Camera Raw to jpeg in Elements 8

How do I save camera raw images as jpeg after editing? I do not see jpeg as an option on the save as drop down.

Camera Raw images are 16-bit. JPEG's only support 8-bit color information. As mentioned above, once they have been processed through the Camera Raw plug-in, you can open them for editing at 8-bit. You can also convert an already open 16-bit image to 8-bit by going to Image > Mode > 8-bit.

Similar Messages

  • How do I open Camera Raw dialogue box in Elements 11?

    How do I open Camera Raw dialogue box in Elements 11

    What version of mac os x are you using?
    It sounds like you set Enable to Camera Raw instead of setting Format to Camera Raw.
    Where it says Format, set that to All Readable Documents and for the most part you shouldn't have to change that.
    After you click on the jpeg file in the Open Dialog, set the Format to Camera Raw
    A video actually showing the above
    (the first several seconds of the video)
    http://www.youtube.com/watch?v=5o9fRzUGN04

  • Can't install Camera RAW 6.3 into Elements 9

    I have downloaded the installer for 6.3 but when I go to install it, I get this message. "Some updates failed to install."  When it tells me to fix the problems below, all it says is:  installation failed!
    I need this update in order to open RAW images from my Canon Powershot S95.
    I am working with Elements 9 on both an iMac running OS 10.6.8 and onto a new MacBook Pro.
    I have spent an hour reading everything I can and haven't been able to find any place to send this question to Adobe by email.  The phone system for help has more than a half-hour of wait time.
    Can someone figure out this problem?
    Cherie

    Thank you. I couldn't find the Mac update section at the Adobe site by 
    using the various search options.
    But,
    The new download 6.5 installed without trouble. However, the "open with" 
    command still prompted Elements to respond with an "Unrecognized file type" 
    error, even though Elements was not listed as the default application.
    Trying to open a nef file within Actrobat still showed the nef files grayed
    out as unopenable with the application.
    I tried to do the manual copying of the camera raw.plugin from the Assets 2
    folder as you suggested. H owever it does not appear to be used in the 
    newer version (6.5). Instead, there is a Profiles directory containing two 
    further directories: CameraProfiles and LensProfiles.
    The CameraProfiles folder contains a series of further folders for various 
    camera types, and each folder had a number of .dcp files. I can't find a
    "camera  raw.plugin" anywhere within Assets 2.
    So, in sum:
    1) The disk image Elements9CameraRaw-6.5-mul-AdobeUpdate downloaded from 
    Adobe installs correctly.
    2) The default program type for .nef files was changed to Elements
    3) Elements will not open a .nef file either from "open with" or within the
    application selecting open from the menu.
    Hoping you can help me work around this problem.
    Thank you.
    Rick Connolly
    In a message dated 5/2/2012 7:43:32 P.M. Eastern Daylight Time, 
    [email protected] writes:
    Re:  Can't install Camera RAW 6.3 into Elements 9
    created by Barbara B. (http://forums.adobe.com/people/Barbara+B.)  in 
    Photoshop Elements - View the full  discussion
    (http://forums.adobe.com/message/4375630#4375630)

  • Adobe Camera Raw (ACR), Jpeg Files and Metadata

    I have been using Adobe Camera Raw (ACR) with my Canon EOS 30D, an 8 MP camera, for a while now. I would make non-destructive changes to the raw file (.CR2) in ACR where the changes would be stored in an adjoining .xmp file. Jpegs of the unedited and edited camera raw files would be created so I have a before and after versions of the images that can be viewed anywhere.
    Now I have a Canon EOS 5D Mark III, a 22 MP camera and the raw files are much larger. I’m looking at using camera raw on jpeg files for some for my more casual photo shoots in order to save disk space. From what I have read, I can use ACR on jpeg files and that the changes would be stored in the metadata in the jpeg file. Is there a way for the changes to be stored in an adjoining .xmp file so that the original jpeg file is not modified, much like it is done with the .CR2 files?
    I am using Adobe Photoshop CS5 on a Windows 7 machine. All software is up-to-date.
    Also, I have found that Adobe’s camera raw handing is different than the raw handling of the photos using Canon’s software (DPP). Is there a way to make ACR closer to what Canon’s software does?
    Thanks,
    Mike

    Probably not going to happen.
    I agree, Canon's color is better than Adobe's in general - I just didn't know how good the Camera Standard profile might be for your particular camera.  I had hoped maybe they'd made it a very close match.
    Some time ago I got a very nice genius-level Camera Raw forum member named Vit to make me a custom profile that exactly matches the Canon color for my 40D, even to the point of emulating the way Canon fits the entire gamut of the captured image into the sRGB color space, so I'm more than happy.
    Others might tell you that you're silly for wanting the color to match, but I understand completely your position - if you do get that kind of feedback just ignore it and push on.
    Once you've set up a default to use Camera Standard, you may well be able to tweak the dozens of color controls to bring the Adobe default into line with the Canon color.  I did that once before getting my special 40D profile, comparing embedded raw file JPEGs with the Camera Raw preview display with a variety of images - it was tedious but effective.
    Best of luck.
    -Noel

  • Understanding Camera RAW with JPEGs

    I usually work on the design end, hence I rarely work (professionally) with files straight-from-camera. I get the stuff after the photographers are done with it.
    However, that is slightly changing and so I have a question about the Camera Raw plugin in Photoshop. In particular, processing JPEG images with it.
    If I understand correctly, it does not actually modify the JPEG image itself, but merely saves the correction information as metadata in the JPEG file, which is then re-constructed when the JPEG is re-opened.
    This would (assuming I understand it properly) make it a "safe" way of tweaking JPEGs as unlike most JPEG operations, no resave/quality-loss is occurring. Only the metadata is changing.
    Am I correct or have I horribly misunderstood this process?

    I can appreciate that - my own plug-ins all do their work in linear space as well for the advantages thereof.  However, it's not as if one can't get good results with the normal Photoshop tools, which for some reason seem to be out of favor...  One can convert to a linear profile to work on it in Photoshop proper, for example (though one has to craft or find a linear profile to use for that, as none is provided by Adobe).  I do my astroimage processing that way.
    I might change my workflow to involve Camera Raw where JPEGs are concerned IF Camera Raw could be set to write its metadata back to a sidecar file or the central database instead of rewriting the JPEG file.  I understand that it is not rewriting the actual image data, but I just don't want it writing back to my JPEGs at all.
    -Noel

  • Camera RAW ruining JPEGS, cant disable

    I have CS3.
    Certain jpeg files now ONLY open with Camera Raw in PS, no matter what I do. I just want to open them regularly, but I cant get ACR to go away, and ACR is corrupting the color somehow when it opens them this way.
    Under preferences, (in both PS and Bridge) I have disabled 'prefer camera raw' for jpeg, but that still doesnt help.
    The problem is the color gets ruined when opening them with ACR, no matter what color space I choose from within ACR when developing them, the files get a washed out appearance, and once opened this way, cant be fixed via normal methods, ala 'converting to' or 'assigning' the right color profile.
    Note that other jpegs not opened with ACR before seem fine and unaffected, they do not open via ACR in PS, they just open normally in PS, and I see the expected 'color profile mismatch' if relevant.
    Also note that the files that are getting ruined by ACR look OK in Bridge and from within the ACR preview window itself, but once opening into PS, they look totally different.
    Can someone please tell me how I can stop ACR from ruining them or just disabling ACR for good? Thanks. The files are essentially unopenable as they are right now, and I dont see any 'clear' develop settings options as later versions of PS seem to have.
    Thanks!

    Thank you!!!
    From your screenshot I realized I did not have those options available, so I upgraded from camera raw 4.0 to 4.1, and sure enough, they included those options in the update.
    Once I unchecked them, the notorious ACR did not open!
    I still wonder why the color gets corrupted by ACR, but am not the biggest fan of ACR anyway, so will not use, long live Lightroom, LOL.
    Do you know, is there a 'limit' to the level of ACR I can upgrade to from within CS3?
    Anyway, Thanks again for saving me,

  • Camera Raw 4.6 and Elements 6.0

    Installed Camera Raw 4.6 into Elements 6.0 & 5.0, but Elements 6.0 will not recognize Sigma Dp1 X3F files, but 5.0 will. The DNG converter works. Any clues to what could be going on
    Jack

    > why Im getting those bright red spots in the lighter areas of the photo.
    That's the clipping warning, which you can turn off by clicking on the triangle at the upper right hand corner of the histogram in the ACR preview. That means
    your image is overexposed and all those red spots represent areas that are
    totally blown out.
    You can try to rescue them with the Exposure and Recovery slider.
    You really need to read up on Camera Raw. You desperately need
    Jeff's Book (CLICK HERE).

  • Can I install camera raw 7.1 to elements 9

    can I install camera raw 7.1 to elements 9

    If I upgrade to Elements 11, will that support camera raw 7.1 and will that in turn support my Panasonic fz200 please.
    Date: Wed, 21 Nov 2012 03:23:53 -0700
    From: [email protected]
    To: [email protected]
    Subject: can I install camera raw 7.1 to elements 9
        Re: can I install camera raw 7.1 to elements 9
        created by MichelBParis in Photoshop Elements - View the full discussion
    You can't, but you can download and install the free DNG converter:see that other post:http://forums.adobe.com/thread/1102452?tstart=0
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4864030#4864030
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4864030#4864030
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4864030#4864030. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Photoshop Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?

    I have Photoshop Elements 9 and use a Nikon D5100.  I have downloaded camera raw 6.5 but cannot download photos to it.  Does camera raw start automatically or do I have to manual start it?

    That did I, thanks.
    99jon <[email protected]> wrote:
    99jon  created the discussion
    "Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?"
    To view the discussion, visit: https://forums.adobe.com/message/7178756#7178756
    >

  • Camera Raw 6.6 for Elements problem on iMac

    Downloaded and am trying to install the latest Camera Raw 6.6 for Elements on a Mac.. Fresh boot, and run install package, after testing package, and asking for password.. Package stalls with a "need to close ElementsAutoAnalyzer" message... Nothing is running on the Mac that I can find.. Have rebooted, and re-tried several times with the same problem..
    Anyone have any insight???
    Thank you for any help offered..
    Fred

    Thank you... excellent..

  • I have installed camera raw 7.4 for elements 9. Images taken by my canon 100d do not appear.

    I have installed camera raw 7.4 for elements 9. Images taken by my canon 100d do not appear.

    Nope. DNG is backwards compatible John and imho works better in Adobe applications than CR2. Upgrade to PSE 11 or download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.4
    Mac download click here DNG Converter 7.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • When will the Olympus OM-D EM-1 camera raw be available in Elements 12?

    When will the Olympus OM-D EM-1 camera raw be available in Elements 12?
    Will the Raw File Converter by backwards compatable with older versions of Photoshop?

    Peter The Sinister wrote:
    Camera Raw does not support Olympus OM-D E-M1 as of a few minutes ago Austrlian time.
    Have you checked Camera Raw supported cameras listed in this table?
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Olympus OM-D E-M1 support was added in Camera Raw 8.3
    The question still is - Is there a time frame for Adobe to update its Camera Raw for this camera?
    The question is which version of Camera Raw do you have installed and which operating system are you running?

  • Photoshop CS6 - How to export form Camera Raw to Jpeg of 300dpi?

    Photoshop CS6 - How to export form Camera Raw to Jpeg of 300dpi?

    What does your package include besides this disc?
    If your artistry and production are at a high-level and you are charging tens of thousands of dollars then protecting your reputation and future-sales possibilities by not giving them a disc might be wise, but if you just want to be done with things after you get paid, then a disc or flash-drive of native-resolution (not resized) and uncropped JPGs might give the most freedom for the client, although if I was your client, I’d want the RAWs or at least DNGs with your settings saved to them.  If there is enough space on the media then you could put a folder of JPGs and a folder of TIFs, separately.  It depends on how many you’re giving them.  If you’re high-end you could give them an Wi-Fi iPad with the photos on it, or at least a non-Apple tablet with a removable flash-card for more easy offloading.

  • Camera Raw to Jpeg

    How do I get my camera raw picture changed it  to Jpeg so I can put it on my web site?

    THANK YOU SOOOOOOO MUCH.  I WILL TRY THEM TMORROW!!!
    CAROL
    In a message dated 08/13/12 21:06:19 Pacific Daylight Time, [email protected] writes:
    Re: Camera Raw to Jpeg
    created by Silkrooster in Photoshop General Discussion - View the full discussion
    there are several ways to do so.
    1)You can find a save image button at the bottom left corner of the camera raw dialog box.
    2a)You can click the open image or open object button lower right hand corner of camera raw dialog box (hold shift key to switch between the two buttons) Then use file>save as... then choose jpg from the format drop down button.
    2b)or once the image is loaded into photoshop you can use file>save for web and devices... then change the preset or the format drop down menu to jpg.
    3) For a more automated approach, you can also use either file>automate>batch or file>scripts>image processor to convert a folder of images to jpg. Conversion is a copy process, it does not overwrite the files. Going this route, is suppose to bypass camera raw dialog box all together and save the new files in a new folder. This is also how to apply an action to the files during the process. It is wise to practice this on a few copied images first to see how it works, just so there are no surprises.
    4)you can also use Bridge and create a web page of jpg images.
    These directions may differ depending on your version of photoshop and operating system of your computer.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4619143#4619143
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4619143#4619143. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Camera raw error in photoshop elements 11

    I have PE11 with a Canon EOS Rebel T5 camera.
    When I try to open the raw image (CR2) in photo editor it get an error:
    "cannot open file because it appears to be from a camera model that is not supported
    by the installed version of camera raw"
    I have CR version 7.4.0.137
    On the Adobe site, I looked up the Camera Raw version I needed.
    The download I got was the Adobe DNG converter
    I can't figure out how to make Photoshop use it.
    Do I have to open and covert thru the DNG then open with Elements?
    I'm trying to open my raw images and save in jpeg, but this seems like a multistep process that I shouldn't have to do.

    The dng converter is a separate application from photoshop elements and converts the files to dng copies, which then pse 11 is able to open.
    how to use the dng converter:
    Camera Raw: How to use Adobe DNG Converter - YouTube

Maybe you are looking for