Camera resolution for iPhone 5

Hi, i have an iPhone 5 and i want to know if i can change camera resolution because some photos i did are 1280x1024 and i think is a bit too little for a 8MP camera. Please, help me!!!

My iPhone 5 default camera has also stopped shooting 8MP ever, regardless of light level.
The pictures are all 2048x1536 dimensions (3,145,728 pixels or just over 3MP).
Should be 3264x2448 or 7,990,272 pixels = 8MP.
Anyone know what's up with that?
iPhone 5, iOS 7.0.4, 64GB Black

Similar Messages

  • Low back cam resolution  in iphone 4.3.5..is there any solution?

    hi...i have the iphone 4 with the ios 4.3.5...so i have a bad resolution with the back cam...and i want to know if  the bad cam resolution is normal in the ios 4.3.5 or i have problems in my iphone...and if there are any solution for this....thank you...

    ok..thank you very much...but when i use the flash in the cam, the captured picture become flue and not clear...i dont know.... if i put the flash off and clarify the view , it becomes better....so with flash it isn't working......

  • Camera resolution for NetStream. Please help.

    I'm developing a videochat app that should work on different network speeds. The idea was to switch to lower resolution if by some criteria delay becomes too noticable (say, delay is 2 seconds, or dropped videoMessage packet ratio is more than 20%). Or if on the other hand user has fast network connection then app should increase the resolution and thus providing better video image quality.
    The problem: I can  not find anyone done this before, thus I am comming to the conclusions that I'm doing something wrong here.
    Is it possible that RTMFP is lowering the video image quality automatically when ever it thinks that delay is too huge? If this is the case, than should I set the video resolution for camera to 1600x1200 and feed it to the netstream and allow NetStream to take care of everything else, or there is some other magic numbers for resolution that I should set?
    If this is not the case and RTMFP is not taking care of lowering/increasing video quality automatically then how can I measure the quality. I know there are NetStream.info and NetStream.liveDelay, nether of which for RTMFP connections provides valuable information to detect delay. For me liveDelay is going up to 20 and then fluctuacting there, but for info videoLossRate property is always zero, even if I set everything to max and lag is very noticable.
    So how is RTMFP intended to use?

    I agree.  In fact, make it your workflow when sending this type of file to an online vendor.  The importance of the 350ppi requirement is for any of your transparency or raster effects to match their RIP's output line screen.  It's becoming an industry wide mistake to refer to file resolution in terms of dpi.  Do yourself a favor and get familiarized with the terms dpi and ppi, what they really are and what importance they play in output.  The advantage to PDF is the fact that you can establish the output resolution, color settings, and font embedding that will trim the variables that could go wrong on the vendor's end.  Your job is to make sure you apply the correct resolution, color, and font settings in the original file and again when you generate the final PDF.  If you are unsure, find a local print provider that knows what they are doing and can teach you how to setup a file properly.  You may have to intern somewhere, take a good course somewhere, and/or buy a really good and accurate book on prepress file standards.  Try your local book store or library.  Use better keywords when searching on the web, take a look at some of adobe.com's resources ( i.e., A Designer's Guide to PDF or similar ).  Now, you will need to learn more about Illustrator Color Settings and the Raster Effects Resolution Settings.  These are two areas you should spend a little time getting to know how different settings will affect output. In the case of your business card, set the raster resolution to "High".  That will cover you on their 350ppi requirement.  Do not get discouraged by seeing their proof on screen.  It's just a preview.  Do not get too comfortable with what you see on your screen unless your entire workstation is calibrated and even then you have to be cautious. 

  • Is there a fiber optic camera product for iPhone?

    Is there a flexible fiber optic camera for iPhone?

    The hardware on the 8520 does not support autofocus.  It's the same as asking if there will be an update to put a flash on the camera.  There just isn't a flash and there isn't an autofocus camera.  The 9630 and the 9650 have autofocus.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Camera Adaptor for iPhone

    Does anyone know if there is a way to transfer digital photos from my Canon 30D and get them onto my iPhone. I want a Camera to phone connection. I know Apple made a product that allowed users to do this with the iPods but I can't find any of that information on the Apple Store site.

    Don't know if this is an option for you but I use iPhoto. All of my pictures are there and I have created a folder called "Pictures for my iPhone". When I synch my iPhone with my computer via iTunes I have the synch transfer this file over. Works great. I think the phone changes the file size/pixel density of the pictures to a smaller size.

  • Apple has the camera inverted for iPhone 4s

    This is an obvious mistake on Apple's part.  You clearly are supposed to hold the phone with the volume buttons UP, to take a landscape photo.  However all the photos and videos are inverted. 
    Even on Apple's description of the camera, the high resolution shot of the squirl is upside down!
    http://www.apple.com/iphone/built-in-apps/camera.html
    I hope this will be a software update in the near future.

    I just tested on my iPhone 4, taking both photos and video, in multiple orientations (Portrait - power button on top; Landscape - volume buttons on top; Landscape - volume buttons on bottom).
    All of them took the photos/videos correctly, and everything was displayed correctly in the Camera roll.

  • Biggest Flop iOS 8.0.2 for iPhone 4s Camera Lack

    Hi guys,
         I was really excited that iOS 8 was being released. But it has embarrassed me so much that the camera lacks everytime we open the app. I have to say its been the biggest flop in the history of iOS of Apple, i never faced so much trouble using iPhone.
    Apple please release a update which fix the camera hang for iphone 4s.
    Hope the issue is resolved.
    Thanks.

    I have the same problem exactly, like many users of iPhone 4s. Please Apple solves the problem as always have done it. Thanks!

  • Better support for iPhone Retina display apps

    The iPad display is higher resolution than the iPhone 4. It would be nice if when I use an iPhone app on my iPad that is built for a retina display if it was not downscaled to a non-retina resolution. This would make the apps built for the retina display way more usable on the iPad.
    Seems like an easy change. I'm actually surprised it was not included as part of iOS 4.2.1.

    Again, that's not how it works. Apple didn't really have to do anything for the iPhone 4 because they're the same screen size. All they did was double every pixel for the iPhone 4 which is what you see when you use 2x mode on the iPad. If the iPhone had a 10" screen, even with the retina display it would look just as blocky as the iPad because of the screen size.
    Did you not notice the resolution for iPhone 4 is exactly 2x that of the old iPhones? 640x960 vs 320x480. They didn't do anything special with the iPhone 4 to make the old apps look good, the screen size being the same is what made the difference.
    this is all in reference to the iPhone 4 displaying apps not optimised for the retina display.

  • How can I change my Camera resolution from very high to lower for email use.

    How can I change my Iphone 4-8gb Camera resolution from very high to lower for emailing?  it is now 26-- x 19-- approx..

    Are both of your Apple routers configured for an extended or roaming network?

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • Hello guys I have a question,or rather a problem. how can I detach yourself iPhone operator Verizon USA? I mean as to call and what to say? I live in Ukraine, and the opportunity came up for to buy cheap 4S 16GB. but on Verizon. when I insert the original

    Hello guys I have a question,or rather a problem. how can I detach yourself iPhone operator Verizon USA? I mean as to call and what to say? I live in Ukraine, and the opportunity came up for to buy cheap 4S 16GB. but on Verizon. when I insert the original SIM card Verizon and I try to activate, says: (error occurred activation, if this problem happen again please call at +1................). this is the hour to use it through the R-SIM 9 pro. everything works нормальнои calls and Internet and SMS, but I want to officially unlock. beforehand thank you

    Well, you managed to find this support forum didn't you and you have an internet connection don't you?  Then if you have all these things, go and find the number by going to the Verizon website and it should not be hard to find the number.
    As for speaking English, this is not really our problem and it is surely something that you should have thought about before buying the phone in the first place.
    You also need to know that Verizon in the US is a cdma operator and if you purchased an iPhone 4s, then it should not be locked.  The Verizon 4s comes with a sim card tray that should be unlocked out of the box for use internatinoally on gsm networks, so all you should need to do is open the sim card tray and insert a sim card and you should pick up the local gsm network.
    A cdma phone does not actually use a sim card, so there would be no original sim card with the phone because when it is used in the US it will pick up the Verizon cdma network without a sim card.  The sim card is only for use on a gsm network which will not work in the US, but is designed to work outside the US.  Open the sim card tray and insert your own local sim card and the phone should work and should not be locked.
    Other than this, if you purchased the phone in the first place, it is the responsibility of the previous owner to cancel the Verizon contract.  This is nothing to do with you, so contact the seller and ask them.
    Other wise, go to the Verizon website and look up the number and call them.  As they are the phone company, ultimately, they are the only ones who can help you.

  • What will be the cost for iphone 5 replacement which is in warrenty but accidentally damaged.not screen it's just back glass of camera,so what will be cost to fix it or replace the phone in indian rupees, USD will work.

    what will be the cost for iphone 5 replacement which is in warrenty but accidentally damaged.not screen it's just back glass of camera,so what will be cost to fix it or replace the phone in indian rupees, USD will work.

    If you are in India, contact your local service center for a price quote. I don't know if Indian service centers can replace just the back glass or if they will need to replace the entire iPhone. To locate a service center, see:
    https://locate.apple.com/in/en/
    Make sure you select "iPhone" for the product time. Only certain service centers can handle iPhones.
    Regards.

  • Export for iPhone & iPad same time - Without resolution issues?

    Hello,
    I have developed an app for the iPhone and it runs perfectly fine on the iOS for iPhone. I am trying to port it to the iPad so I have done the proper stage adjustments and have set export as "iPhone & iPad"
    It opens up fine on my iPad, but the same app opens distorted on my iPhone (since the stage resolution isn't native, so it gets squished)
    How can I make my app iPhone/iPad friendly all in one IPA?
    Thanks.

    Use the same iphone version without any change on the stage and publish it for Iphone/Ipad with full screen parameter.

  • I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

    I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
    A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

    Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens.  I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

  • Lower the video resolution on iphone 5 for Apple TV?

    Can you lower the video resolution on iPhone 5 so that it will play on Apple TV. Now it takes forever for a short video to buffer. I know I can convert it to a lower resolution myself - once the video is complete - but many videos, such as kids' birthday parties are fine at lower resolution, and I'd love to be able to show them immediately on TV.

    Which kind of iOS you have
    if iOS 7.1 then it's software issue and many users complaining from its battery life
    I hope apple fix this issue in the next update
    for now you can disable any settings that running and you aren't using it (apps/games, wifi, bluetooth...etc)
    only keep what you need.

Maybe you are looking for