Camera Raw's latest version does not support Nikon D800

Camera Raw doesn't recognize Nikon D800 - I loaded latest version, but still not reading it.

The answer is all there: http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html. Note that your camera is not yet supported, but is on the to-do list.
Mylenium

Similar Messages

  • TS1416 It seems the latest itunes version does not support sync functions to ipod classic

    I have updated my Itunes to version 11.04 but it seems this version does not support syncing with Ipod classic it seems it only supports the Ipod touch.  Does anyone have any solutions for this problem?

    Device not recognized. Take note of item 5.
    http://support.apple.com/kb/ts1538

  • The latest version does not show the security pad-lock, concerned about on-line purchases.

    When you go to make purchases you always had a pad-lock in the lower right corner letting you know it was secure. This latest version does not and I'm concerned about on-line purchases.

    In Firefox 4 you no longer have the Status bar that showed the padlock in previous Firefox versions.<br />
    The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server.<br />
    So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL.<br />
    The functionality of the padlock has been replaced by the [[Site Identity Button]] on the left end of the location bar.
    See also:
    * http://www.dria.org/wordpress/archives/2008/05/06/635/
    * https://support.mozilla.com/kb/Site+Identity+Button
    You can use this extension to get a padlock on the location bar.
    *Padlock: https://addons.mozilla.org/firefox/addon/padlock-icon/

  • Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Error : software component version does not support this object type.

    Hi ,
    We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR  .
    How can we solve this error.
    Regards,
    Syed
    Edited by: Umar Syed on Jun 11, 2009 12:01 PM

    Hi Srinivas,
    We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
    Once we login to our ESR from index page we have this option to choose
    Available Profiles :         Process Definition
                                       Service Definition
                                       Unregistered.
    We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
    Regards,
    Syed

  • Error when trying to re-mount a VHDx (the version does not support this version of the file format)

    Hi,
    I have a vhdx on a NAS that I use for server backup. I created the VHDx via disk management, mounted it and assigned drive letter X. I now created a script that gets triggered upon startup via task scheduler to remount the VHD. If I try to mount it however,
    it tells me this:
    No matter what I try, I can't mount it. Double clicking just says this:
    Eventviewer spits out error 137: The default transaction resource manager on volume X: encountered a non-retryable error and could not start.  The data contains the error code.
    How do I trouble shoot this? oO Originally I had created the VHD as expanding, where now I recreated it at it's full size of 900GB. Maybe that will make a difference.
    Thanks for the help
    Cheers
    Maike

    Hi Maike,
    Do you mean that you can mount the VHDX via disk management but cannot mount it via a script? If so, please provide the diskpart’s mount commands in the script.
    In the meantime, check if destination partition is NTFS formatted.
    Problem with Attach VHD function: The version does not support this version of the file format
    http://www.paulauskis.lt/2010/03/problem-with-attach-vhd-function.html
    Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Hi Mandy,
    I can not mount it after a reboot. So I create the VHDx via disc management and attach it afterwards without problem. After the server reboots and the attached VHDx dropps, I can't remount it. Gives me the errors I posted above.
    As I had mentioned above, I recreated the VHDx at it's full size this time, rather than expanding. That worked just fine and I can remount after reboot.
    So I consider this dealt with ;)
    Thanks anyway!

  • I need to download a eariler version of firefox because the latest version is not supported by my financial institutions or colleges im attending, every time i look for 3.6 im redircted to the 4.0 download

    I need to download a eariler version of firefox because the latest version is not supported by my financial institutions or colleges im attending, every time i look for 3.6 im redircted to the 4.0 download

    http://www.mozilla.com/en-US/firefox/all-older.html

  • LR 5 Cannon open CR foto's in CS5. Plug in Camera RAW is installed but does not. appeal in LR and PS.

    CR foto's in LR 5 will not open in Ps 5. Plug in Camera RAW 8.4 is installed but does not show in LR and PS.

    Canon 6D
    Verstuurd vanaf mijn iPad
    Op 3 mei 2014 om 23:40 heeft Keith_Reeder <[email protected]> het volgende geschreven:
    LR 5 Cannon open CR foto's in CS5. Plug in Camera RAW is installed but does not. appeal in LR and PS.
    created by Keith_Reeder in Photoshop Lightroom - View the full discussion
    Which Canon camera?
    The Adobe Camera Raw (ACR) plugin has no relevance to Lightroom, incidentally - doesn't matter how up to date ACR is, Lightroom doesn't use it.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6351284#6351284
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Camera Raw RC 8.6 does not automatically locate the lens profile for the new Canon 16-35mm f4 lens.  The profile is in RC 8.6

    I have loaded Camera Raw RC 8.6.  It can not automatically locate the new Canon 16-35mm f4 lens, although the lens profile can be manually found.

    Hi
    I forgot to answer one question.
    When I have a file from the Canon 16-35mm f4 lens in Camera Raw and go to 
    Lens Correction and check the box Enable Lens Profile Corrections, when I
    select  the model in the first box as Canon, it picks the wrong 16-35mm lens. 
    It  picks the f2.8.  I hope that you can get this fixed in Raw 8.6.  It is 
    a major headache for the user of this new lens.
    In a message dated 7/28/2014 3:10:44 P.M. Central Daylight Time, 
    [email protected] writes:
    Camera  Raw RC 8.6 does not automatically locate the lens profile for the
    new  Canon 16-35mm f4 lens.  The profile is in RC 8.6
    created by ccastleb (https://forums.adobe.com/people/ccastleb)  in Adobe 
    Camera Raw - View the full  discussion
    (https://forums.adobe.com/message/6591754#6591754)

  • Camera raw v.7.2 does not download with PS v.7.2

    camera raw v.7.2 does not download with PS v.7.2. help?

    Adobe provides a stanalone updater.  I scared up these links from other forum threads.
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/7.2.82/Setup.zip
    http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw7-7.0/7.2.82/Setup.dmg
    -Noel

  • Safari version does not support community tool bar

    Each time I open Safari 5.1.7 I get message "your browser version does not support community tool bar" does this mean I need to update safari?

    That toolbar/ct plugin seems to cause problems for all who install it!
    If you are running Tiger or Leopard:
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    If you are running Lion:
    From the Finder Menu bar, select Go ▹ Go to Folder, and in the box that opens write:
    ~/Library/Application Support/Conduit
    Delete the second item if it is there.
    Now select Go to Folder again and enter  /Library
    From the folder that opens, delete the following items if they are there (you may need your login password):
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    then close the folder. Now select Go to Folder again and write: /Applications/Toolbars
    Delete that item and close the Finder windows you opened. Log out then log back in, and you should be rid of it.
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • Camera Raw in PSE11 does not support Nikon D610 NEF; all software updates done accomplished - which Camera Raw version to download and where to find?

    Hi,
    Just bought a new camera (Nikon D610) and found out that Camera Raw in Photoshop Elements 11 does not support the RAW (NEF) files. Works fine with the Nikon D5200. PSE11 states that it's up to date. Support documents on Adope Website do not help at all. Some say the D610 is supported other say it's not. If I have to update Camera Raw, which version do I have to use for PSE11? Where can I find the download file?
    I find it somehow strange, that it's not possible to contact the support in a common way, but have to use this Adobe Community. Anyway, if it works... :-)
    Would be great, if someone could give me a hint, how to solve the problem.
    Best Regards,
    Boris

    Just got the new PSE12 and found out that Camera Raw 8.4 plug in can not be installed, if the system runs on Vista!
    So I got a new Nikon camera, new software (which can not be send back) and it looks like that I will need new system software and probably a new PC... :-(

  • PSE 8 does not support Nikon 7000D RAW files?

    I just got a Nikon 7000D, and when I tried to open up one of the .NEF (RAW) files in PSE 8, it wasn't supported.  I researched the Camera RAW plug-in, and from what I can tell, PSE 8 is only compatible with Camera RAW up to version 6.2.  It looks like version 6.3 is only useable with PSE 9.
    Camera RAW 6.2 does not support files from the Nikon 7000D, or at least the list I saw does not show it, so I did not download 6.2.  Is my only choice for being able to use PSE 9 with my 7000D to spend the money on PSE 9?   -Bill C

    You could also download the standalone DNG converter and make DNG files (which you may be able to process in 6.2), or use the Nikon software to convert your files and do any additional editing in PSE.

  • Pages 5.0 version does not support pictures in header

    I recently installed new soft OS X Maverick and along with this also renewed soft for Numbers, Pages, Keynote, and some more apps.
    Pages version 5.0 does not support its earlier version pre-set headers and footers. All the logos (picture files) I had inserted for my company template in the header are gone and I cannot re-enter them either. Does anyone can give e a hint on how to use picture files in Pages version 5.0 templates?
    This is first time in 2+ years that I prefer to use MsWord over Pages on my Mac, which is a pity.
    *I have tried to get used to new soft versions of numbers and pages now for around 3 weeks but it cannot make me to change my opinion that the eralier versions were much better. Unfortunately with OS X Maverick I have to use new versions for these apps, or do I, any hints?
    I already deleted once (2 weeks ago) OS X Maverick and switched back to OS X Mountain Lion (I use TM), but then decided after while to still update the op system soft to newest one available, as I've hoped that developers in Apple will come up with their soft improvements and bug fixes soon enough.
    Among the other disomforts (like pages, numbers and changed tag system) Safari is much slower than with previous version.
    Any hints are appreciated!
    Thanks, Paul

    https://discussions.apple.com/message/21546508#21546508 check this out

  • Latest version does not recognise my playlist or libraries!!Help

    Looks as though the latest version of i-tunes has loaded itself onto my pc. I was happy with the old version....because it worked! can I download and use a previous version?
    New version does not recognise my Playlists , libraries and i cant locate newly downloaded songs.
    I've tried following i-tuned help to restore libraries. i.e removing the library file to desk top and then the old one to trash, still nothing ...any help greatly appreciated.
    Driving me nuts.

    Is your iTUnes up to date? I believe the iPhone 5 requires iTUnes 11.

Maybe you are looking for

  • Low memory errors.

    When I ty to play Destination Treasure Island I get a low memory error message. Is this bad? Could my iPad be bad? If I reboot the iPad it starts and lays but I haven't played for hours at a stretch yet either. Should I be concerned? Thanks.

  • Problem with Sun PKCS#11 Provider and Ativcard smart card.

    Hi, I'm trying to make a signature with a smartcard. I have no problem signing with my card in applications such as Microsoft Office, Outlook (they probably use CAPICOM or MS CryptoAPI). There is only one certificate on my card with non extractable p

  • Can you tell me  how to know who deleted the user?

    Hi In my system, one user ID was deleted, Can I know who deleted  this User ID? Is there any table or Function Module to know it ? Regards,

  • How to build Java ME code without GUI desktop and WTK?

    I want to do application development for cell phones implementing MIDP and CLDC. I see that there is a sun java wireless toolkit available for this. However, it requires an X server or GUI desktop to execute the toolkit. I want a build environment wh

  • Calendar is acting up

    In my October page my calendar shows events (transparent) from November on top of my October events. Also to get to October from my November page I have to scroll twice to September and then go up to October. Very annoying!!