Camera Raw + Elements 7 + Windows 7 64-bit

I'm trying to get Elements 7 working on Windows 7 Camera RAW 5.5 or 5.4 won't work with Elements on Windows 7. CR 4.5 that is installed by default with Elements 7 works fine, but if I copy the 8BI from 5.4 or 5.5, Elements behaves as if Camera Raw wasn't installed (isn't on the plug-in list and won't open RAW files). I'm searching for previous versions of CR (Adobe doesn't host old versions apparently), but has any other Windows 7 user found a newer version than CR 4.5 that works in Windows 7 with Elements 7?

From what you have said, I see nothing that indicates the problem is Windows 7. In other words, you haven't convinced me from your description that Windows 7 is indeed the problem.
In particular, you don't simply paste the new .8bi file into the folder. You have to delete the old file first. Adobe's instructions are very clear about this. Deleting then pasting is not the same as pasting, according to the people who have studied this carefully. Renaming the old plugin, leaving it in place, doesn't work either. Nor does moving the old plugin to a subfolder of File Formats work.
Move the existing File Formats folder to somewhere else, not to a subfolder. Then, please try creating a new File Formats folder. Then, you can indeed paste the ACR plug-in and expect to have it work.

Similar Messages

Trying to upgrade Camera Raw- Elements file agent won't allow

While trying to upgrade Camera Raw, Elements 5.0 has an error message that says to turnoff Elements 5.0 File agent. I cannot find this anywhere. I use CS3 and Elements 5.0 but cannot upgrade to the new camera raw. Any one know how to shut off Photoshop Elements 5.0 file agent.exe ???
Thanks.

The file PhotoshopElementsFileAgent.exe is located in C:\Program
Files\Adobe\Photoshop Elements 5.0. It may be on the list of Windows XP
Services. Possibly also listed as Adobe Active File Monitor or Adobe Active
File Monitor V5. Set any and all of these services to 'Disabled'.
Additionally, it is a good idea to go to Elements Organizer preferences and
uncheck 'Automatically check for Services' and also uncheck 'Auto Launch
Adobe File Downloader on Device Connect'.
And, yes, ACR 4.3.1 should be manually installed. As a matter of fact, turn
off the automatic updater service, too (in >Help).
Juergen

Premier Elements 12, windows 7 64 bit pro

When editing, half way through my program, when DTI is moved when I make a cut, the video on the time line that is visible does not change.
I quiet and started again, and the same happened when I was half way through my program
[email protected]

I have three cameras. I add three videos to the time line. One on top of
the other. I change cameras after about 40 seconds.
I am not using a switcher and thanks to adobe, I have no need for that.
I have been using Adobe since Premier Elements 9. Normally I have no
problem. Yesterday this started. It is strange.
I will try to burn a disk and see if it comes out right, if not then I
will try another video. Maybe that will make a difference.
I doubt that would make a difference. My you have an opinion???
Thanks again
Jim
>
Re: Premier Elements 12, windows 7 64 bit pro
created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in
/Premiere Elements/ - View the full discussion
<http://forums.adobe.com/message/6133467#6133467

Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Is camera raw beta 5.4 for 64 bit machines only (PC)?

That is was it seems to be saying when I try and install. If I ignore it and proceed it tells me to close Adobe Bridge, but it's not running.
Hmm!

Thank you for your advice, as you say it was active in the processes. It
has installed OK and works.
General Enquiries: 020 8731 3250
Technical Enquiries: 020 8731 3255
Service and Repair: 020 8731 3270
Sales Enquiries: 020 8731 3260
www.hasselblad.co.uk
This E-mail is from Hasselblad (UK) Limited.
Hasselblad (UK) Limited, is a company registered in England with the
company registration number 1889609. Registered Office: 385 Centennial
Ave, Centennial Park, Elstree, Hertfordshire, WD6 3TJ.
This email and any files transmitted with it are confidential, subject to
copyright, may be subject to legal privilege and are intended solely for
the use of the individual or entity to whom they are addressed.
Any unauthorised dissemination or copying of this email or its
attachments, and any use or disclosure of any information contained in
them, is strictly prohibited and may be illegal. If you have received the
email in error, please notify us immediately by reply email (and delete
the email and any attachments from your system), or telephone +44 (0)20
8731 3250. Any views or opinions expressed by an individual within this
email, does not necessarily reflect the opinions or views of Hasselblad
(UK) Limited.
Internet communications including emails and access and use of web sites
cannot be guaranteed to be secure or error free as information can be
intercepted, corrupted, lost or arrive late. Furthermore, while Hasselblad
(UK) Limited has taken steps to control the spread of viruses on its
systems, it cannot guarantee that this email and any files transmitted
with it are virus free. No liability is accepted for any errors,
omissions, interceptions, corrupted mail, lost communications or late
delivery arising as a result of receiving this message via the Internet or
for any virus that may be contained in it.
From:
ssprengel <[email protected]>
To:
Douglas Fairbank <[email protected]>
Date:
22/05/2009 15:32
Subject:
Is camera raw beta 5.4 for 64 bit machines only (PC)?
Have you checked the Proesses list in TaskManager to see if Bridge.exe is
actually running, invisibly?

Adobe Camera RAW 6.7 Windows 7 Crashing etc...

Good Afternoon,
We are using Adobe Camera RAW 6.7 on Windows 7 32bit devices. We have had reports that it seems to be unstable and crashes or that they loose the view window and have to restart it to get it back.
There also seems to be no way of viewing RAW files prior to opening them in the RAW plugin, making the process a bit hit and miss. They should be able to open the files containing the RAW files, in the Bridge and preview before editing them in Photoshop. A temporary but not really usable workarround is that they open them through Photoshop, which gives you a postage stamp size preview, which is not really very usefull.
Has anyone come accross this before in this version of RAW and discovered a fix for it?
Any advice is much appreciated.
Regards
Jo

Hi Eric,
Sorry for the delay in getting back to you, the two camera types are:
Cannon PowerShot G1X
Cannon 5D Mark 3
The user has advised this version of Camera Raw and the same camera models were used on XP it is just since the upgrade to Win 7 - is there any known compatibility issues with this version of RAW with Win7?
Thanks
Jo

Camera Raw only offers to open 16-bit raw files in 8-bit mode

I am using a windows CS6 Bridge => Camera Raw (8.2) => CS6 Photoshop (13.0.1 x64) to try to open various 16-bit raw files (.dng, .nef, .arw) which Bridge sees as 16-bit, but only an 8-bit version makes it into photoshop.
How do I convince Camera Raw to do its job?
Lightroom (4.4) is able to export a 16-bit .psd which sort-of-works but shouldn't be necessary.
Thanks in advance,
Steve

You set the bitdepth in your work options dialog box, which you access by clicking on the line that looks like a link right under the ACR preview:
Don't be afraid to read the Help files or other documentation that came with Photoshop (otherwise known as Read The Fine Manual).

Camera Raw 4.5 Error and 64-Bit crash

When I choose edit in photoshop or merge to HDR in photoshop Lightroom erros with:
"Photoshop should be using Camera Raw 4.5 update using....."
I have Photoshop 10.0.1 and it is running Camera Raw 4.5
Also I when I choose 64 bit as the lightroom run option, it will show me the Lightroom spash screen and the backup/test integrity screen then crash whether or not I have clicked a button.
I have tried deleting my preferences differnet catalogs (empty and with images) and all with the same crash.
I have and Imac 24 Inch 2.4ghz (White) 3gb of Ram running lepoard (Latest revision)
I can still use it in 32 bit so that is not too much of a problem.

Disable the system preference »INK« while running LR 2 in 64 bit mode on an intel MAc Machine
Greetings Frerk

Is there a compatibility issue between Adobe Camera Raw, CS5, and Windows 8.1?

I have a new computer with Windows 8.1. I installed Photoshop CS5 (which runs fine under Windows 7) but now after editing images in camera raw and clicking on the Open Images button, it takes several attempts to pass the images on to open in Photoshop CS5. Is there a fix for this compatibility problem?

Many thanks Catherina for your reply.
Actually I have now discovered the cause of the problem. My speakers are Boston Acoustics BA735 digital speakers. I discovered that there was an Analog out put from the sound card and by changing the speaker connections they are now working albeit in Analog whereas previously they were connected Digitally.
The new drivers supplied by Microsoft have obviously switched the output to analog.
Are there any Drivers available which would allow me to revert to normal digital working.
Thanks again
Waffler (I hate that name but I choose it)

Download error, camera raw, elements 6

hello
I have a Canon EOS 500D and want to edit Raw Files but my photoshop elemnts wont allow me
tried updating by downloading camera raw software for new camera
error message
cannot open C\users\mike\pictures\adobe\camera raw\_MG_0387.CR2 because it is the wrong type of file
any help appreciated
mike

Hi Mike, for the 550d you need PSE7 or above, preferably PSE11. You have two alternatives for processing your CR2 files:
(1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Camera Raw 5.2 Windows PSE6

I have downloaded Camera Raw 5.2 onto my desktop and when I opened it PSE6 openedd also, so I thought it was ready to go but when I try to import raw files, I get the message that the files can't be read. What else do I need to do to have PSE6 read my raw files?
thank you,
denise

Denise,
>What else do I need to do to have PSE6 read my raw files?
Errrmmmm what about installing the ACR 5.2 plug-in according to the very detailed instructions on the downloads page. :)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4220
To install with Adobe Photoshop Elements: NOTE: You must follow all of the new instructions in order to successfully install the Camera Raw plug-in for Photoshop Elements.
1. Exit Photoshop Elements.
2. Open the download file, double-click CameraProfiles.exe, and follow the onscreen instructions.
3. Open My Computer.
4. Double-click Local Disk (C:).
5. Navigate to the location designated by your version of Photoshop Elements:
(Please read
[the path to the] directory carefully)
a. Photoshop Elements 6:
Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\File Formats
b. Photoshop Elements 7: Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats
6. Move the existing
Camera Raw.8bi plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version
[in a location far away from the Photoshop Elements path] in case you need to revert back.
Better yet, delete it altogether; you can always download it fro Adobe later in the extremely unlikely case you "need to revert back".
7. Copy the
[new] Camera Raw plug-in, Camera Raw.8bi, from the download into the same folder as Step 4.
8. Launch Photoshop Elements.

Camera raw elements 10

is there a download for camera raw for elements 10.

The last version for PSE10 was ACR6.7 and can be downloaded from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5385.
If your camera requires a later version of ACR (check it here - http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html) you can download the free Adobe DNG Converter and convert your RAW files to Adobe DNG RAW format, that PSE10 can open - http://www.adobe.com/uk/products/photoshop/extend.displayTab2.html#downloads.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Premiere Elements 12 Windows 7 64 Bit

Downloaded Premiere Elements 12 Windows 7 advised i should have downloaded 64 Bit version Can you help me find this version frustrating Thanks Gordon

Gordon
If everything is still unsettled at this point, let us try this.
Go to the following web site and follow its "Important: Very Important Instructions" word for word to download the tryout of Premiere Elements 12.
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
You will see the specific file before you click on it. BUT DO NOT click on the file until you have followed the "Important" Very Important Instructions" there. Otherwise you will get hit with an Access Denied message.
Once you have downloaded the program, install it and insert your purchased serial number in it.
If any problems with the above, then it is time for Adobe (only one that can help you at that point) to sort out the details of your purchase and what is going on with your order. If you do this, click on the following link to open it. When the link opens, click on the statement "I still need help" to bring up the Adobe Chat. The topic should be Orders, Refunds, and Exchanges.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=orders-refunds-and-exc hanges
Please let us know the outcome.
Thanks.
ATR

Unable to view camera RAW files on Windows 7 and CS4 - Have tried updates

All working OK until 8 days ago, then bridge just disappeared completely. Looked like it had opened but would disappear when I clicked on the icon. Re-installed, Bride now visable but unable to view .CR2 files in camrea RAW or in Photoshop, comes up as "unable to open". Have tried to install the 5.7 camera raw update, extract files, click on application, then photoshop opens and advises "invalid file type". Not sure what to do now and have a large number of weddin files slowly building up .... PLEASE HELP!!

When something works one day, but not the next, then something has changed. The task is to find out what that is.
Have you installed new hardware?
Have you installed new software?
Have you had any major updates installed?
Those are but a few things to ponder.
You might want to create a new System Restore Point (on a PC) for today, and then boot to Safe Mode, choosing System Restore, and choose a point, from at least 8 days before. Reboot, when prompted, and test. At the least, you have only lost a few minutes, as you can Restore to today's System Restore Point. The Mac has something called Time Machine, and I would think that it could do similar, but just do not know, as I am a PC-only guy.
Good luck,
Hunt

Migration from Photoshop Elements 8 (Windows 7 64 bit) to PE 12 (MAC)

I am planning to move from a PC Windows 7-based system to a MAC. As part of this move I will need to migrate Photoshop Elements from PE 8 in Windows to PE 12 on MAC. Back in July, I previously asked what steps would be necessary to migrate to PE 11 on MAC, but I delayed making the move (waiting for the new MacBook Pro) and will now be migrating to PE 12.
Do I still follow the same steps for a (hopefully!) smooth transition of my tagged photos and catalog? i.e., migrate from PE 8 (Windows) to PE 12 (Windows). Then from PE 12 (Windows) to PE 12 (MAC). Are there any gotchas or caveats that I should be aware of? I've read a few horror stories in various places and am nervous.
Thanks, Amy

I'm a bit slow on implementation. So far I have good news and bad news. But bottom line, I need some additional help.
First the good news: The upgrade in Windows from PE 8 to PE 12 went smoothly, with all tags and their hierarchical structure maintained. Ditto for Albums which showed up under "Local Albums."
I am now stymied with the bad news and hoping for more guidance: I just got my new MacBook last week, with my data files transfered over from my Windows PC. Unfortunately, the migration to PE 12 MAC (installed for me with the disc from the boxed version) did not make the transition smoothly. All of my tags came in under "Imported Keyword Tags," with the hierarchical structure totally flattened, and they cannot be dragged-and-dropped into a renewed structure into People, Places, and Events tags, as appropriate. Also, all of my Albums have disappeared.
I'm thinking that maybe I should restore the catalog. But when I started to do so, I was asked to choose between New or Original Location. Then, when I chose "original location" (not wanting to clutter my new hard drive with duplicates), PE 12 gave me a warning about the potential for changes to the existing file structure. So I stopped and decided to come back to the Adobe Forum for more help.
Thanks in advance! Again! Amy

Camera Raw + Elements 7 + Windows 7 64-bit

Similar Messages

Maybe you are looking for