Camera Raw dnload for Photoshop CS

I work in Photoshop CS and recently downloaded the versions of Camera Raw 2.1 to 2.3. (The latest version of Camera Raw is 3.3. which is only compatible with PS CS2). Though I exchanged the Plug-Ins as advised, the results in PS are the same as before. Any advise?
eMac   Mac OS X (10.3.9)  

robraws wrote:
Where do you find DNG converter version 5.2?
The Adobe DNG Converter version 5.2 is obsolete by now.
At this point, you want the Adobe DNG Converter version 5.3, available here:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4369
Incidentally, your question does not fit in a thread titled "Camera Raw plugin for Adobe CS' in Adobe Camera Raw".  You should have started your own thread instead of hijacking this one, where your question could have remained buried. Please keep that in mind next time.
Please read this post by a forum host for advice on how to ask your questions correctly for quicker and better answers: 
http://forums.adobe.com/thread/375816?tstart=0
Thanks!

Similar Messages

  • Adobe Camera Raw plugin for Photoshop 7

    Is it still possible to purchase the Adobe Camera Raw plugin for Photoshop 7?
    If so, can the plugin read *.raw files from an Olympus C-8080?

    HI mattscreative,
    Yes I've installed that but that imports .orf files and my camera saves .raw files.
    Thanks,
    Mike
    Date: Wed, 12 Oct 2011 23:26:25 -0600
    From: [email protected]
    To: [email protected]
    Subject: Adobe Camera Raw plugin for Photoshop 7
        Re: Adobe Camera Raw plugin for Photoshop 7
        created by mattscreative in Photoshop Windows - View the full discussion
    Have you tried using the software for your camera? Looks like Olympus has one available for PS 6.0 and up. C-8080 Software:
    http://www.olympusamerica.com/cpg_section/software_results.asp?id=961& os=w Instructions:http://www.olympusamerica.com/files/oima_cckb/Rawplugin_instr.pdf
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3968685#3968685
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3968685#3968685. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Windows by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to install Camera RAW update for Photoshop CS3?

    I know this is an ancient version! But for now it's all I need. Anyway...
    My Adobe Updater says "No Internet connection.  Please check your Internet settings and/or firewall.  Waiting for connection..." That's the first problem.  I figured out how to manually update Photoshop and Bridge, but Adobe Updater still shows this message when trying to check for updates.  Also, I've tried to update Camera Raw from 4.0 to 4.6 and I can't figure out how to manually install it.  I knkow the website says to do the following:
    Mac:
    Exit Photoshop CS3 and Adobe Bridge.
    Open the Finder.
    Navigate to the root of the local disk (not the user’s home folder).
    Navigate to Library/Application Support/Adobe/Plug-Ins/CS3/File Formats.
    Move the existing plug-in to another location (for example, a new folder on your desktop). Ensureyou keep this version in case you need to revert back.
    Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4.
    Launch Photoshop CS3 or Adobe Bridge.
    I manually entered "Library/Application Support/Adobe/Plug-Ins/CS3/File Formats" and it says this folder doesn't exist.  Can anyone help me update my camera raw?!
    Thank you so much!

    Adobe - Photoshop : For Macintosh
    Version CS3
    Camera Raw 4.6 update
    8.4MB
    10/10/2008
    Download Adobe - Photoshop : For Macintosh : Camera Raw 4.6 update : Thank You
    Mac:
    1. Exit Photoshop CS3 and Adobe Bridge.
    2. Open the Finder.
    3. Navigate to the root of the local disk (not the user’s home folder).
    4. Navigate to Library/Application Support/Adobe/Plug-Ins/CS3/File Formats.
    5. Move the existing plug-in to another location (for example, a new folder on your desktop). Ensure
    you keep this version in case you need to revert back.
    6. Copy the Camera Raw plug-in, Camera Raw, from the download into the same folder as in Step 4.
    7. Launch Photoshop CS3 or Adobe Bridge.

  • Adobe Camera Raw Plugin for Photoshop Elements 4

    I have downloaded the latest Raw Plugin for Elements 4 successfully and have gone through all the steps except i havent installed Raw Plugin as yet, i would like to know if i have to unzip the files in the downloaded Plugin before i install into Elements 4 or install as is and unzip when it's installed into Elements 4 ? Many thanks Lloyd fro OZ

    In order to use the new plugin in Photoshop Elements 4, you will need to run the 4.0.1 Updater. Support for this version of ACR is the ONLY feature of the 4.0.1 updater.
    Unfortunately, the new ACR plugin came out before we could get the PSE 4.0.1 updater out, so we need to do a workaround for the time being.
    Until the Updater gets posted (which we expect to be on or before May 20), you can use the converter to convert your Panasonic Lumix DMC-FZ8 files to RAW, then use them in the program.
    The Converter can be found at: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3604
    Sorry for the delay between the ACR posting and the PSE Mac updater posting.
    -Mark

  • Camera raw conversion for photoshop elements 12 . Camera Nikon D4S

    Hi i have an apple Mac version 10.9 os.  I have Adobe photoshop Elements 12.  I just got a new camera Nikon D4S.  Photoshop Elements will not import my RAW phots (NEF) taken with the new D4S camera.  It gives me a message: Could not complete request because the file appears to be from a camera model which is not supported by the Camera Raw installed version.  I uploaded a plug in 8.4 to my computer. Then tried to convert the photos in the D4S file folder. It would not convert the photos. The message from the DNG plugin said:  The Source folder does not contain any supported camera raw files.  How can I upload the RAW (NEF) photos taken with the D4S to photoshop elements 12?  Need help as I need to edit all these pictures.
    I am having the same issue uploading the RAW (NEF) D4S photos into Adobe Lightroom 5 as well.
    Thus I can not edit any of these photos.  I am very frustrated and could not find or locate a phone number to contact Adobe Elements for assistance, so if you have a phone number or email address for Adobe Photoshop Elements support or Adobe Lightroom support, please let me know.
    thank you

    Adobe - Adobe Application Manager : For Windows
    Adobe - Adobe Application Manager : For Mac
    Anything else requires more information on your part. We do not know anything about your operating system nor the exact error message(s).
    Mylenium

  • Camera raw plugin for photoshop 5.5 (windows) not updating

    Hi, I'm trying to update the camera raw plugin (min 8.2) in photoshop 5.5 for windows. I downloaded, ran, installed camera raw plugin 8.6 and rebooted. The installation wizard shows as installed but when I open photoshop it still has camera raw 6.7.0.339. Please help!! (The dng converter works but the camera raw plugin has not been updated)

    That may be because the latest version of ACR that works with CS5 is ACR 6.7
    Adobe - Photoshop : For Windows
    Adobe - Photoshop : For Macintosh
    You can install ACR 8.7.1 in CS6 to get new Camera support without ACR new features
    Photoshop Help | Camera Raw

  • Camera Raw Update for Photoshop CS3 on Mac 10.5.8

    I've downloaded the camera raw plugin version 4.1 because I'd like to take advantage of the clarity slider, but when I try to open it, photoshop gives me a message that the file type isn't recognized. What am I doing wrong?

    station_two wrote:
    Thanks ssprengel.  What threw me off was the capitalization of "Naff".  I thought it was the name of some software developer. 
    There are one or two for whom the name would sit all too well.  I think naff is used fairly universally in the UK.  My wife comes from oop north, (Cheshire) and I've had to learn a whole new language since meeting her.
    station_two wrote:
    Some of my comments on that issue were removed by admin a while back as too insulting and condescending towards those team members, but the fact remains that even Adobe engineers and managers are known to vent their frustration, in public and in private correspondence, about how poorly those people perform and what they (Adobe senior staff) would like to do to their necks.
    I hope you are not in line for an incremental change of user name — it could get way too confusing.   I vote that you should be able to return to your original user name, which had a proud and distinctive sound to it.  Either that or sound like a baddy in the old Bonanza TV show. 

  • How to install camera raw plugin for photoshop cs6? I already updated it but I'm unable to get it in my filters ., how to install camera raw plugin for photoshop cs6? I already updated it but I'm unable to get it in my filters . how do I get rid of it?

    hi guys two days later I installed photoshop cs6 and updated my camera raw plugin but i was unable to see that plugin in my filters. pls any one help me to get rid of that ................

    Good day!
    If you are talking about the Camera Raw Filter that was introduced in Photoshop CC, if I remember correctly.
    Regards,
    Pfaffenbichler

  • What camera raw plugin for Photoshop CS2 + Canon Rebel T21

    I still have the excellent Photoshop CS2 and bought a Canon EOS Rebel T2i. However, the raw files come up in Bridge without picture preview. The file is a CR2 file. When double-clicked, Photoshop 2 opens and gives error dialog:
    "Could not complete request because not right kind of document."
      I see that version 5.7 and 6.1 of Adobe Camera Raw Plug in are compatible with this camera. Can I use either plug in with Photoshop 2?

    Congratulations on your decision to move up to Photoshop CS5.  It's a good product.
    I'm not sure exactly what you mean by your question, though...
    In my own case, I have .CR2 files associated with a program called Irfan View so that when I double click a .CR2 file it opens immediately in this very fast image viewer program.  All .CR2 files have embedded JPEG previews, and I can view these embedded JPEGs from my raw files instantaneously with Irfan View.
    While using Explorer, if I want to open an image file with Photoshop (i.e., to do an actual raw conversion), I either drag the file and drop it on a desktop Photoshop icon -or- I right-click the file and choose Open With - Adobe Photoshop CS5.
    Multiple versions of Photoshop will live happily side by side on the same system.  You just can only run one of them at a time.
    Most folks recommend leaving older versions of Photoshop installed.  This allows you access to the version you're familiar with so that you can go back and check settings, save actions, etc. and it does provide you a backup editor if something should go wrong with the new one.
    Assuming you have the disk space, you never really need to uninstall an older version of Photoshop, and in fact uninstalling Photoshop after installing a newer version is reported to cause problems in some cases.
    -Noel

  • Having trouble opening camera raw files. Already downloaded Camera Raw Update for Photoshop CS5. I have a pc.

    Please Help? Having trouble opening camera raw files. Already downloaded Camera Raw update. I have a pc.

    If the camera is fairly new then the version of ACR you have with CS5 won't be able to read those file. You'll need to upgrade to a newer version of Photoshop or use Lightroom 5.
    Once a new version of Photoshop comes out Adobe does not support updating ACR from the older version of PS.

  • Camera raw update (for Photoshop 6)

    I am having trouble updating Camera raw so it is compatable with  5d machiii  updated and gave me errors
    Help!!

    Photoshop 6.    The update stated that there were errors  upon retrying it says no new updates available. So  I manually downloaded the update 6.7(the one that allows me to open 5d mach iii raw files)  however the adobe patch still says update complete and wont reload.  I want to unistall my photoshop and reinstall and re update  but I fear it wont  let me reinstall photoshop 6 with my disc since it is already on the hard drive.  (I am afraid I wont have photoshop at all , at this point I can edit the jpg)

  • Can't download a patch for Camera raw files for Photoshop Elements 9.

    Can't open RAW files from a Canon 60D camera on Photoshop Elements 9. Went online and suggested solution is to download a patch for PE9, which has been done. Tried to open program and message says Adobe Application manager download required. This done, and back to opening patch for PE9. Message says AAM failed, please download new version (hey, already been there). Going round in circles again. Does anyone non geek check these things. Please help!!!

    Adobe - Adobe Application Manager : For Windows
    Adobe - Adobe Application Manager : For Mac
    Anything else requires more information on your part. We do not know anything about your operating system nor the exact error message(s).
    Mylenium

  • Camera Raw Filter for Photoshop 6

    I for one like the Raw Filter adjuster with Photoshop 5 better than the one with Photoshop 6...there are more choices for one for adjusting the picture. I like them better than the white and black slides in Photoshop 6 raw filter. I hope the filter is not the finished product in 6. Does anyone else feel this way?

    FatherJacob wrote:
    I for one like the Raw Filter adjuster with Photoshop 5 better...
    Does anyone else feel this way?
    Nope, I'm afraid I can't agree with you there, FatherJacob.
    Work with the new PV2012 controls for a while (I'm assuming you haven't). 
    I predict you'll be doing a flipflop.  It's sometimes difficult to make a transition into using something slightly different, but once you do and find you're making better images than you've ever made before (as I have, and apparently Howard has), I think you'll be convinced.
    -Noel

  • Looking for the camera raw plugin for Nikon d3100

    Hello!
    I'm familiar with how to install a camera raw plugin for photoshop.  However, I've had a difficult time finding the correct download link for the Nikon d3100 for ps cs4.  Will you please point me in the right direction with a link or otherwise?  Thanks so much!

    ACR - Adobe Camera Raw versions are specific to the version of Photoshop you have.
    They don't provide updates to your version for cameras that were released much later.
    You need to download the LATEST version of DNR Converter and use this to convert a FOLDER that contains your D3100 files to DNGs which then can be opened in your older version of ACR for Photoshop CS4.
    The Adobe DNG Converter, a free utility that converts files from more than 350 cameras to DNG, enables you to easily convert camera-specific raw files to a more universal DNG raw file.
    Adobe DNG Converter for Mac OS
    Adobe DNG Converter for Windows

  • Adobe camera raw plugin for Premiere Pro

    Check out this article, I just tried and it'd be magic if you could use this in premiere natively! Sending a feature request right now!
    Adobe's Camera RAW Plugin Can Color Correct Your Video, & It Does an Amazing Job

    HI mattscreative,
    Yes I've installed that but that imports .orf files and my camera saves .raw files.
    Thanks,
    Mike
    Date: Wed, 12 Oct 2011 23:26:25 -0600
    From: [email protected]
    To: [email protected]
    Subject: Adobe Camera Raw plugin for Photoshop 7
        Re: Adobe Camera Raw plugin for Photoshop 7
        created by mattscreative in Photoshop Windows - View the full discussion
    Have you tried using the software for your camera? Looks like Olympus has one available for PS 6.0 and up. C-8080 Software:
    http://www.olympusamerica.com/cpg_section/software_results.asp?id=961& os=w Instructions:http://www.olympusamerica.com/files/oima_cckb/Rawplugin_instr.pdf
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3968685#3968685
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3968685#3968685. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Windows by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • How to Extract the Hierarchy Set from R/3 into BW

    Hi all,      A Hierarchy Set Z_XX has been created for 0STKEYFIG InfoObject with the   following details in R/3 for :      Table: CCSS      Field:  STAGR (Statistical Key Figure).   I have tried to Refresh the Hierarchies with ' Available Hierarchies

  • Disk Utility won't quit?

    The Time Machine partition on my external hard drive won't mount. Tried using Disk Utility but it's stuck. Am guessing the external is damaged, but I can't exit utility and am afraid of damaging stuff more. Here's what it's stuck in.

  • How to disable the annoying two fingers zoom?

    Hi, I bought an ubibody macbook pro 13.3". When I use firefox, the 'track pad two fingers zoom' is triggered every time I put 2 fingers accidentally. Is there an easy way to disable it? Thanks

  • I use to be able to edit with Quicktime but not it's gone!!

    My friend bought me Final Cut Pro 5 studio, so we installed it then next thing you know my Quicktime no longer had the editing options. It just said I need to update quicktime in order to install Final Cut, so I updated it, then boom no more Quicktim

  • Material Ledger Valuation

    Is it possible to have 2 or more standard prices for a single material e.g. one price for imported material and one for in-house produced material. If it is possible then what will be the effect of this when material ledger is activated?