Camera's Compatable with Final Cut Pro Studio 2

So I'm looking at buying a camera and the new final cut pro studio 2. The camera I was looking at getting was the Canon GL2, but Final Cut Studio 2 doesn't list that camera as one that is compatable and they don't really list many that are. I was wondering if the camera they list that work are just recommended ones or if they are the only ones that will work. Also if anyone has any suggestions for a decent camera. I really only want to spend a little over $2000. Thanks
- Josh -

Apple has long listed the GL1 but not the GL2 but I have no idea why. I have used the GL2 with FCP versions 1,2.3 and 4 and have Studio 2 on order and expect no problems. Using a camera for capture is pretty hard on it so I use an inexpensive mini-dv deck because I much prefer batch capturing everything and doing THAT with a camera (all the start stop and such) is even worse so I suggest a deck. I don't have Studio Pro 2 yet but I am expecting no problems....

Similar Messages

  • Yosemite compatibility with final cut pro ?

    Hello,
    Could you please tell me how/where I can be updated about Yosemite/Final cut pro compatibility
    when it will be released ?
    Best regards
    Gabriel

    Could you please tell me how/where I can be updated about Yosemite/Final cut pro compatibility
    when it will be released ?
    You may wish to be more specific here regarding your question. Yosemite was, of course, officially released on 16 Oct '14, As to FCP, v6.0.6 still functions (but my Motion v3.0.2 is no longer supported).

  • Is Mavericks compatible with Final Cut Pro 7 and the rest of Studio 3?

    I still use FCP 7 and limp along, but recent updates of FCP X are encouraging.  Until I'm ready to take the plunge, would someone tell me if there's been any feedback re Mavericks' compatibility with Final Cut Pro 7 and the other software in the Studio 3 Suite - especially Compressor and DVD Studio Pro?  I'd love to dl Mavericks but not if there are compatibility issues.
    Thanks ~

    Going from SL to Lion is not advised. Start clean.
    Install Lion. Run updates. Install FCS. Run updates.
    x

  • SI2K natively with Final Cut Pro X?

    Friends,
    Is it possible to work SI2K camera footages natively with Final Cut pro X?
    If so what are the procedures?
    Thanks in Advance
    Sreekumar Nair

    Submitting this question in the FCP X Discussion area.

  • Is Final Cut Studio with Final Cut Pro 5 still relevant and usable?

    Is Final Cut Studio with Final Cut Pro 5 still relevant and usable? I bought it about four or five years ago and never started learning it, but would like to start learning editing now. Thanks.

    That is the version I have. What formats can I work with in FCP 5.1. For example, can I edit movies from my Nikon Coolpix 7900 point and shoot that is about five years old? My Panasonic DV camera that is also about five or six years old? Will I be able to burn these types of footage to disc once edited and watch them on a DVD player. Thanks for your former replies.

  • I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
    Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?)  then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
    Thanks!!

  • Do cameras that work with Imovie also work with Final cut pro x?

    I have a Sony Bloggie (MHS-PM5) that is compatible with Imovie, will it also work with Final Cut Pro X.

    It does work!

  • Downgrading from Final Cut Pro Studio to Final Cut Express

    Will Final Cut Express let me use the Boris Title 3D Video Generator effect that I now use in Final Cut Pro Studio?
    Does it have an outline text video generator effect?
    Since I have DVDSP 4.1.2, will I be able to drag my exported non self-contained quicktime movie into DVDSP? I have read I can use iDVD.
    I see from the tutorial (http://www.apple.com/finalcutexpress/tutorials/) it does not have the ability to log clips for batch capture later but it does have a project button. Does anyone use that and can share what it does?
    I have a Canon DV20 HD camera which I use for DV also. Since I have read that FCE will not read HDV from this camera, has anyone brought DV in using this camera?
    Does anyone see any other negatives to downgrading?
    I have been using Final Cut Pro from version 1.5 since it did what I needed it to do. Over the years they have added a plethora of packages to it, none of which I use. So why spend 700.00 to upgrade when I can spend 200 to get what I will use?
    Thanks for your input.

    Lots of questions:
    "Will Final Cut Express let me use the Boris Title 3D Video Generator effect that I now use in Final Cut Pro Studio?"
    Yes.
    "Does it have an outline text video generator effect?"
    Yes, but don't use. Use Title 3D.
    "Since I have DVDSP 4.1.2, will I be able to drag my exported non self-contained quicktime movie into DVDSP?"
    Yes. Or you can use Compressor, which you should have, to encode your video.
    "I see from the tutorial (http://www.apple.com/finalcutexpress/tutorials/) it does not have the ability to log clips for batch capture later but it does have a project button. Does anyone use that and can share what it does?"
    It allows you to log your material first, selecting the pieces on the tape you want to capture and then going back and letting the machine capture the selected pieces.
    "I have a Canon DV20 HD camera which I use for DV also. Since I have read that FCE will not read HDV from this camera, has anyone brought DV in using this camera?"
    Never heard of camera.
    "Does anyone see any other negatives to downgrading?"
    What version are you using?

  • Specifications for Final Cut Pro Studio (FCP 7) ?

    I have a G5 running OSX 10.4. I'm pretty sure I have to install OSX 10.5 to run the studio. But what about my other computer specs? Will my GeForce FX 5200 Graphics Chipset be enough? Will Quicktime 7.0 be enough? Here are my G5 specs. Following are the Apple FCP Studio specs. What do I need to do to get this G% up to speed to run the full, latest FCP Studio? Any help would be appreciated greatly.
      Machine Name:
    Power Mac G5
      Machine Model:
    PowerMac7,2
      CPU Type:
    PowerPC 970  (2.2)
      Number Of CPUs:
    2
      CPU Speed:
    1.8 GHz
      L2 Cache (per CPU):
    512 KB
      Memory:
    4.5 GB
      Bus Speed:
    900 MHz
      Boot ROM Version:
    5.1.4f0
      Serial Number:
    G84081BTQES
    GeForce FX 5200:
      Chipset Model:
    GeForce FX 5200
      Type:
    Display
      Bus:
    AGP
      Slot:
    SLOT-1
      VRAM (Total):
    64 MB
      Vendor:
    nVIDIA (0x10de)
      Device ID:
    0x0321
      Revision ID:
    0x00a2
      ROM Revision:
    2060
      Displays:
    Display:
      Type:
    Display
      Display Type:
    LCD
      Resolution:
    1920 x 1080 @ 60 Hz
      Depth:
    32-bit Color
      Core Image:
    Supported
      Main Display:
    Yes
      Mirror:
    Off
      Online:
    Yes
      Quartz Extreme:
    Supported
    Display:
      Status:
    No display connected
    QUICKTIME 7.0
    FINAL CUT PRO STUDIO SPECS
    Video System NTSC, PAL, HD Video Formats DV, DVCAM, DVCPRO, DVCPRO50, DVCPRO HD, HDV, XDCAM HD, IMX, P2, AVC-Intra, AVCHD, XDCAM EX, Uncompressed 8-bit and 10-bit HD (4:2:2 YUV) via PCI card, Uncompressed 8-bit and 10-bit SD (4:2:2 YUV) via FireWire or PCI card Audio Formats 48 kHz, 16-bit Supported Codecs ProRes 4444, ProRes 422 (HQ), ProRes 422, ProRes 422 (Proxy), ProRes 422 (LT), ProRes Apple Intermediate Codec, OfflineRT Photo-JPEG Codec Supported File Types Video: QuickTime
    Audio: AIFF, WAV
    Image: PSD, BMP, JPEG, PICT, PNG, SGI, TARGA, TIFF Number of Video Tracks 99 Number of Audio Tracks 99 Film Editing Support Yes, Cinema Tools 4.5 included
    Support for 35mm 3-perf, 35mm 4-perf and 16mm-20 Edit Decision List (EDL) Support Yes Deck Control FireWire, RS-422, RS-232 DVD Authoring DVD and Blu-ray authoring support via DVD Studio Pro 4 System Requirements Minimum Requirements for Installation
    Computer: Mac computer with an Intel processor
    Operating System: Mac OS X 10.5.6
    Memory: 1 GB
    Hard Drive: 4 GB for applications; Additional 46 GB for optional templates, content and tutorials (9 GB for DVD Studio Pro 4 content, 7 GB for Motion 4 templates and tutorial media, 22 GB for Soundtrack Pro 3 audio content, 8 GB for LiveFonts and LiveType animated elements and templates
    Graphics: AGP or PCI Express Quartz Extreme graphics card; Final Cut Studio is not compatible with Intel graphics processors
    Display: 1280 x 800
    Software: QuickTime 7.6 or Later
    Hardware: DVD-ROM drive for installation
    Color Requirements
    Computer: Mac Pro, 17" MacBook Pro, 24" iMac with Intel Core Duo, 2.5 GHz Power Mac G5 Quad-Core
    Graphics: ATI Mobility Radeon X1600; ATI Radeon X1600; nVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 6600; nVIDIA Quadro FX 4500
    Display: 1680 x 1050
    Hardware: 3-button mouse
    4K and 2K DPX Files: 512MB of VRAM
    32-Bit Rendering: 256MB of VRAM
    DVD Studio Pro Requirements
    Computer: PowerPC G5 or Intel Core Duo for HD DVD playback
    Hardware: SuperDrive or other DVD recorder for burning; Double-layer recorder required for double-layer burning; External hard drive or Internet transfer required for delivery of HD projects to replicator; DLT drive, external hard drive or Internet transfer required for delivery of SD projects to replicator
    Soundtrack Pro Requirements
    Hardware: Audio interface with 6-channel sound output required for 5.1 surround monitoring; Audio interface with multiple inputs required for multitrack recording
    Recommended Configurations
    Memory: 2 GB for compressed HD and uncompressed SD editing; 4 GB for uncompressed HD
    Motion Recommendations
    Graphics: ATI Radeon X1900 XT, X850 XT, X800 XT, X1600; nVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL; nVIDIA Quadro FX 4500; 256 MB VRAM for 32-bit rendering
    Color Recommendations
    Graphics: ATI Radeon X1900 XT
    Display: Dual displays with 1920 x 1200 resolution Qualified Hardware FireWire camcorders and decks; Mac OS X-compatible analog and SDI capture hardware

    It will likely run FCP but won't run Motion or Color. If the fastest external drive connection you have is FW800 then you'll be somewhat limited in the number of streams of video you can work with at the same time.
    Also, it would run better with 4 GB RAM.
    x

  • Is the Canon Legria HF M56 compatible with Final Cut Pro X

    I am new to Mac and new to Final Cut Pro X. I am looking to buy a new HD Video Camcorder to use with my new computer/software and wondered whether or not the Canon Legria HF M56 is compatible with Final Cut Pro X.
    If it is, do you have to import the footage directly from the Camcorder, or can you first save the files to the Mac and import them that way?
    I currently use a Sony HandyCam HDR-SR10 which produces AVCHD .mts files. I have these saved on my Mac after transferring them over from my PC but Final Cut Pro X cannot import them. Very frustrating for a professional app to be unable to import these files. Even Cyberlink Power Director can use these files.
    Thanks for your help
    ConvertedAppleFan

    It's not on the tested list but it may well work.
    http://help.apple.com/finalcutpro/cameras/en/index.html
    Why don't you download the trial and try it?

  • How do you Chapter Video Podcasts in Final Cut Pro Studio 2

    I am in final cut pro studio 2. I have my video setup like I want. I placed Markers and labeled them as chapters. But when I try to export i just get a chapterless video. How on earth do i get this to work. I tried exporting with Compressor and exporting with Quicktime pro. I just want to make a chaptered video podcast why is it so darn hard to do so? I went hunting everywhere on the net and nothing explains just how to do it in Final Cut Pro. Everything is iMovie this iMovie that .... well sorry, but I don't want to use stinking iMovie.
    Sorry for venting I'm just really aggravated because I have tried four different things hoping it would work but each export which is two hours of wasted time that I fall more behind.

    Hi Patrick,
    My FCP experience is limited - I write software add-ons for it, but I don't edit. I remember this issue coming up before though. QuickTime has the ability to create chapter tracks, but you can't do this from markers in FCP. (I used to do it with the great QuickTime editor in Adobe GoLive.)
    The chapter tracks in .mp4 video are similar but different to the QuickTime chapter tracks, so I assume that the FCP markers won't work. Frustrating!
    Why don't you try out PodcastMaker free for 30 days: http://www.lemonzdream.com/podcastmaker/ This software is very easy to use and (outside of Garageband) is the easiest way to add chapter tracks to a podcast, and even though it's an extra step, it will help you with the podcasting side of the workflow you'll eventually be faced with.

  • Final Cut Express HD 3.5 and Final Cut Pro Studio 5.1.1

    Hi,
    I have a client with both of these installed on the same machine (running 10.4.6).
    When they try and launch either application, the splash screen comes up, loading various filters, etc. then they get an error message:
    "File Error: A file of this name already exists" "OK"
    Clicking "OK" closes the app.
    Any idea:
    1. What the file in question is?
    2. Can it be deleted to let the app run?
    3. Can Final Cut Express HD 3.5 and Final Cut Pro Studio 5.1.1 be used on the same machine?
    I'll post this on the Final Cut Pro thread too (but with the order reversed).

    1. No idea.
    2. Depends what the file is.
    3. Yes. Though I've never tried to run them at the same time.

  • Can you burn multible movies on one bluray dvd disc with final cut pro

    how to burn two completed quick time movies to blu ray dvd with final cut pro? Ive tried but wont play

    Mark,
    Welcome to the wild and wacky world of DVD's and Mpeg2!
    Here are a few things that might help.
    it seems to want everything as a QT. This presents size limitations.
    Not really, iDVD simply takes the QT files that you feed it and uses its own compressor to encode them to mpeg2 files. As long as your source material is not over 2 hours iDVD can handle it.
    I'm planning to export from fcp using Compressor in the hope of fitting everything onto one disc
    You can do this, but you might find it simpler to simply export a QT reference movie from FCP and drag that into DVDSP. DVDSP will then use compressor to create the mpeg2 files that you need. I say this because some find compressor a little intimidating at first. (I know that I still do.)
    Now, go find the manuals that came with your software and start reading, DVDSP is a powerful program and the manuals are the best place to start.
    Good luck!
    K

  • Setting up final cut pro studio after fault

    Hi
    I installed final cut pro studio a few months ago but my mac then had to go in for repair. I have since had it back but when trying to run any of the studio applications, when asked to enter my serial number again it says it cannot run application as licensing data is corrupt.
    can anyone help?
    thanks

    If it was my mac, I'd archive anything of importance to another drive or cd's or data dvd's, then do a complete erase and install of everything, starting with the OS.
    Install OS, run the updates, install applications, run the updates. Repair permissions and reboot after every installation. You'll be stunned at how spiffy your machine will then be.
    You can search this forum for how to just trash the corrupt licensing data. But personally, I wouldn't do that. FWIW.

  • Specs for Final Cut Pro Studio 2 - Which current mac?

    Hi All,
    Just wondering if Final Cut Pro Studio 2 can be run on a current iMac Core 2 Duo?
    Or is it only to be used on pro machines like the MacBook Pro and Mac Pro?
    I am looking at learning the program and need to know if my current iMac would be good enough to learn on?
    Many Thanks,
    Dean

    Hi Dean Redding Mac-
    According to this page you are all set with actually exceeding the minimum system requirements: Final Cut Studio 2
    Luck-
    -DaddyPaycheck

Maybe you are looking for

  • Why are my bookmarks not in the dropdown menu?

    I upgraded to the Firefox 4 beta version and none of my bookmarks show up in the dropdown menu. Id also like to point out thatnone of my previously saved passwords show up and Firefox doesnt ask me if i want to save them when i enter them. Im not sur

  • C2-03 TEXT MESSAGING INSERTING CONTACT PHONE NUMBE...

    I'm a celphone prepaid loader so I often refer to my phonebook  whenever I send a prepaid  load. In other nokia phone model to paste a contact person's name or phone number in the body of the text message all you need to do is choose "insert name" or

  • How to select the production versions for MTO?

    Hi PP Experts, In our scenario we have two production versions and also we are in MTO strategy. While creating the sales order is there any option to select the production version (i.e.) before planning for that corresponding sales order I have to ch

  • Which FM used in xml inbound in SUS PO

    Hi Please let me know my queries. a. What is the Function module used for xml inbound ( FOR PO document ) to SUS from MM system via XI system. b .What are the BADIS available for xml inbound operation for SUS scenario from MM system Regards Pooja

  • From wich source files does Multilingual Application Toolkit (MAT) generate the base strings?

    I have a set of *.resjson files in project. Whenever I change them, MAT seems to use them as the base during build to generate the translation XML files. So that means, that the app still needs those resjson files for MAT to work, but those resjson f