Camera Roll not showing up after updating to 8.1

I know the 8.1 update was supposed to bring the Camera Roll back to the photos app, but it is not showing up for me after updating. I am looking in Albums section of the Photos app. All I see are All Photos, Videos, Slo-mo, Recently Deleted, and my personal albums. Anyone else having this issue or knows how to fix it?

I'm not sure if there exactly the same or not. I'll illustrate with an example.
Let say I have device 1 and device 2, both with iCPL turned on. I take 5 pictures with device 2, and they show up on device 1 under "All Photos". If I later turn off iCPL on device 1, I don't know if those 5 photos will will be shown in "Camera Roll" on device 1 or not. To be clear, I'm not saying they won't, I'm saying I haven't tested it and I don't know what happens.

Similar Messages

HT4623 itune is not showing iphone after updateing to IOS6

itune is not showing iphone after updateing to IOS6

Have you tried the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Camera roll not showing up?

I have the old 8gb phone, all is well and i have over 2500 pics i have taken on the phone in various folders but 600 in the camera roll doesnt show up in itunes and wont show on my pc? this has been a problem for last few months and now i want to get them on my pc as i dont want to lose them!
I do have a couple of add on camera software on my phone so im guessing this may have caused the mess up?
Apologies if this has been answered before but i got bored of looking through previous posts trying to find the answer.
Also thanks in advance for any help! It will be very much appreciated!

THATS IT, ive given up! Im gonna throw it away and get a new one!
And im gonna find a new forum where people reply to my posts!

AppStore past purchases not Showing up after updating to IOS6

After I go into my iphone 4s and I go to Appstore and check my purchased items non of my purchases show up.
When i click in appstoreI> updates> purchased it either starts loading or crash.
I can see my purchased items in my ipod 4G and my syster Iphone 4S

I'm not sure if there exactly the same or not. I'll illustrate with an example.
Let say I have device 1 and device 2, both with iCPL turned on. I take 5 pictures with device 2, and they show up on device 1 under "All Photos". If I later turn off iCPL on device 1, I don't know if those 5 photos will will be shown in "Camera Roll" on device 1 or not. To be clear, I'm not saying they won't, I'm saying I haven't tested it and I don't know what happens.

Camera roll not reducing size after deleting photos

My camera roll stays the same size even after deleting 600 photos - I'm trying to still keep the roll included in my iCloud backup but had to size it down because the backups were too large and stopped without upgrading my storage. Why is this happening?

PhotoStream does not use up your iCloud storage.
Transfer your photos to your computer. Then delete them from the iPhone.
What steps are you having issues with?

Calendar not showing up after update?

I just did a software update and now my events aren't showing up on my mainscreen. I have it set on the "Today" theme so that my events show up on my mainscreen. After my update, they aren't showing up. I have a Pearl 8130. Any ideas?

Not sure if this is related but...(and I am on a MAC)
I just updated my BB9000 (running 4.6.0.167) to the new Desktop Manager Software v. 1.0.3 and when I completed my sync all of the data that HAD been in iCal has been wiped. Thankfully it is all still on the BB but I am stumped as to what has happened? I had been successfully using the two way sync mode by making sure I made NO updates to my desktop since for SOME reason RIM refuses to have an "overwrite (or replace) MAC data with BB data" option when syncing.
Is there something fundamental that I am missing here? Why won't the BB data show up on my iCal Calendar?
Thanks
Theo
Studio City, CA

IDevice not showing up after updating iTunes?

This issue has popped up for me (and my iPad Air device) a few times whenever a new version of iTunes is released & I've gone and updated to it. Just another little bug for Apple to fix at some point, I guess.
If it happens to you, Follow these simple steps below:
1. Close iTunes fully
2. Download the latest version of iTunes from here: http://www.apple.com/uk/itunes/download/
3. Open the iTunes Setup downloaded.
4. Click REPAIR, and next.
5. Once it is finished, restart your computer.
6. Open your iTunes, and plug in your device.
Done. Your iDevice should now show up as normal.

And if that doesn't work try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2

Safari does not show favicons after update to 6.0.3

Hello,
today I updated my safari browser and after that all my favicons are delated (only the blue sphere is there) and after a whole reset of safari and restart of the system the icons are still missing . Help me please!!!
current version of Safari: 6.0.3

Hello:
You almost assuredly reset Safari.
The favicons do not disappear as a result of installing the OS X 10.8.3 update (which includes that latest Safari.
When you click on the web site the first time, the favicons will reappear.
Barry

Analyser not showing results after update

Can someone please view the below and help me to determine why the results are no longer being downloaded. Or point me in the right direction of support or a support online chat.
We just did an upgrade of the Adobe Captivate Quiz Results Analyzer 1.5, before the update i could successfully download to disk all of the quiz results and access all of the .xml files. After the upgrade I cannot download the results to disk or generate report. I have deleted the internal server locations and tried readding these and haven't had any success. I get a message when trying to download report which says "Data is not present on local file system. Downloading Course Data...." and then "Download could not be completed" When i try to save to disk I get an error message which says "Downloading Course Data...." and then "Download could not be completed"
The client is also having the same issue accessing the results on their end.
Any ideas or help will be greatly appreciated

Hi there,
Welcome to Adobe Community,
Please remove Quiz results analyzer from the systems where it is giving problems. Then reinstall it and reconfigure the internal server. If that also doesn't work then try to install Quiz results analyzer on a new account and check under that. Also try to do Acrobat.com reporting just to test and see if that's working or not.
Thanks!

Boot fails due to /dev/sdb not showing up after update

For some reason, my secondary hard disk has stopped being detected after I updated my Arch Linux machine today. This machine has not been updated for about a year (I have been away). Basically, /dev/sdb* is not in /dev/. There is only /dev/sda*.
The current kernel installed is 2.6.39.
The error I get on boot is when it tries to detect the hard drives. I would try to provide a log file, however every time I try to plug in a USB stick, it says that it is disabling IRQ #10, and it won't start the network so I can't ssh the information to any other computer. I can log in by removing sdb from the fstab, so I will try to get /var/log/messages on here later.
I am using udev to detect my hard drives on startup.
Anybody know how to fix this problem?
I can log in perfectly fine if I remove any mention of sdb from my /etc/fstab.
Thank-you in advance for your help,
kev717.
Last edited by kev717 (2011-07-17 01:49:12)

Assuming you have a BIOS based computer, have you tried the BIOS configuration program to see if the drive is detected by the BIOS ?

[SOLVED] Volume groups not showing up after update

nunikasi wrote:
Hello!
I run a arch linux setup with LVM volumes on a LUKS encrypted drive /dev/sda. The header resides in the initramfs-linux-ck.img (So kernel and header are on a USB stick and my hard drive is completely encrypted).
Everything worked nicely with this setup until today. I ran a
pacman -Syu
and the kernel was updated as normal and made a new initramfs-linux-ck.img on the usb stick (mounted in /boot). This is the way I always updated the kernel, and it always worked, but for some reason, after the reboot, and after typing my passphrase I got an error
ERROR: device '/dev/mapper/nunikasi-root' not found. Skipping fsck.
This was strange, so I booted the latest arch live-cd and did a
cryptsetup luksOpen /dev/sda nunikasi --header (pathToHeaderFile)
and entered the passphrase and still there are no volume groups in /dev/mapper. Am I wrong in thinking that this command should load my volume groups as
/dev/mapper/nunikasi-root
and
/dev/mapper/nunikasi-home
Running
vgscan
also reports no volume groups.
Additional information:
Last time I updated the kernel was around 24th of June.
I did run pacman -r linux before the update, assuming there is no need for it since I run linux-ck. I hope this is not relevant.
Do you know what went wrong?
What was the problem?
As I saw that dm-crypt had a problem with finding my logical volumes, I fired up
cryptsetup luksOpen /dev/sda nunikasi --header (pathToHeaderFile)
dhex /dev/mapper/nunikasi
and found that the lvm metadata was cut in half. So I ran
dhex /dev/mapper/nunikasi /dev/sda
and quickly saw that there was an attempt to make a MBR on /dev/sda (I saw the boot signature 55 aa on offset 1FE-1FF). I remembered that I tried to use GParted some days earlier to format a memory stick, and I probably forgot to change from /dev/sda before creating a MBR. This is most probably what happened, and now I had to restore the metadata in some way.
What was the solution?
As I had never made a backup of the metadata, I knew that LVM makes one for you and puts it in /etc/lvm/backup/. So I fired up dhex on /dev/mapper/nunikasi and searched for it. Found the offset and did:
dd if=/dev/mapper/nunikasi count=2148 skip=8928722944 of=lvm-metadata.txt iflag=skip_bytes,count_bytes
Now I had the metadata backup and the right UUID for my physical volume. Only steps left were:
pvcreate -ff -u [UUID] —restorefile lvm-metadata.txt /dev/mapper/nunikasi
vgcfgrestore -f lvm-metadata.txt nunikasi
vgchange -ay
And my setup is working again!
Have a nice day,
nunikasi
Last edited by nunikasi (2014-07-07 20:30:16)

nunikasi wrote:
clfarron4 wrote:Hmm... Have you tried breaking out an Arch installation disk and having a look with that?
Yes, I wrote that in the original post.
Sorry about that. I've just read it again.
OK, based on the information you've given us (LVM on LUKS, VG=nunikasi and LVs=root,home, backed up header), I would have thought that the commands you issued in your original post would have unlocked it. I'm not going to make any assumptions about the header of the actual LUKS partition though.
nunikasi wrote:I remember core/filesystems and some other core packages were updated.
I've had a look through my pacman.log and I can't think of anything that might upset it (that said, I am quite tired). I run 5 (maybe 6) different kernels (3.10, 3.12, 3.14 and 3.15 branches) and I haven't had any problems with finding PVs, VGs and LVs on either of my systems.
I'm at a loss as to what could be up right now and I'll this thread for tomorrow (because sleep beckons).
EDIT: Wow. That's quite something.
Last edited by clfarron4 (2014-07-08 11:21:46)

Bonjour printer not showing up after update

I have a Canon MX860 printer that - until this morning - was hooked up to my Mac via an Airport Express and Bonjour.
Yesterday I used Software Update to apply a Canon printer driver update. Since then, I have not been able to use my MX860.
I tried deleting the printer and adding it back, but it does not appear in the "Default" pane of the Print & Fax preferences "Add printer" dialog box. In fact, no printers appear there at all.
The Airport network the printer is on is working fine.
Any ideas?

Could this have anything to do with my problem? I have no printers in the list either and I'm unable to add them:
https://discussions.apple.com/message/15868039#15868039

Iphone 3GS camera roll not showing up in iPhoto

i see the tab that says iphone 3GS in iPhoto but the pictures are there but just white dot outlines??? any help

Try this:
1. Open Image Capture.
2. Do a CMD+B to Browse Devices.
3. Uncheck the Connected box for "John's or whatever iPhone" and then recheck the box whose name changes to "Still Digital Camera."

Camera roll not seen in album after updating ios8

Camera roll not seen in album after updating ios8

That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album. This Help document explains, where you will see the photos now.
Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
Have you enabled the "Summarise Photos" option? Then disable it.
By default, Photos displays a representative subset of your photos when you view by year or by collection.
To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
And did you migrate your photos from iPhoto? Some photos may still be in the iPhoto Library, that is no longer supported:
See: Migrating from iPhoto for iOS to Photos on iOS 8

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is till empty. I imagine that the backup contains some corruption

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is still empty. I imagine that the backup contains some corruption

Hi cfgolf,
Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
2. Transfer content
Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
6. Set up as new
Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Cheers,
-Joe

Camera Roll not showing up after updating to 8.1

Similar Messages

Maybe you are looking for