Camera Raw Apparently Not Present On Second Installation Of Elements 10

I have installed Elements 10 onto my desktop which works fine. When opening a .NEF file or when opening a JPEG using 'Open As Raw', the Camera Raw interface comes up.
I have also installed Elements 10 onto my netbook. Whilst the prgram itself works fine, the Camera Raw interface doesn't appear to come up when loading .NEF files or opening JPEGS as 'Open As Camera Raw'. I have downloaded and installed the latest Camera Raw from the Adobe website.
Can anyone supply any reasons for this and how I solve the problem?
Many thanks.

Have you set the program to open directly with either the Editor or Organizer? If so click on the home button (house symbol near top right) and choose Photoshop Elements welcome Screen. Then try the three keys with one click on the edit button.
Before doing that make sure the program closed down properly by clicking Ctrl+Alt+Delete. Click n the applications tab and highlight any Adobe application and then click the End task button.
Also are you trying to open a file from the Organizer. Have you tried going to a folder and right clicking on a NEF file and choosing open with Photoshop Element Editor?
If non of that works you may need to uninstall and then reinstall.
 

Similar Messages

  • No matter what I try, Camera Raw will not update from 8.3 to 8.4.1 in PS CC

    I've tried completely uninstalling Bridge and Photoshop CC and reinstalling and I'm still on Camera Raw 8.3.
    It just will not update.
    I also tried the link to manually install and it just says the patch is not applicable.
    Any ideas why even after completely removing and reinstalling both Bridge and Photoshop my Camera Raw will not update?
    Thanks

    When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply.  Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum.  So as you say, I had not read the thread, because it was on a forum I didn't subscribe to.  So be shocked and perhaps awed as is necessary.  My treat.
    Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
    Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
    There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
    Keeping Photoshop Up-To-Date
    You might check what version of PS-CC you have.  14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know. 
    If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates.  It may need to be run several times.
    Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
    The CS Cleaner can be found, here:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Adobe camera raw will not respond in bridge cs6?

    adobe camera raw does not respond in adobe bridge? I am trying to open Jpegs, which i have previously been able to do so by right clicking and opening in adobe camera raw. Now it is unresponsive.

    dj1461986
    You are definitely in the wrong forum for Bridge CS6 and Adobe Camera Raw. You have posted in the Adobe Premiere Elements Forum (video editing focus).
    You probably want to be posting in the Photoshop Forum.
    http://forums.adobe.com/community/photoshop
    My preliminary findings suggest possible workaround
    a. Open camera raw in Photoshop 5 or 5.5 and then open edited raw image in Bridge CS6
    or
    b. There is a preferences route to check out.
    Not being a Photoshop user, this is a quick suggestion where you might start looking. This is apparently a known issue.
    The Photoshop users should be able to give you all the details and options you have for workarounds for now.
    ATR
    Add On...Please repost in Photoshop Forum or wait for a moderator here to see your thread here and move it from here to there.

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.  The bridge no longer shows the picture view of my NEF files.  These are Nikon NEF files from the Nikon 5100 DSLR camera.  How do I fix this?

    I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.  I get a message saying that Camera Raw does not support my camera type but it always has in the past.
    When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
    Camera Raw plug-in | Supported cameras
    The D5100 was first supported in Camera Raw version 6.4.
    In Photoshop, click Help > Updates to update Camera Raw.

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • New Nikon Df camera RAW files not recognized in Bridge and Photoshop.

    New Nikon Df camera RAW files not recognized in Bridge and Photoshop.  Is there a fix?  Surely Adobe make a mistake and not keep up with Nikon.

    I looked at the current list http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html and did not see the Nikon DF listed.
    Would post in ACR forum and see if they know anything more.  http://forums.adobe.com/community/cameraraw

  • Camera raw is NOT there in photoshop CS 6 update from CS 5

    I have just upgraded from photoshop CS5 to photoshop CS 6 and there is no camera raw plugin in CS 6.  its not there at all.   I can't update it because it isn't there..."could not complete the Camera Raw command because Adobe Camera Raw plugin cannot be found." I have installed the Photoshop CS 6 update 3 times to no avail. Camera raw will not update because there is no plugin to update. I am running Mountain Lion. 10.8.2

    Please try below troubleshooting steps to resolve the issue:
    If you are using Mac operating system try following steps:
    Give read and write permissions to Application support folders from both the library's
    Then re-install Photoshop CS 6.
    Issue reason, lack of permissions to concern folders from your Library hence Photoshop is not able to access the camera raw or not able to install camera raw successfully.
    above provided steps are the only resolution for this issue.
    Regard's
    Vijay.
    birgit 1 wrote:
    Thanks, that is interesting and something I had not previously noted.  If I import RAW files to CR direct from a folder, it is still a NEF.  But Aperture changes all NEF's to TIFFs.  OTOH, at least I once again have my CR opening in PS.

  • Message states that Camera Raw is not enabled after transferring data to a new MacbookPro

    Using photoshop and Bridge CS6.
    When I attempt to open a photo in Camera raw I receive this message Camera Raw is not enabled.
    "Camera raw requires that a qualifying product has been launched at least once to enable this feature.

    had to wipe and reload

  • Camera RAW does NOT yet support raw files for the new  Canon Sureshot S95

    Camera RAW does NOT yet support raw files for the new
    Canon Sureshot S95.
    Adobe, please can you provide an update asap

    Hello!
    I think that you need to be patient.
    There has not been any release of Camera Raw since the release of the camera.
    I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
    Usually, Adobe is amongs the firsts to support a new camera.
    Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

  • Edits made in earlier Camera Raws are not displaying in CS6 Bridge for PC

    All the painstaking adjustments and croppings I've made over the years to my raw files in earlier versions of Camera Raw do not show up in CS6. It's as though I never did any adjustments.
    But if I open the files in CS6 Camera Raw and make a tiny tweak adjustment for all files (such as +1 in saturation), then the entire set of previous adjustments DOES show up in CS6 Bridge.
    I have uninstalled and reinstalled Photoshop CS6 a whole bunch of times and this never corrects!
    Is there any fix for this? Or did I just get a BAD copy of Photoshop CS6 and am stuck, since there doesn't seem to be ANY support from Adobe for this. 
    I am subscribed to CC and this problem does not happen in CC Bridge, but I want to maintain CS6 because I don’t trust Adobe to keep the CC price at something I can afford.
    PLEASE can someone offer a suggestion???

    You have thumbnails set to embedded.  They will not show edits unless you opt for some version of HQ thumbnails, but these take up a lot more room and and slower to build.  Your choice.

  • Camera Raw changes not saving

    Changes done in Camera Raw are not saving to be usable in PS or other programs.
    I am using CS6 with windows 7.
    I accidentally took a heap of photos in jpeg. I edited them in Camera Raw - then save the changes in jpeg format but still no changes showing in PS. I have tried Save As, Done, Open image but the changes are not appearing in my PS

    Penny,
    The button at bottom, "Open Image", doesn't mean "open an image in Camera Raw". It means "open the currently displayed image in a new document in Photoshop".
    "Open Image" will pass the adjusted image that you are viewing, not the file itself, to Photoshop where a new document will open and contain the image. The current Camera Raw adjustments for the file it has open will simultaneously be saved and Camera Raw will close.
    Hold down Shift key to see the button change to "Open Object" which will result in a new Photoshop document being opened containing a Smart Object which encloses an independant duplicate of the file and adjustments which you are currently viewing in Camera Raw. The current Camera Raw adjustments for the file it has open will simultaneously be saved and Camera Raw will close.
    Hold down Option/Alt key to see the button change to "Open Copy" which is like "Open Image" except the adjustments which you are currently making in Camera Raw will only affect the image that is sent to Photoshop and adjustments will not be saved.

  • Camera Raw does not read previously saved XMP files (Canon 60D)

    Hi,
    I want to ask if it is a real problem or just me doing something wrong.
    I open RAW files made with Canon 60D (Photoshop CS5, Camera Raw 6.6), then I do what a do (cropping, exposure changes, sharpen ... etc.), then I click the Done button. Camera Raw saves XMP files along with the RAW files. After this I want to do some more editing, I open the RAW files, but Camera RAW does not "remember" what it did just minutes before. I suppose that it is not reading the XMP files that it created.
    So is it me or it is some kind of bug?
    I don't have this problem when editing RAW files made with Canon 400D.
    Thanks for your time!

    Bo LeBeau wrote:
    If I understand correctly the issue is not viewing in Bridge, but rather that ACR doesn't remember the changes.
    There is a discussion in the Camera Raw forum about this issue of not always reading the changes after clicking Done in ACR.
    But no solution.
    http://forums.adobe.com/message/4096784#4096784
    Yes, ACR doesn't remember/show the changes I made.
    It seems that I have the same problem as the other forum member from the link. I tried to recreate the issue, but this time all went well and ACR displayed the changes I made ...
    It is strange because I had the issue numerous times on two different windows PC's ...
    Message was edited by: Orhan Chakarov

  • Camera Raw CS6 not working properly

    I have upagraded from Ps Cs5 to CS6.
    I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
    After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
    Some body can help me ?
    I work with the last version of Br and Ps CS6.
    Thanks,
    Michel,   [email protected]

    Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
    Salutations and many thanks from Guadeloupe, French West Indies
    Michel GOGNY-GOUBERT
    Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
    Re: Camera Raw CS6 not working properly
    created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
    If you have Nik plugins installed, please check reply # 8 on this thread:
    http://forums.adobe.com/message/6045415#6045415
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Camera Raw at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How to compare 2 different database to get table name which are not present in second database

    How to compare 2 different database to get table name which are not present in second database

    Sorry cannot test it right now
    use db1
    go
    select * from sys.tables t where not exists
    (select * from db2.sys.tables s where t.object_id=s.object_id)
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

Maybe you are looking for