Camera Raw box isn't coming up when exporting from LR to PS

IT USED TO WORK. I'M USING LR 4 AND PS CS5.1. They are both updated. I try right clicking on picture in LR and 'edit in PS' also try 'open as smart object'. Neither open the Camera Raw box in PS. The only way I can get Camera Raw in PS is if I open a RAW file directly from PS. Example: going to PS file menu - opening and selecting in box "caerma raw". The problem is then I don't get to save my LR updates. Also I just need to be able to send them from LR direct to PS. I've read all the forums and as such have tried all of the above. Any advice would be much appreciated. Thank you.

I can probably answer myself.... I overlooked the new "complete toning in Camera Raw" button!!!!!

Similar Messages

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available. I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual. Sadly I just get a message saying it's not compatible with the operating system. I've tried inserting the memory card into the mac to and it doesn't seem to see it. Can anyone help please?

Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
What happens when you try to import photos using Image Capture or iPhoto?
Can you take a screenshot of the error message?
I always prefer and recommend using memory card import over using the camera.

Where is the Properties Panel in the CS6 Camera Raw box ?

Where is the Properties Panel in the CS6 Camera Raw box (looking for Feather slider in that panel)?

I believe there is a Feather adjustment for both the Adjustment Brush and Effects in the 8.2 version for cs6.
Do you have camera raw 8.2?
Effects
Adjustment Brush

The utility's menu isn't coming up when I press and hold r and command after restarting

I have a Macbook air and The utility's menu isn't coming up when I press and hold r and command after restarting. I'm trying to restore my mac to factory settings. I have version 10.10.2 OS X Yosemite.

Then try:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches."

I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath that is "Lightroom will attempt to fix this problem the next time when it launches." It hasn't, what should I do? Thanks Shawn (Irish Se7en) .

Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?

Filename when exporting from ReportViewerBean

I'm using Crystal Reports for Eclipse 2.0 in a desktop application and ReportViewerBean is used for previewing reports. The export-dialog have several file formats and they all work fine but one annoying thing is that the filename is blank, so one have to write the filename/filextension manually before exporting to file.
Is there a way in the code to specify what filename a report should get when exporting?
I'm probably missing something here...
I've searched through the forums and code examples but have not found anything about this.
Thanks in advance
// Uhlen

To be clear, are you looking to have the Save As field in the export dialog box populated with a report name when you export the report?
When exporting from the viewer it isn't possible to do this, however if you export directly using the SDK, you can set the report name and path to whatever you like and automatically export to that location.

Saturation Loss When Exporting from Lightroom.

This happens to me when exporting from Lightroom 2 or 3. It happens regardless of the color profile, file format, bit depth, image size, compression, or the method of export. I regularly profile my one-year-old iMac monitor with an Eye One Display 2. My working color space for Photoshop CS4 is ProPhoto. After exporting, I am viewing the images in Photoshop, Safari, Firefox and Apple Preview, with the same result. I have used pretty much all the available export methods in Lightroom, including exporting with Lighroom ad-ons such as SlideshowPro. And, conversely, if I edit an image to my liking ourside of Lightroom, there is a saturation increase when I import it into Lightroom. The effect tends to be most obvious and bothersome with shots taken outside on sunny days, with lots of blues and greens. I am shooting raw files with a Canon 5d II and I use the Adobe Standard profile in Lightroom.
There is a section at the back of Martin Evening's Lightroom book where he talks about the Lightroom color space and Lightroom versus Photoshop curves, which seems to relate to what I am seeing, but I have the feeling that what I seeing is more pronounced than what he is talking about there. It is a real dullng of the look, not merely a slight difference in how the colors are rendered.

Looks like Lightroom doesn't like your display profile.
Try removing the profile (don't know how to do it on a Mac) to leave your display uncalibrated. Are the colors still different in Lightroom and Photoshop?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?

Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration. Why?
I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps. The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file. How can I get the exported movie to be slowed down?

joegez,
There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
Hope this solves the problem for you.

No audio when exporting from mpeg to flv

We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

How are you determining that the FLV has no audio? Are you playing it back in VLC Player or importing it into Flash?
Also, do you see a full range of formats on the system where you don't hear audio? If some formats are missing this might be a licensing issue. Also check if AME recognizes audio on the MPEG source (hover over it in the queue and look for audio info in the tool tip).

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

Media Encoder crashes when exporting from Premiere Pro

Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
Any idea why Media Encoder will crash?

Try turning off GPU acceleration.

Mac Projector Crashes When exported From Flash CS5.5

Something strange that i noticed, when i had exported a presentation for a Mac,
on a 64 bit windows 7 using flash cs5.5.
the applicaton gets the paths of a few swfs from an XML file
and loads them one after the other.. there is a small bit of interactivity.
.. tested this projecter on various versions of MAC, it crashes often,crashes earlier if i switch applications. what follows here is a part of a report that was generated on an OS X 10.7.3,
works fine if the projector is exported from flash cs5.
i need it to work when exported from flash cs5.5.. any suggestions on what i need to change in my application so that it works when exported from flash cs5.5?
Your help would be appreciated Thanks in Advance
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000500d98eb
VM Regions Near 0x500d98eb:
Memory tag=240         000000000ebd0000-000000000ec90000 [ 768K] ---/rwx SM=NUL
-->
__TEXT 0000000070000000-0000000070142000 [ 1288K] r-x/rwx SM=COW /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio
Application Specific Information:
objc_msgSend() selector name: orderOut:
objc[9434]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                 0x92115d47 objc_msgSend + 23
1   com.macromedia.Flash Player.app 0x00467d96 main + 240950
2   com.macromedia.Flash Player.app 0x0047efda main + 335738
3   com.macromedia.Flash Player.app 0x002feae2 0x1000 + 3136226
4   com.macromedia.Flash Player.app 0x0033a77b 0x1000 + 3381115
5   com.macromedia.Flash Player.app 0x00462718 main + 218808
6   com.macromedia.Flash Player.app 0x004628b2 main + 219218
7   com.apple.CoreFoundation        0x98e0b3df __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15
8   com.apple.CoreFoundation        0x98e0ad96 __CFRunLoopDoSources0 + 246
9   com.apple.CoreFoundation        0x98e34c68 __CFRunLoopRun + 1112
10 com.apple.CoreFoundation        0x98e3447c CFRunLoopRunSpecific + 332
11 com.apple.CoreFoundation        0x98e34328 CFRunLoopRunInMode + 120
12 com.apple.HIToolbox             0x9289117f RunCurrentEventLoopInMode + 318
13 com.apple.HIToolbox             0x928984e7 ReceiveNextEventCommon + 381
14 com.apple.HIToolbox             0x92898356 BlockUntilNextEventMatchingListInMode + 88
15 com.apple.AppKit                0x98fe8a9c _DPSNextEvent + 678
16 com.apple.AppKit                0x98fe8306 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
17 com.apple.AppKit                0x98fe4675 -[NSApplication run] + 911
18 com.apple.AppKit                0x99278261 NSApplicationMain + 1054
19 com.macromedia.Flash Player.app 0x000032a2 0x1000 + 8866
20 com.macromedia.Flash Player.app 0x000031c9 0x1000 + 8649
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib          0x97d3f90a kevent + 10
1   libdispatch.dylib               0x99a75c58 _dispatch_mgr_invoke + 969
2   libdispatch.dylib               0x99a746a7 _dispatch_mgr_thread + 53
Thread 2:
0   libsystem_kernel.dylib          0x97d3e83e __psynch_cvwait + 10
1   libsystem_c.dylib               0x9237ce78 _pthread_cond_wait + 914
2   libsystem_c.dylib               0x9232482a pthread_cond_wait + 48
3   com.macromedia.Flash Player.app 0x003ff62f 0x1000 + 4187695
4   com.macromedia.Flash Player.app 0x0001a06c 0x1000 + 102508
5   com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6   com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7   com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8   libsystem_c.dylib               0x92378ed9 _pthread_start + 335
9   libsystem_c.dylib               0x9237c6de thread_start + 34
Thread 3:
0   libsystem_kernel.dylib          0x97d3e83e __psynch_cvwait + 10
1   libsystem_c.dylib               0x9237ce78 _pthread_cond_wait + 914
2   libsystem_c.dylib               0x9232482a pthread_cond_wait + 48
3   com.macromedia.Flash Player.app 0x003ff62f 0x1000 + 4187695
4   com.macromedia.Flash Player.app 0x0001a06c 0x1000 + 102508
5   com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6   com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7   com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8   libsystem_c.dylib               0x92378ed9 _pthread_start + 335
9   libsystem_c.dylib               0x9237c6de thread_start + 34
Thread 4:
0   libsystem_kernel.dylib          0x97d3e83e __psynch_cvwait + 10
1   libsystem_c.dylib               0x9237ce78 _pthread_cond_wait + 914
2   libsystem_c.dylib               0x9237cf7b pthread_cond_timedwait_relative_np + 47
3   com.macromedia.Flash Player.app 0x003ff5f8 0x1000 + 4187640
4   com.macromedia.Flash Player.app 0x001c58fe 0x1000 + 1853694
5   com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6   com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7   com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8   libsystem_c.dylib               0x92378ed9 _pthread_start + 335
9   libsystem_c.dylib               0x9237c6de thread_start + 34
Thread 5:
0   libsystem_kernel.dylib          0x97d3e83e __psynch_cvwait + 10
1   libsystem_c.dylib               0x9237ce78 _pthread_cond_wait + 914
2   libsystem_c.dylib               0x9237cf7b pthread_cond_timedwait_relative_np + 47
3   com.macromedia.Flash Player.app 0x003ff5f8 0x1000 + 4187640
4   com.macromedia.Flash Player.app 0x00305328 0x1000 + 3162920
5   com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6   com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7   com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8   libsystem_c.dylib               0x92378ed9 _pthread_start + 335
9   libsystem_c.dylib               0x9237c6de thread_start + 34
Thread 6:: com.apple.audio.IOThread.client
0   libsystem_kernel.dylib          0x97d3cc22 mach_msg_trap + 10
1   libsystem_kernel.dylib          0x97d3c1f6 mach_msg + 70
2   com.apple.audio.CoreAudio       0x9cd8e9fe HALB_MachPort::SendMessageWithReply(unsigned int, unsigned int, unsigned long, unsigned long, mach_msg_header_t*, unsigned int) + 122
3   com.apple.audio.CoreAudio       0x9cd8ea6a HALB_MachPort::SendSimpleMessageWithSimpleReply(unsigned int, unsigned int, int, int&, unsigned int) + 60
4   com.apple.audio.CoreAudio       0x9cd86e5f HALC_ProxyIOContext::IOWorkLoop() + 1145
5   com.apple.audio.CoreAudio       0x9cd86926 HALC_ProxyIOContext::IOThreadEntry(void*) + 136
6   com.apple.audio.CoreAudio       0x9cd86898 __HALC_ProxyIOContext_block_invoke_6 + 20
7   com.apple.audio.CoreAudio       0x9cd8681d HALB_IOThread::Entry(void*) + 69
8   libsystem_c.dylib               0x92378ed9 _pthread_start + 335
9   libsystem_c.dylib               0x9237c6de thread_start + 34
Thread 7:
0   libsystem_kernel.dylib          0x97d3f02e __workq_kernreturn + 10
1   libsystem_c.dylib               0x9237accf _pthread_wqthread + 773
2   libsystem_c.dylib               0x9237c6fe start_wqthread + 30
Thread 8:
0   libsystem_kernel.dylib          0x97d3f02e __workq_kernreturn + 10
1   libsystem_c.dylib               0x9237accf _pthread_wqthread + 773
2   libsystem_c.dylib               0x9237c6fe start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00dbe0e0 ebx: 0x00dbe0e0 ecx: 0x99985548 edx: 0x500d98cb
edi: 0x0000036e esi: 0x00aad0e0 ebp: 0xbfffe4f8 esp: 0xbfffe488
ss: 0x00000023 efl: 0x00010202 eip: 0x92115d47   cs: 0x0000001b
ds: 0x00000023   es: 0x00000023   fs: 0x00000000   gs: 0x0000000f
cr2: 0x500d98eb
Logical CPU: 1

Looks like it was a memory problem with the jvm.ini file.
Pumped it up to 256 and it works now.
Hope this helps anyone else in the future if they come across it.
Thanks.

"Milky" or faint results when exporting from AE to FCP

(Accidently posted to FCP Express forum-- whoops!)
I've been using After Effects for years now to create graphics for our Avid projects, and the QT results have always been great. Clean, sharp moving graphics. But now that I've been using FCP, I'm not exactly happy when I export my Quicktime graphics from After Effects to FCP: they're extremely "milky" and faint/fuzzy when viewed from FCP over an NTSC monitor. I have tried various codecs when exporting: DV/NTSC, Animation, Component-- all with the same results.
I have read other threads with similar comments (even the thread that mentioned "milky" results when exporting from FCP to AE and back) but none of the suggestions/remarks helped in my situation.
I'm sure others have experienced this. Any suggestions?
Settings:
After Effects comp: NTSC/DV Preset (720 x 480, lower field, etc.)
Export Codecs: DV/DVCPro-NTSC, Animation, Component (all with the same milky results)
Final Cut: Sequence Preset "DV/NTSC 48 Khz"
Also tried using, as one thread suggested, the "Uncompressed 8 bit NTSC 48 Khz" preset and no difference
Side note: I'm using Final Cut in this system outputting to both DV video and Betacam video, using an Aja card for the Beta. Both DV and Beta results look the same (going straight thru the decks-to-NTSC monitor) and they both use the same "DV/NTSC 48 Khz" sequence preset-- except where I changed it to "Uncompressed 8 bit". If I use Animation or Component as my export codec from AE, naturally, I have to render to play the clip back in the timeline. It even looks milky or faint on the FCP source/viewer screens!
And yes, I've checked the NTSC monitor-- a Sony Trinitron PVM-20 monitor. And I've looked at the results on other monitors and even regular TVs. Milky/faint video all around.
Any suggestions would be appreciated!!

Is this on files with alpha channels? Have you tried
changing the Alpha type? Are you having
pre-multiplication problems?
No, they don't have alpha channels. But I did try, when rendering with Animation, changing the colors to "Millions +" which was something I read on another thread. Same results.
Basically, these are After Effects projects with simple backgrounds and moving text. I'm not doing any layering with alpha channels-- like lower third supers.
However, whenever I use Apple programs like LiveType or Motion, the NTSC results look like they did while I was creating the projects with these programs before I rendered them.

"Milky" Results When Exporting from AE to FCP

I've been using After Effects for years now to create graphics for our Avid projects, which have always been great! Now that we're using FCP, I'm not exactly happy with the results of my QT graphics exported from After Effects to FCP: they're extremely "milky" and faint when viewed from FCP over an NTSC monitor. I have tried various codecs when exporting: DV/NTSC, Animation, Component-- all with the same results.
I have read other threads with similar comments (even the thread that mentioned "milky" results when exporting from FCP to AE and back) but none of the suggestions/remarks helped in my situation.
I'm sure others have experienced this. Any suggestions?
Settings:
After Effects comp: NTSC/DV Preset (720 x 480, lower field, etc.)
Export Codecs: DV/DVCPro-NTSC, Animation, Component (same milky results)
Final Cut: Sequence Preset DV/NTSC 48 Khz
Also tried using, as one thread suggested, the "Uncompressed 8 bit NTSC 48 Khz" preset and nothing better
Side note: I'm using Final Cut in this system with both DV video and Betacam, using an Aja card. Both DV and Beta results look the same (going straight thru the decks-to-NTSC monitor).
And yes, I've checked the NTSC monitor-- a Sony Trinitron PVM-20 monitor. And I've looked at the results on other monitors and even regular TVs. Milky faint video all around.
Any suggestions would be appreciated!!

You might want to post this in the FCP forum next door; this for Final Cut Express

Formatting of text fields when exporting from InDesign to Acrobat Pro

How does one preserve the formatting of a text field when exporting from InDesign CS6 to Acrobat Pro? It loses both the font and the alignment formatting in the PDF.

Use a font that allows embedding/ check the font embedding settings in the PDF output settings.
Mylenium

Camera Raw box isn't coming up when exporting from LR to PS

Similar Messages

Maybe you are looking for