Raw and Photoshop Actions

    Hi guys,
      I'm having troubles with Adobe Camera Raw settings and Photoshop actions. Basically, here is what I want to do :
      apply settings for the general colours, exposure, tint, etc., but keep an automatic undistortion of the images thanks to the metadata of the CR2 file.
      The preset I've done is working fine, and when I'm in ACR, I can apply the same preset to different photos with different lenses. Then when I'm opening them in photoshop, they look allright.
      The problem seems to appear when I'm creating the action in photoshop. No matter if the lens profile is set to 'auto' in the preset, it looks like it's applying the one from the original preset. Then let's say the preset was created with a 50mm, then when I launch the action on a 85mm, the undistortion is wrong ...
      If anybody has an idea how to fix the problem, that would be really helpful !
      Thanks a lot,
      Julien

    This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention. I understand that it is difficult to determine which forum to post in since there are so many.
    I'll put I this posting in the photoshop community so the experts there can help you.
    We also have many other forums relating to other Adobe products
    http://forums.adobe.com/community/
    http://forums.adobe.com
    Out of curiosity, can you tell me how you found our forum page?

  • Camera Raw to Photoshop CS3 fades the file

    I open Nikon files in Adobe Camera Raw, make changes and either open as a smart object, open as a file or save, then open in Photoshop.  No matter how I do it the image looks faded and flat.  In Camera Raw it looks great, in Photoshop I have to start in with Curves, etc to re-fix it.  Kind of double work.  The Nikon.plugin is not on my computer anywhere.
    For a while it was so frustrating that I just gave up making any changes in ACR and made them all in Photoshop. But I'm trying to get back to doing adjustments in ACR so hopefully someone knows what I'm doing wrong?

    At the very least you should read http://help.adobe.com/en_US/Photoshop/11.0/WSD8679923-671F-4615-8E9F-CC7A57B00130.html and click the various links on the page.
    As for printing to sheetfe, just select an appropriate profile then save the setting as a custom setting. For example, in Europe, you may find Coated FOGRA27 suits your workflow better than Euroscale Coated V2. There are US Sheetfed profiles to choose from as well if based in the US.
    Keep Color Management Policies set to Preserve Embeded Profiles and Profile Mismatches ticked (all three boxes) till you understand what's happening when you open files.

  • How to install Camera Raw in photoshop CS3

    How can we install a Camera Raw 4.6 in Adobe Photoshop CS3 version

    And what exactly is the question behind your question? Do you need a download package or do you get any warnings? This should be handled automatically when you choose Help --> Check for Updates otehrwise.
    Mylenium

  • Camera Raw and Photoshop Cs6 editing not allowed

    All of a sudden I can no longer use Camera Raw editing or open Photoshop CS6 . The message says that a qualifying product must be launched at least once to enable this feature. I have no idea why this has happened.

    Are you on a Mac?
    Are you running Bridge 5.0.2? It seems to have helped many who have encountered somethng similar.
    http://www.adobe.com/support/downloads/product.jsp?product=108&platform=Macintosh

  • Lightroom 3 and Photoshop CS3 do not recognise Canon PowerShot S90 raw files

    My husband has lightroom 3 and Photoshop CS3 but they don't recognise CanonPowershot S90 camera raw files. I've tried searching for the problem on internet but can't find anything that helps. Adobe's DNG converter doesn't work either. I've tried different versions of the DNG converter to no avail. Buying a new Adobe product is out of the question.
    Another problem is that his e-mail address has been changed so that he can't login to his Adobe account. We used to be able to contact Adobe Netherlands by phone or email but that option isn't available anymore.
    Can anyone help please?

    Go to here:
    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 3.6
    or here:
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 3.6
    for the final versions of LR3. Download and install the software. You do not need to remove your present installation first, LR will install over it and fix any faults that now exist.
    Your husband can log onto his Adobe account with the old email address and when in the account can edit the address to the new one.

  • Camera raw and bridge: no dialogue in cs3

    After purchasing the Nikon D300 I had to upgrade from CS2 to CS3 as former versions of photoshop are unable to manage the RAW files (NEF) generated by the new camera.
    My problem is that, even having downloaded the 4.3.1 version of Camera Raw and having installed it, there is no dialogue with bridge. I tried to reinstall CS3 as well.
    This means:
    - I miss the Camera Raw preferences setting (under the edit menu in bridge)
    - Always in Bridge I cannot cut and paste (copy and apply) camera raw settings of one photo to others. Neither selecting the edit menu, nor with the mouse's right button.
    The point is not that these and similar selections do not work, the point is that they do not even appear in the menus. The help resources, for instance, tell about a Edit > Develop Settings function that is not present in my menu.
    What is wrong? Is it possible that there is any kind of conflict with Nikon capture NX?
    I'll be grateful to anyone able to help me,
    fm

    Hi All,
    Been reading this thread with interest.
    I am on PC with XP, I have been using CS3 for quite a while now and both my D200 and D300 have all been working perfectly. But over the last few months I have noticed that Bridge was (a) very slow to start and (b) would suddenly come up with the "Bridge has encountered a problem and must close" message. Then it got to the stage were Bridge would not open at all and just the "Problem" message would show and then next PS3 then starting displayed the "There has been a cataclysmic Failure" message.
    So I have used the original CS3 CD and uninstalled and reinstalled and got both programs working but no Camera Raw. If I click on the NEF file it goes to PS and gets the message wrong file type. All the preferences are set ok.
    The other thing that happened was when I downloaded all the updates, Bridge went back to not opening and the "problem" message showing again.
    After reading Xoslic message I will try to take out the registry entries and reinstall again and see if that works.
    For all of you on Nikon, CS3 was working perfectly for me until just recently, so I know that it does work fine.
    Hopefully I will get a soloution and let you know if it works.
    Gerry
    PS. I also had a problem in that Lightroom 1.4 would not work either, opened ok but "lightroom has encountered a problem" message appeared and it closed down. Other people suggested that the problem lay in "Version Cue"

Maybe you are looking for

  • Headers and footer formatting changes when word docs are loaded to pages

    I have loaded template word documents from my Imac to ipad pages. If I turn around and email the template out, the heading formatting has changed. Is there a list of specific fonts I can import word-docs with to not do this? Also, when I click on the

  • RV016 not working correctly.....

    Hi, We've setup an RV016 to run with 2 internet lines and load balanced, the problem I seem to be facing is relating to browsers. People are connected to things such as MSN but when trying to browse the net it just seems to be extremely slow or non-r

  • Black screan on pavilion dv6-6102sa

    Hi, Can you help? I have a HP Pavilion dv6-6102sa and when I turn it on all I get is a black screen, the enter button light flashes 5 times in a repeated sequence also the f12 (wifi button) is red. Would appreciate any help. Cheers Andy

  • Any Reports show PM Orders Number, GL Number, Cost Element and the amount?

    Hi Experts, Are there any reports that display the PM Orders Number, GL Number, Cost Element and the amount? currently i have to use IW32 and click the COSTS tab then click button REP.PLAN/ACT. to view these information. Please Advise Thank you Regar

  • Not starting. Hard drive/?

    Just the spinning spokes. I tried installing Leopard, since I had the disks here, but it couldn't find the hard drive. ASnything else I should try?