[Camera Raw] Very slow previews on SSDultaniously

I need to work on 36 files (about 20Mb each) simultaneously opened in Camera Raw. I'm using the adjustment brush, the problem is that each file take 4-5 second to load and show me the preview. This is taking a lot of time.
The fact is that i'm now working on a SSD Hard drive, but nothing changed.
Is there a change to cut out dead times?
that's my current system:
MacPro 2 Quad Core 3Ghz Intel Xeon
Samsung SSD 128GB
Radeon X1900 512Mb Ram
10GB of ram 667mhz
Snow Leopard 10.6.2
Adobe Photoshop CS4
Adobe Bridge CS4
Camera Raw 5.5.0.97
Is that a resolvable problem or there's nothing to do?
Thanks
Filippo

another problem, when I go back to an already processed file (without quitting camera raw), CR realoads again the file... It shouldn't work that way! I've tried lightroom and it keeps memory of files (a bit), but LR doesn't fit in my workflow... and there's still the problem of the first loading...

Similar Messages

Camera raw 7 slow zoom in/out ,but fast process 2003 or 2010

Hi
i did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc
but i did find it's amazing fast if use process 2003 or 2010
may i use like default the 2003 or 2010 ?
how can i do it?
thanks
cheers

mantralightroom wrote:
but do you why 2010 is so slow compared to 2010 o 2003 ?
Just a suspicion: Adobe is adding more and more compute-intensive functionality in the newer versions - for example image analysis that affects the way the PV2012 controls work - in anticipation of more and more powerful computers. It's the normal way of things.
PV2012 seems to take about twice as long for me to complete a conversion than its predecessor. But on my reasonably powerful computer that's the difference between 2 and 4 seconds - no problem, really.
I'm not sensing any difference in zoom speed.
everytime i load a canon raw file , it 's always to 2012!
what 's wrong?
I don't know. Photoshop CS5 comes up with PV2010 for me for images I haven't opened before, because that's what I saved my Camera Raw Defaults as. I don't use the camera serial number/ISO specificity settings though.
Are you thinking of updating to Photoshop CS6? I mention this because the released version is available today.
-Noel

Very slow preview speed

After building a page with panels inside accordian container I'm noticing very slow preview times. Is this likely to be the case after publishing the site? The panels hold 3 to 4 Youtube or Vimeo videos. So there could be up to 20 videos inserted into the accordian layout.

As long as the videos are not set to auto play you should be fine. When you preview are you previewing in Muse or in Browser? Generally in most cases viewing in browser will give you a better idea.

Very Slow preview rendering for lightroom 5 on import

I am seeing very very slow rendering of preview images only when using the import function in lightroom 5. By slow, I mean for a shoot of 60 shots in raw, it could take 30 minutes before I can preview them all in the pane to see which ones I want to actually import. This was not an issue with lightroom 4. It is not an issue when using lightroom. Previews are fast there, even for images I've never pulled up before.
My hardware is a PC, with an intell i7 chip, and 16 gig of memory. My nvidia graphics card has the latest drivers.
I've seen a few others reporting this issue, so I'm trying to log it as a bug. Even though the dial up support text on the adobe lightroom says available 24/7, it now plays a voice recording that says only available m-f.
Brad

I'm having the same problem using Windows 7 (64b). I just took a shoot over the weekend for a significant birthday event. Now I can't load the photos. The work-around doesn't work as the program freezes before I get the chance to select the camera under "files".
I recently upgraded from 3.6 to 5 as I was also noticing a slowdown in the import function. That turned out to be a bad move I think. I also deliberately cleaned up the CF card and removed all my video recordings, as this seems to be reported as part of the problem, but to no avail.
This seems to be a pretty major bug to have in a major release that's been around for a while now, that I'm expected to pay for, and no sign of a resolution to date!
Cam.

Bridge does not show my Camera Raw Adjustments in previews or thumbnails.

Bridge CS6 on my Mac is not showing my Camera Raw adjustments in a preview pane or thumbnail.
Here's how it worked until recently:
I open a .CR2
I make some adjustments
I click "Done"
The thumbnail and the preview show the adjustments I made
Now, it works like this:
Open a .CR2
Make adjustments
Click "Done"
The preview and thumbnail don't show all the adjustments. I can't see the results of noise removal, but I can see a drastic change in Exposure
If I double-click the CR2 file, it opens in Camera Raw, and I see all my adjustments, including noise removal.
Here's what I've tried, but saw no difference (I restarted Bridge every time):
Purge Cache
Purge Cache for Selection
Replaced Camera Raw plug-in as described here: Camera Raw 8.4 | No metadata or Camera Raw edit
     (Doing so made Camera Raw disappear in Bridge, so I restored the original file)
Reset Preferences
Reset Standard Workspaces
All the above fixes were inspired by this thread: Re: Bridge CS6 not showing Camera Raw adjustments
Why don't I see the noise removal effect in the previews? I am sure I saw it a few weeks ago. I rely on that, to help me sort and cull photos.
I'm hoping there's a preference toggle that I accidentally changed. It's definitely a puzzle. (Version: Bridge CS6 5.0.1.21 5.0.2.4)
Message was edited by: moonatwork after updating Bridge version. I tried all the above fixes again, after updating Bridge. It actually got worse. I tried replacing the Camera Raw plugin, which failed as before. I then restored the previous plugin, as before, but Bridge now fails to honor the preference, "Double-Click Edits Camera Raw Settings in Bridge" and instead always opens Photoshop.

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Very Slow Previews

Adobe Bridge used to generate the thumbnail previews of my DV video clips as fast as Windows Explorer when in Thumbnails view. However, something happened that is causing Bridge to do this MUCH slower. It used to generate 2 or 3 thumbnails per second - bip...bip...bip - right down the line, very little processing power used. Now it generates one preview every 2 or 3 seconds and pegs my processor at 100%.
Anyone have any ideas here?

My bridge was doing the slow thing too. Using some of the tips already posted here I made it better, but not great.
First off, my raw cache was still pointing to my default C drive location and set to 1 GB. I boosted the size up to 4GB and moved it to a physical drive that is neither the program drive nor the windows swap drive.
Then I adjusted my bridge cache to its max size and pointed it to the non program and non swap drive. Now it's on the same drive as my raw cache.
Instead of purging the caches I closed bridge and deleted the .dat files from my raw cache directory and I deleted the entire data directory used by bridge's cache.
I also set the thumbnails to high quality thumbnails instead of convert to high quality when previewed. I just don't want to use quick thumbnails, but it might be even faster.
If I thought clicking my heals together three times and chanting "I just want to go fast" would help, I would do that too!!
Cheers

Camera running very slow

my wife has 3000 pictures on her iphone, camera it seam to be running slower. Do we need to remove most of the photos?

Yes... the iPhone is not intended to be primary storage of pictures taken with the device.
Copy them all off to a computer and only sync back those she wants/needs on the device.
As a bonus, when the device is lost, stolen, or simply fails, the pictures will not be lost.

Camera raw 8.3 preview now allways shows all changes instead the changes by tab

Since the last update now " the previw" shows all the changes made in all tabs instead tab by tab
Really hope someone can help me with this one.
regards
M.Steyaert

Agreed, while I welcome the ability to preview all the changes at once, I would like to retain the old functionality of the tab by tab preview. Hard to tell if you have used excessive noise reduction if that part of the image is as not visible without the general tad adjustments present (when trying to compare for detail loss).
Also well explained here: https://forums.adobe.com/message/6292569#6292569
A workaround for now would be to close the image and re-open after you're happy with each tab (as if you get them all right first time!).

Very slow preview of AE (12.1) .FFX files in Bridge (6.0)

Hi there, I hope someone can help me with following:
In AE (12.1) clicking on Presets, all the options to choose from are there but it takes a unworkable lot of time to see them in the loop previewing.....
I have already cleaned up the personal preferences file and can see that over 400 plugins are installed (if that helps to sort out)
Only 2% of 8 Gb RAM is used.
Anyone any idea where to start to resolve this??
Your input is highly appreciated!

Make Sure you have the latest updates. 12.1 is not the latest.
6.0 isn't either:
If that does not fix the problem answer this. What OS are you running? What else is open? What are your memory allocations in AE (did you leave enough memory for other apps)? Does Bridge work fine when AE is not running? Did Bridge ever work well on your system? If it did, what changed on your system?

Helix rear camera very slow

I have the thinkpad helix for two months. The front facing camera works fine, but rear facing camera is very slow: focus slow, and if move the camera a little, picture refreshes very very slow.
I thought this was the problem of driver, so I updated to the latest driver yesterday. However, the problem is still there.
This makes the camera useless.
Do you also have this problem? Is this a hardware or software problem? How to fix this? Thanks!
Solved!
Go to Solution.

excactly the same to me. rear camera (if I use the 4:3-5M: Camera-Option instead of 16:9 2,1 M-Camera) it's so slow, you can't work. 16:9 is slow enough.
I think very interesting: if you start the app "skitch" and use the camera -> it works very fast ...
with the "normal" camera app or onenote-app it works very very slow.
I don't understand the circumstanding ...
some weeks ago there was an update from micrsoft -> another driver was installed and the speed was pretty good, but there was an issue, you couldn't do a foto ...
I didn't find a newer driver for the camera - it's the driver form microsoft 2006 usb-verbundgerät - the newer driver from lenovo only replace the driver for the front camera but not for the rear camera - look at https://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/helix-rear-camera-driverinstallation-f...
kind regards
Dieter

Camera Raw 4.0 Fill Light Slider Not Working

Hi,
Just installed Photoshop CS3, and I'm having an annoying problem.
When using Camera Raw 4.0, all the sliders work smootly except for the Filli Light slider. Its the only slider that is almost impossible to adjust via dragging the slider via my mouse. Of course, this is probably my most frequently used adjustment.
The Photoshop CS3 was a clean install, directly from the CD provided by Adobe.
There was never any Beta version installed.
Sure hope that you can help.
Thanks,
Ira

The Fill Light adjustment is the single most processor intensive of all the controls in Lightroom. When you first move the slider it causes Camera Raw to generate a large blur copy of the image and that takes a bit if time. During that initial bit if time, fill Light will NOT be as responsive as the other controls in Lightroom...it only takes a moment but if you are trying to make adjustments while CR is building the mask, you'll get jittery results. The key to using it is to move the adjustment off zero, pause a bit while the mask is being generated and then start fine tuning the adjustment. After that initial move off zero is done, it should be about as fast as most of the other controls-and no, you DON'T want CR to auto-generate the mask for every image by default, it would make Camera Raw much slower overall.

Image Skips when Returning from Camera Raw to Bridge

Hi Folks
When I finished editing my image in Camera Raw and returned to Bridge I could immediately view my edits in the Bridge preview window. As it took about a second to update I could see the unedited image and then the updated edited image. Happy with that!
Now, when I return to Bridge I do not get the image I have just been working on in Camera Raw in the preview window as before, it jumps to the next image which is a bit of a pain, because I have to keep going back to the previous image.
May I kindly ask if anyone knows whether this is a setting somewhere in Bridge / Camera Raw and how I can get to it, or have any idea why this is happening. any information would be gratefully received.
Thanking you in advance for your anticipated help!

As has often and repeatedly been discussed in the Adobe Bridge Macintosh forum, Bridge 2.x (that comes with CS3) is easily the worst piece of software that has ever been released by Adobe—or any other major software developer.
Bridge 3.x (with CS4) was better. I have no experience with Bridge in CS5.
If you're staying with CS3, at least make sure that you have updated to version 2.1.1.9.
Wo Tai Lao Le
我太老了

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue

When using the camera downloader in Adobe Bridge CS6 with Nikon D5200 we are unable to see previews of the photos and it is very slow to download. The issue occurs under a the users rights, but not under admin level. This is a new issue.

Hi Jdentremont,
Lync client gets user photos by first querying the Address Book Web Query (ABWQ) service on the server, which is exposed through the Distribution List Expansion web service. The client receives
the image file and then copies it to the user's cache to avoid downloading the image each time it needs to be displayed. The attribute values returned from the query are also stored in the cached Address Book Service entry for the user. The Address Book Service
deletes all cached images every 24 hours, which means that it can take up to 24 hours for new user images to be updated in the cache on the server.
To troubleshoot your problem, please follow the steps below:
1. Navigate to
“X:\share\1-WebServices-1\ABfiles\000000000\000000000” folder. (ABS file share)
You should see some photo files in this folder as the following screenshot.
2. Delete all the files in this folder.
3. On test PC, delete local cache files.
%userprofile%\AppData\Local\Microsoft\Office\15.0\Lync\[email protected]
4. Sign-in Lync with the test account.
5. Go back to the ABS file share, check if there is any Photo file in the folder.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

Camera Raw 8 very slow(unuseable) in Photoshop CS6

Camera Raw 7 had it's major problems with Photoshop CS6 but had a few improvements to speed with the last update on my system. The update to Raw 8 has slowed everything down again to a painful 3-4 second wait before controls, crop tool etc. responds. Anyone else getting this? it seems deja-vu with Adobe. Completely unusuable for any day to day work. Back to CS5 again....?
Running Macpro 8 core 2.66 32gb RAM

First a reminder, these are user to user forums, not a channel to address Adobe directly.
I don't see any slowdown in ACR 8.1 hosted by Photoshop 13.0.5 under Lion 10.7.5 on my MacPro 1,1 Quad.
Try setting the Noise Reduction to zero and tell us if you see any difference.
What exact version of the OS are you running?

[Camera Raw] Very slow previews on SSDultaniously

Similar Messages

Maybe you are looking for