Camera Raw CS6 produces damaged files when doing greyscale conversion

When attempting to save to JPEG from CS6 Camera Raw for Nikon NEF files (with the greyscale conversion checkbox checked), the resulting images are damaged: red hue output with scattered noise. See:
https://picasaweb.google.com/lh/photo/duJSMbdMd5VZLSQQy46hXb4WSo7wDW7hk8bkMgDW8HE?feat=dir ectlink
This has been observed on D90 and D600 NEF files, CS6 trial installation.  Exporting the image to Photoshop main works, but is laborious for bulk conversions.
Is this a known bug?

theuns.verwoerd wrote:
Is this a known bug?
Yes, known issue...will be fixed. In the meantime the workaround is to process the images as sRGB (gamma 2.2) or ProPhoto RGB (gamma 1.8) and convert to grayscale in Photoshop.

Similar Messages

  • Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

    Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get photoshop error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Bridge at all.  What am I doing wrong?

    Camera Raw plug-in | Supported cameras

  • Pls help. My Camera Raw, CS6 and Lightroom won't read the NEF files from D610.

    I recently upgraded to Nikon D610 and the NEF files were not readable from my old version of Camera Raw, CS6 and Lightroom. So downloaded the recommended upgrades and I now have Camera Raw 8.4.0.199; Lightroom 5.3; CS6 13.01. But still did not read my D610 NEF's. Please help. Thanks.

    oh wait, i got it. Just in case for those who will have the same scenario. I downloaded the NEF files from my D610 using the old ViewNX 2.1 software and that was the cause of incompatibility. So i upgraded my ViewNX to 2.9 and downloaded my images again. And it worked this time.

  • Installed camera raw, but still nef files on bridge and not opening on cs6

    installed camera raw, but still new files on bridge and not opening on cs6

    d600
    On Wed, Apr 22, 2015 at 2:23 PM, John Waller <[email protected]>

  • Camera-raw plugin for NEF files, made with the new Nikon D7200

    Hi, does anyone know when there will be a camera-raw plugin for NEF files made with the new Nikon D7200?

    I think that camera is too new. Even the DNG converter will not support it. If you have Nikon software with the camera, you could convert to tiff and then use the tiff files in Elements whilst awaiting the next Camera Raw update for PSE13.

  • Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW

    Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW - PS 6

    Sorry I'm taking to along, but I checked a few things using ACR 8.6
    Saved a png as an 8 bit tiff, then to 16 bit. Changed the background layer into a floating layer, all opened in ACR.
    It was when I added an adjustment layer, that it no longer opened in ACR.
    Now what can I recommend? If you have Lightroom, you can Import and work on your layered tiffs that way. I hope this is a viable alternative for you, because I think ACR does have a problem with layered tiffs and I don't really know of any workaround, but you are free to explore.
    Gene

  • Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW What is the problem?

    Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW. How can I correct the problem?

    What kind of TIFFs?  Are they multi-layered, for instance?  ACR will not open layered files.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Camera Raw CS6 not working properly

    I have upagraded from Ps Cs5 to CS6.
    I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
    After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
    Some body can help me ?
    I work with the last version of Br and Ps CS6.
    Thanks,
    Michel,   [email protected]

    Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
    Salutations and many thanks from Guadeloupe, French West Indies
    Michel GOGNY-GOUBERT
    Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
    Re: Camera Raw CS6 not working properly
    created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
    If you have Nik plugins installed, please check reply # 8 on this thread:
    http://forums.adobe.com/message/6045415#6045415
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Camera Raw at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

    Can you describe what “the operation is failing” means?  What is happening and how is it different than what you expect?
    Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

  • Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Camera raw filter keeps adding sharpening when I  open the image

    camera raw filter keeps adding sharpening when I  open the image although there are no presets and all sharpening sliders set to zero- this doesn't happen with the same set up on my imac- Ps cc 2014 osx 10.9.5- can anyone help me turn this off, I've reloaded  and update the Ps cc 2014

    Thanks for the reply - the problem isn't with ACR itself but the new Camera Raw filter available in photoshop CC 2014 in the filters selection, this doesn't seem to include the workflow options that you get at the bottom of the normal ACR window-  it's a really handy filter for quick final adjustments but on my Macbook keeps adding sharpening even when the sliders are at zero. Is there a workflow option menu for this filter ? Something strange going on somewhere- thanks again for the reply , Tom

  • Why do I get corrupted JPEGs when saving images in Camera Raw, CS6, Mac 0S Mavericks

    I occasionally get corrupted JPEG files when processing RAW files in Camera Raw. The images will have lines of pixels that ar out of line, and or whole sections will be truncated and show white or black. I'm using PS CS6, Camera Raw 8.6 on a Mac with OSx Mavericks. Not sure, but it might have something to do with the Bridge Cache, which also acts up when it's getting full. Anyone else have this problem, or any advice.
    Thanks!

    right click on the jpeg (the other mouse button then you use to click with) or on trackpad, hold down control and click, in the menu that pops up, click on "get info" next, if the box labeled "locked" is checked, uncheck it. Down at the bottom, there should be a box with your user name, "staff" and "everyone". to the right of this are options to change these you may need to click the small padlock icon and enter in your password. then change all of the permissions to read and write.

  • Why Does Photoshop cs5 Camera RAW not open CRW files

    I need help bad.I am running Windows XP Pro.I had to get Adobe help to install a update to photoshop to get it to open.That part is working.Yesterday I tried to go thru some of my CRW Raw negatives,They will not open in camera raw or bridge or mini bridge.When I try to open it in Photoshop cs5, a box pops up that says "Could not complete your request because it is not the right kind of document.My CRW RAW Negatives are stored on CD-R Disks.So Itried to open them in photoshop CS2 and they opened.If no one knows how to fix this problem there is an Adobe site where you can chat with a tech. online but I forgot how to find it.Does anyone know the site I am talking about?....Thanks.

    What size does the properties dialog show for the 6.7 camera raw plugin?
    Adobe keeps changing the support pages around, so you might try one of these two:
    http://helpx.adobe.com/contact.html
    http://www.adobe.com/company/contact.html?promoid=JZEGC
    Also, maybe someone has some other ideas in the camera raw forum:
    http://forums.adobe.com/community/cameraraw

  • I am having trouble opening raw files in camera raw cs6

    In the file menu, open in camera raw is not highlighted.  If I double click on the photo, it opens in the raw converter.

    Using the "original" setting is the correct way to do it.  Select on of the photos and use the File ➙ Reveal in Finder ➙ Original menu option.  That will take you to the file inside the library via the Finder.  Confirm that what you see if the raw file.
    If it is then try the following:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • Does Elements 11 Camera RAW support Nikon D4 files?

    Does the Camera RAW tool that comes with Elements version 11 support editing Nikon D4 RAW files?  Thanks.

    I cannot verify it personally, but PSE11 ships with ACR 7.1 and the readme for ACR 7.1 says it newly supports the D4:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5391

Maybe you are looking for