Camera Raw blu image with white x in it. Does not show real image
Does anybody know about this? Just installed Photoshop CC 2014 with Camera Raw and now i do not see the NEF imported image in camera raw?
Do i miss a extra plugin maybe?
thanks for the help
Turn off GPU Acceleration in the CR Preferences. This X happens if ACR gets an error trying to render things using the GPU.
Similar Messages
-
I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?
I am trying to softproof an image using a CMYK .icc file. I sent an image from LR 5 to PS CC 2014, opened the Camera Raw FIlter, but the hyperlink to access workflow is not showing up in the CR dialogue box... Any ideas why this might be?
-
I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?
Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same. -
When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.
Did you select View->Bcc Address Field from the menu bar?
-
My new ipad will not sync with itunes. the device does not show up in itunes
my new ipad will not sync with itunes. the device does not show up in itunes. I am on a Windows system
Do you have the absolute latest version of iTunes downloaded? If your iTunes software has not been updated in some time, your iPad will not be recognized. With iTunes open, click on Store at the top. Check for available downloads and if there are any, download them. Once you've verified you have the latest software, connect your device again, and it should be recognized.
-
Now that I have upgraded iPhoto and my iPhone, when I connect my phone to the computer, the phone does not show up in iPhoto and I no longer am asked if I wasnt to import my photos. I haven't upgraded to iCloud yet.
You don't not with a crack screen.
-
CC app has a yellow and blue shield on it and the app does not show all my apps.
When I click on the app, it does not show all assets I have and does not show the listing of all the assets and their status. How can I correct this? Vij
Hi Vij,
Kindly share the below mentioned details, so that we can try to assist you with this.
OS version:
Screenshot of the app:
Thanks,
Atul Saini -
when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.
Dropbox "Camera upload" option just rename the files and looks like this.
-
HI, when i now hook up my A510 camera to the computer, the scan to printer page does not show
My A510 camera does not come up on my computer so I can save and print.
I assume you're using Windows? Is it XP, 7? 8?
Here's previous advice given by Richard, a Canon product export, that might apply:
This sounds like the driver for your camera is corrupted. You should be able to resolve this by removing, then reinstalling the driver.
With your camera connected and turned on in the playback mode:
1- Right-Click on "Computer" (in the menu) and choose "Properties".
2- In the upper left-hand corner, click on the "Device Manager" link.
3- Once in Device Manager, find the "Portable Devices" group and click on the "+" sign in front of it.
4- If you see your PowerShot camera listed, right-click on it and choose "Uninstall" and allow the "uninstall" to proceed.
5- Now turn the camera off. Wait a few seconds and then turn your camera on.
from: http://forums.usa.canon.com/t5/PowerShot/SD750-no-autoplay-in-Windows-7/m-p/6445/highlight/true#M161 -
Blue Ray disk created using premiere 10 does not show menus
I have a video project with a main menu and 5 scene menus. I burn the project (using premiere Elements 10) to a Blue-ray disc using preset H.264 1920x1080i PAL Dolby with quality option set to "Fit Contents to available space" . The software happily creates the disc with 17.6GB of data (main stream, 00000.m2ts is 18,413,568 KB (17.5GB) and 6 small streams for main & scene menus.
However, when this disc is reinserted into the drive, it does not automatically start with the main menu.
If I burn the same project to a DVD with PAL_Widescreen_DolbyDVD preset with quality option set to "Fit Contents to available space", it creates the DVD which, when reinserted into the drive, starts automatically with the main menu.
The environment is Wndows 7 64bit with SONY BD RW BWU-500S ATA Device .
What do I need to do to get the Blue Ray disc to start with the main menu?
KillyKilly
Thanks for the reply.
Any day now I am intending to update the following blog post dealing with the type of computer Blu-ray playback situation that you are facing, but I have not gotten to it yet.
Please review the blog post. It will give an idea of some of the issues involved.
ATR Premiere Elements Troubleshooting: PE: Blu-ray Computer Playback and More
Please look at the Media Player Classic HC x64.
The VCL player description is for 2.0.8, 32 bit, the latest non beta version at the time (August 2013). But the principles should hold up in later versions of the VCL Player.
I should have updates on my 2013 observations soon.
ATR -
Secured sites are not showing that little padlock on the bottom right corner,like the old version of firefox did, indicating its a safe site, example banking,emails etc etc.not sure weather im safe or not please explain.
The padlock has been removed in Firefox 4 and replaced with the [[Site Identity button]]
Install this add-on to get it back: https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/ -
Also, iTunes does not detect any device connected to the computer.
Hi, Arthur330.
Thank you for the question. I am unsure if you are having the issue with your device not being recognized on a Windows or Mac computer so I will include the troubleshooting articles for both below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Jason H. -
Mar 28, 2013 11:36 AM
Have read a couple of "how to" downloads (iMovie'11:import video), followed the instructions with no success. Am using cable with firewire connector.
Any ideas?
thanks,
Bevo 36
MacBook Pro, Mac OS X (10.7.5)Hi - my notes on this
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W -
Advanced Antialias in combination with a lot of text does not show well
I am using embedded fonts in combination with antiAliasType ADVANCED which gives good results for smaller fontsizes.
But if the textField contains a lot of text (> 20000 characters) then part of the text is simply NOT shown. So the first couple of hundreds of lines are shown, then a couple of hundereds are not, then the next again are shown and so on. I have experimented with different values of the sharpness, but without results. Anyone any idea?
Thanks!
_textField.antiAliasType=AntiAliasType.ADVANCED
_textField.sharpness=300I cannot reproduce this issue with neither dynamic nor authoring font embedding approach. All text displays fine.
You may need to make sure that font you embed has all the characters first.
The code I used:
In Flash IDE (given Arial is embedded):
init();
function init():void
var tf:TextField = new TextField();
tf.multiline = tf.wordWrap = true;
tf.width = 1200;
tf.autoSize = "left";
tf.embedFonts = true;
tf.antiAliasType = AntiAliasType.ADVANCED;
tf.sharpness = 300;
tf.defaultTextFormat = new TextFormat("Arial", 9);
tf.text = "";
addChild(tf);
while (tf.text.length < 20000) {
tf.appendText(" " + String.fromCharCode(33 + Math.random() * 93));
And as a document class with Embed metatag:
package
import flash.display.Sprite;
import flash.text.AntiAliasType;
import flash.text.Font;
import flash.text.TextField;
import flash.text.TextFormat;
public class LargeText extends Sprite
[Embed(systemFont="Arial",fontName="_arial",mimeType="application/x-font-truetype",embedAsCFF="false")]
private var font:Class;
public function LargeText()
init();
private function init():void
var tf:TextField = new TextField();
tf.multiline = tf.wordWrap = true;
tf.width = 1200;
tf.autoSize = "left";
tf.embedFonts = true;
tf.antiAliasType = AntiAliasType.ADVANCED;
tf.sharpness = 300;
tf.defaultTextFormat = new TextFormat("_arial", 9);
tf.text = "";
addChild(tf);
while (tf.text.length < 20000)
tf.appendText(" " + String.fromCharCode(33 + Math.random() * 93));
Maybe you are looking for
-
Cold and dead in the mountains
So i spent a lot of money on this imac 24" 2.93ghz. And it's not performing aswell as my 7year old powerbook!!! First of all i used migration assistant to import all my user files > about 50gb of songs, photos, movies etc. This ended up taking nearly
-
CFM: change value date in OTC interest instruments
hello, in OTC transaction like: CAP, FLOOR, SWAP, FRA and etcetera. there is a possibility to change of the interest (for exmpale flow 1300) in transaction TO02. in transaction TO02 the system enable to change the 'amount" of the interest but don't l
-
well my ipod got int the washing machine and anyway it was all messed up the screen was all foggy and wet, but now the screen looks normal and all and now the sad face won't go away. And i've tried putting it into disk mode like they say to but it wo
-
Change the Data and Log file locations in livecache
Hi We have installed livecache in unix systems in the /sapdb mount directory where the installer have created sapdata and sapdblog directories. But the unix team has already created two mount direcotries as follows: /sapdb/LC1/lvcdata and /sapdb/LC1/
-
[SOLVED] Cannot install skype on Arch x86_64 system
Hello i am a newbie here and i am looking for you help ... here what i got after " sudo pacman -S skype" 1st attempt ============ sudo pacman -S skype resolving dependencies... warning: cannot resolve "lib32-alsa-lib", a dependency of "bin32-skype-st