Camera raw update 3.2 create issues with panasonic square LX3 raw

Hi everybody,
since I've installed the last camera raw update(ie 3.2), my square raw from my panasonic LX3 are not recognised anymore by snow leopard, I can't even get a preview on any of my square raw.
As it was working perfectly before this update, is there a way to remove this update?
Can you reproduce this issue?
thanks for your attention

I have the Leica D Lux 4 and it does the same thing with my camera using 1:1 aspect ratio. I've since rolled the raw update back to version 3 and all is normal again. If you read this thread, it explains how to roll back the raw update.
http://discussions.apple.com/thread.jspa?messageID=11157435&#11157435
Andy

Similar Messages

RC 8.6 Issues with Nikon D810 NEF RAW files

RC 8.6 does not correctly process Nikon D810 NEF RAW files. See the following blog article for some details:
Nikon D810 vs D800E ISO Comparison

This is very helpful. My current workflow, until ACR 8.6 and LR fully support the Nikon D810, are to use the DNG converter and import the resulting D810 DNG files into my LR catalog.
I have not yet tried this (traveling right now), but I assume I can still make a custom profile using the X-Rite ColorChecker Passport and it's associated software for my D810 using the RC 8.6 DNG files. This is my normal workflow for all of my other cameras in LR, but the process is direct from native RAW and not DNG (to produce the custom profile).
Sent from my iPad
On Jul 28, 2014, at 6:51 PM, "max.wendt" <[email protected]> wrote:
RC 8.6 Issues with Nikon D810 NEF RAW files
created by max.wendt in Adobe Camera Raw - View the full discussion
Until Lightroom gets D810 support, you will need to use the ACR plugin in order to see the profiles. The DNG Converter always uses Adobe Standard, and embeds it into the DNG. Lightroom 5.5 doesn't have the D810 profiles.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image athttps://forums.adobe.com/message/6592335#6592335
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [https://forums.adobe.com/message/6592335#6592335]
To unsubscribe from this thread, please visit the message page at [https://forums.adobe.com/message/6592335#6592335]. In the Actions box on the right, click theStop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go tohttp://forums.adobe.com/thread/416458?tstart=0.

After the recent update I am having issues with Flash based games freezing and not responding.

After the recent update I am having issues with flash based programs not running or loading correctly. The programs will not load or take an extremely long time to load compared to jsut a few days ago. This happens across the board on anything flash based. Also, once they do load they will freeze, stop responding or need to be constantly refreshed to come back alive which is short lived at best. I went thru the help and did all the file deleting, cache clearing, disabling hardware acceleration, removing then reinstalling flash, and even removing and reinstalling my browsers. None of this has helped at all. I am using Chrome and it is up to date and I checked my Flash player and it is up to date. I am running windows 7 64bit.

Here's what you're up against guys,
Adobe writes the base code for Flash Player, and then hands it off to Google, who adapt it to a PPAPI plug-in (it's NPAPI when Adobe writes it). It's then "PepperFlash" and Google embeds it in their Chrome browser. While Google is pushing a "webwide" move to PPAPI Flash Content, a reinvention of the wheel so to speak, not everyone "got the memo", and Google is slowly making it so that PepperFlash will block NPAPI Flash content from running properly, and you have to disable PepperFlash to force the NPAPI plug-in to work, which sometimes fixes it, sometimes not. I have a feeling this is only going to get worse. HTML5 will eventually resolve the video end but game developers need to come up with something that won't require a plug-in.
And to the first post: Since PepperFlash is embedded in Chrome by Google, you can uninstall and reinstall Flash Player from here until your hard drive literally seizes up.... guess what? It has NO EFFECT at all on the PepperFlash plug-in in Chrome because it's a separate file in a separate folder and the uninstaller & installers don't have anything to do with it.

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

I want to download pictures from my iphone to my new computer. I already have itunes on my pc. I need to download itunes on my new laptop, will this create issues with my other itunes?

I want to download pictures from my iphone to my new laptop. I already have itunes on my pc. I need to download itunes on my new laptop, will this create issues with my other itunes?

m-cp wrote:
I want to download pictures from my iphone to my new laptop.
-> iOS: Importing personal photos and videos from iOS devices to your computer
I need to download itunes on my new laptop, will this create issues with my other itunes?
No.

SSL patch update has caused many issues with my iPhone 5c

Since the patch update completed, my iPhone is acting ridiculous. I cannot use safari. Every time I try to search something, it tells me it cannot connect to server. I also cannot delete voicemails. Once I delete, the phone freezes and the voicemail is not deleted. It comes back from deleted messages. When I hit the phone toggle button, it opens up my recent call list but it opens to the calls from Thursday, the day I did the update. It also deleted every text message that I had sent that day from my text history. I have shut the phone down, what other options do I have?

I have actually talked to a couple people that I know that have the 5c and it seems like it is a hit or miss. Some people have problems with the blue ones, im having issues with the white one, some people have no issues att all. COnsider your son luck that he has no problems. I have had problems with 3 different whote 5c over the coarse of 4 months now and contuining to have problems.

Does the 10.6.4 update fix the freezing issues with the i5 & i7 MBP's

Since I am on the fence about buying a new 15" MBP I would be interested to know what effect the new update has on the latest MBP's and the freezing issues some are experiencing.

The "freezes" that are mentioned in other threads here appear to be due to a wide variety of different issues. Looking at the relevant posts I'd reckon about one in thirty of them at the most are due to an unusual issue with a few of the current MBPs. The other 29 are simply the regular array of things that cause freezes on any computer - out of date software, corrupted directory structures, the migration of already corrupted software from older computers, duplicate or corrupted fonts, badly written third party software, the occasional shonky HD or RAM module, etc etc etc.
THis is a non-issue from what I can see. Some people may well benefit from updating to 10.6.4 , but probably only because it replaces some files that have been corrupted for other reasons in the past.
I certainly wouldn't be putting off getting a new MBP on the basis of the stuff here. Sure, some people will experience "freezes", but there doesn't really seem to me to be anything out of the ordinary being reported here with respect to the new MBPs. There are a thousand and one things that can lead to "freezes". In a few cases it probably is due to a hardware problem with one component or another. In the vast majority, however, it will simply be because of the common old "thousand and one shocks that silicon chips, magnetic storage and software developers are heir too"!
Cheers
Rod

Poor Panasonic Lumix LX3 RAW color in LR2.5

Hello,
I just bought a Panasonic Lumix LX3. I'm using Lightroom v2.5 to process the RAWs under Mac OS 10.6.2. The color in the LX3 jpegs is very good/accurate, but when I open most RAWs it is taking me a lot of work to get accurate color, especially if there is any blue sky in them, as Lightroom seems to be rendering some colors incorrectly. It's taking me way too much work to get my RAWs to look as good as the jpegs, which pretty much negates the RAW files' greater potential! I have used Lightroom with my Canon 20D and never had this problem. Also, with the LX3's supplied RAW software, SilkyPix, I don't have the RAW color issues. I want to use Lightroom with my LX3's RAWs, but it is very frustrating. Any thoughts or comments would be most helpful.
Thanks,
Greg

I have also had the same color rendering problems with LX3 and LR 2.4-2.6. The JPEG and initial preview looks fine, but the LR raw rendering just doesn't look good.
One solution I tried was to buy a Gretag Macbeth color checker (24 patch) and create a DNG profile for the LX3 using DNG Profile Editor from Adobe. This makes the color rednition significantly better, but the warm color spectrum is still a problem when it comes to high saturated areas.
I still haven't found what I'm looking for...
Any suggestions?
Thanks,
David

Since update to 3.5 issues with white balance

since update to Aperture 3.5 tonight the white balance in all of my pictures is completely wrong (way too cool with a greenish tint).
After setting the white balance with the eyedropper it reads on a Whibal grey card
R: 117
G: 188
B: 156
Any suggestions? Thanks a lot !

I cannot replicate this issue. Upon import of new images (RAW) I tested the White Correction using the eye dropper. No issue at all, despite reports here to the contrary.
In the previous round of this issue, it seems to have only impacted people who did not directly download new photos into Aperture, but rather were using some third party software to first do some processing of them.
The previous issue required some sort of fix not only from Apple, but also an update of the aforementioned third party software (Nik apps in that case.)
Ernie

Latest update has now produced issue with Car Stereo

I eventually got round to updating my iPhone 3g with latest software 4.2.1 this week and apart from the already reported issue of apps now lagging badly everything else seemed fine.
That was until i connected my iPhone to my Alpine iDA-X305 head unit which it has never had a problem with, now phone connects head unit will see phone and allows me to scroll through my play-lists or albums but no the songs although show on HU display the songs no longer actually play & you cannot fast forward or rewind either.
I saw the update notes did mention that it included optimisations for HU USB connectivity but i wouldn't call this an optimisation!!
My friends HTC droid phone still works and my old Iphone Nano still works so i know HU is still functioning ok.
Has anyone else experienced this?
It seems to me that now newer models are out the older generation phones either by mistake or deliberate move have more & more problems with each new update.

Issue resolved, sold iPhone and now using Android smartphone.
Works perfectly with all my audio devices and so much faster than iPhone should have done this much earlier

Gallery problems and photo export issues with all images JPG Raw damaged.

I'm starting to panic. I trusted Aperture 3 and upgraded entire library from Aperture 2.0.
Yesterday I uploaded new project from a photoshoot. and today is gone. Just like that. I did some export already before from that project so I know that it was there.
Yesterday I had couple crashes. But it should be saved??
Now I have serious problem. I export any Jpegs from Aperture. and when I want to process them in CS4 photomatix etc I get this http://www.flickr.com/photos/procekim/4360611822/
It does it in 32 and 64 bit? What is the problem? I can expot JPG and raw and get same result. entire gallery from 2000 to 2010 same issue.
I'm badly hurt!!!!!!!!!!!! do you have same problem??

this gave me a scare. I deleted preferences + everything in pro applications. I deleted Aperture and reinstall everything from the disk. Updated library and now it works. I even get my lost project back. It remembered my Places, but not faces, strange.
I have no idea what happened. But from now on I double copy files.

Lightroom Camera Raw Plug-in won't work with Panasonic RW2

I've just upgraded to Lightroom 5.7 (from 4) essentially to access the RW2 RAW files from my new Panasonic Lumix DMC-ZS50 (DMC-TZ70) as this camera is supposed to be supported by the camera raw plug-in (link).
Basically I got fed up of messing with the DNG converter and wanted inbuilt support for these files.
However having installed 5, upgraded to 5.7 (& rebooted) it still won’t read these RW2 files - the import tells me that the RW2 format is not supported.
According to the About info I've got Lightroom 5.7 and Camera Raw 8.7, installed. However I have download the camera raw plug-in 8.8 installer (link), copied it to the Lightroom directory and run it, but it's still saying Camera Raw 8.7 in the About screen and I still can’t access these files.
What am I doing wrong?

The link you posted had all the details to indicate that your camera is not currently supported by any release of Lightroom. It is only currently supported by Camera Raw version 8.8 which is a plug-in that cannot be used by Lightroom (and only by Photoshop). Adobe's free DNG Converter can be used to convert your RW2 files to DNG which is supported by any Lightroom release. Download it here:
Win: Adobe DNG Converter
Mac: Adobe DNG Converter

Security update appears to have issues with DKIM support

I noticed this in the logs this morning after installing the security update..
Apr 19 08:14:03 org.amavis.amavisd[41]: fetch_modules: error loading optional module Mail/SpamAssassin/Plugin/DKIM.pm:
Apr 19 08:14:03 org.amavis.amavisd[41]: Can't locate Mail/DKIM.pm in @INC (@INC contains: /Library/Perl/Updates/5.10.0 /System/Library/Perl/5.10.0/darwin-thread-multi-2level /System/Library/Perl/5.10.0 /Library/Perl/5.10.0/darwin-thread-multi-2level /Library/Perl/5.10.0 /Network/Library/Perl/5.10.0/darwin-thread-multi-2level /Network/Library/Perl/5.10.0 /Network/Library/Perl /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level /System/Library/Perl/Extras/5.10.0) at /System/Library/Perl/Extras/5.10.0/Mail/SpamAssassin/Plugin/DKIM.pm line 60.
Apr 19 08:14:03 org.amavis.amavisd[41]: BEGIN failed--compilation aborted at /System/Library/Perl/Extras/5.10.0/Mail/SpamAssassin/Plugin/DKIM.pm line 60.
Has anyone else seen this and know what broke? Cursory investigation looks like a Perl version mismatch and somebody in build land at Apple didn't catch it?

The issue is that amavisd-new got updated to 2.6.4, whereas a stock install of 10.6 server had an older version of amavisd, amavisd-new 2.5.1
See http://www.ijs.si/software/amavisd/release-notes.txt
search for:
amavisd-new-2.6.0 release notes
and see the information about introduction of DKIM signing and verification.
So what's happening now is that amavisd is attempting to load DKIM features.
So - since you haven't demonstrated any information about attempting to pursue this matter on your own, it's probably best to just disable it for now. Because it's something you weren't using previously, and so you probably aren't going to miss it for now.
Edit amavisd.conf (please don't use a GUI editor, go with nano or vi) and add:
$enabledkimverification = 0;
$enabledkimsigning = 0;
save the change and ensure the permissions are still good on your amavisd.conf file.
Stop mail services wait 30 seconds and start mail services again.

Account creating issue with credit !!!

Hi
i was trying to create an account an then the web site ask for payment method i entered my credit card details and then i recieved msgs from the bank that apple deduct from the credit please what should i do ?
how can i return my money back.
ERRRR

Why couldn't you create the account ? You got to the payment's screen and put in your card's details and then what ?
The temporary store holding charge is a standard thing, it will be removed/refunded by your card issuer :
If you update your billing information, the iTunes Store or Mac App Store will place an authorization hold on your payment card account, usually in the amount of 1 USD or the local currency equivalent, to verify your account information.

After updating to iTunes 11, issues with multiple Apple IDs on one computer

My boyfriend and I both use the iMac, and both have Apple IDs. We are separate users on the iMac, and each logs in to his or her "side." Neither one of us had the slightest iTunes problem until we updated to iTunes 11. Now, I just discovered that the iMac is linked with his iTunes account for at least another 46 days, which means that I'm not allowed to download to the iMac purchases I made under my Apple ID on my phone.
Is there a way to fix this? It's ridiculous that one of us would be locked out for 90 days at a time when all we want to do is back up music we legally purchased.

Multiple users can "authorize" content on one computer, but in order to re-download content (including Match and stuff purchased on another device/computer), you have to "associate" the computer with that AppleID, and this can only be done for one AppleID per computer and can only change every 90 days.
This has always been the rule, but it's more obvious since iTunes 11, because all your previous purchases now appear as cloud content, and it's easy to screw things up by accident.
If you email the iTunes store, it's possible they will reset the counter and let you switch back to your AppleID (they did for me), but they will only do this once.
There's really no reason to "back up" stuff purchased from the store. If you want to listen to it on the computer, you can do "transfer purchases" while syncing, so there are workarounds. Still, it's unquestionably a stupid rule that punishes legitimate users and does nothing to stop illegal sharing. I encourage you to write very nasty feedback about it.

Camera raw update 3.2 create issues with panasonic square LX3 raw

Similar Messages

Maybe you are looking for