Camera sen in max, snaps in the vi not possible

Hi,
I have a slightly different question, my camera is seen in MAX and
works fine, but it's impossible to snap any pictures in a simple vi. I
changed already all the parameters, nothing happens. There must be
something wrong with this vi. But there isn't any error message.
Who can help me?
Attachments:
Kamera_guppy.vi ‏2812 KB

Hi,
first good that it is working in MAX
Ok, first thing you should try is delete trigger and shutter elements from your VI. Is it then working? When it is working then reduce shutter value.
Thanks,
Rebecca Fox
Rebecca Fox
Applications Engineer
National Instruments

Similar Messages

  • Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

    Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

    See if this helps : http://support.apple.com/kb/TS3694#error3194

  • How activate Camera Raw for Elements 11.Update button is not possible!!!

    Hi @all,
    i have Elements 11 and can not activate the update for Camara raw . At the moment is version 7.1 active.....but i need a higher version for my cameras. So what can i do now?

    I downloaded DNGConverter_7_4.exe but i have the same problem ....Element can not open the raw files of my camere because Camera raw 7.1 is active....how can i change it? Sorry for my bad english ....anybody here for german?

  • Mono Audio signal: adjustment of the balance not possible

    Dear all,
    according to the IOS 5.0 User Guide, "Mono Audio" can be used to combine the left and right stereo channels into a mono signal played through both channels which works as expected.
    In addition it should be possible to adjust the balance of the mono(!) signal for greater volume on the right or left. This would be very beneficial for me and others with a hearing loss at one ear, but doesn't work on my iPhone 4 as expected. It seems, that the balance setting is only effective in the 'Stereo' mode.
    Any suggestions on how I can get this feature working on my iPhone  are highly welcome.
    Thanks,
                    Thomas

    Dear all,
    according to the IOS 5.0 User Guide, "Mono Audio" can be used to combine the left and right stereo channels into a mono signal played through both channels which works as expected.
    In addition it should be possible to adjust the balance of the mono(!) signal for greater volume on the right or left. This would be very beneficial for me and others with a hearing loss at one ear, but doesn't work on my iPhone 4 as expected. It seems, that the balance setting is only effective in the 'Stereo' mode.
    Any suggestions on how I can get this feature working on my iPhone  are highly welcome.
    Thanks,
                    Thomas

  • GoPro HD - Why is it not possible to use a GoPro as an external/remote camera on my iPhone?

    If I could cable a GoPro Hero HD camera to my iPhone, why would I be unable to tell my iPhone 4 to use it as an external video camera and video source? Or any USB camera for that matter?
    Why is this not possible?
    Ian

    There is no USB camera driver in iOS.
    For security reasons, none can be added by third parties.
    If they wanted you to use it, the manufacturer would write an app for that.

  • Message received when openning the  Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?

    Hello,
    How can I fix this problem?
    Message received when openning the  Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?
    Thanks in advence,
    FL

    FLOureiro
    What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update using an opened project's Help Menu/Update? If not, please do so.
    For your immediate issue, have you update the Online Services in preferences?
    Where are you in the program when you get the message "Not possible to initialize on-line services".
    Are you in a country outside of the USA?
    There certain online services that are just not available outside the USA.
    Please review and consider and then, based on your details, we will consider what next.
    Thank you.
    ATR

  • I recently purchased Scan Snap for my Mac OS.X which came with Acrobat XI standard. This does not load on the Mac. Can I switch this for a Mac version?

    I recently purchased Scan Snap for my Mac OS.X which came with Acrobat XI standard. This does not load on the Mac. Can I switch this for a Mac version?

    Order product | Platform, language swap

  • How do I get a list of cameras names from MAX to use in a CVI app?

    I wish to avoid any confusion in selecting cameras to use in my CVI application, so I'm looking for a way, from within my app, to get the list of camera names as set up in MAX. Then I can populate a listbox and the user can choose their camera without having to guess or refer to an external listing for the MAX name. The selected name will then be passed to IMAQdxOpenCamera.
    Thanks!

    Found it! (Should have looked in the hardware boards first, but it seemed to be a software question.) Anyway, use IMAQdxEnumerateCameras.

  • Why is my USB camera recognized in MAX but not in LabView?

    I am trying to use myRiO to acquire video using a Logitech HD Pro Webcam C920. 
    I am using LabView 2013 and have the NI-IMAQdx 4.2.0.3.0 software installed on the myRIO. 
    I have tried a couple sample programs: https://decibel.ni.com/content/docs/DOC-3587 and https://www.youtube.com/watch?v=L7tMeKshd38. 
    I plugged my Logitech camera into the myRIO USB port. In both cases, LabView failed to recognize my Logitech camera. However, in both cases, it was able to use the integrated Webcam in my laptop to acquire images. When I disabled the integrated camera, it did not find any camera. 
    Here is a screenshot of the error when I disabled the integrated camera:
    However, when I look at the MAX, the Logitech camera appears and is able to acquire images:
    David York

     
    yorkdav1 wrote:
    I am trying to use myRiO to acquire video using a Logitech HD Pro Webcam C920. 
    I am using LabView 2013 and have the NI-IMAQdx 4.2.0.3.0 software installed on the myRIO. 
    I have tried a couple sample programs: https://decibel.ni.com/content/docs/DOC-3587 and https://www.youtube.com/watch?v=L7tMeKshd38. 
    I plugged my Logitech camera into the myRIO USB port. In both cases, LabView failed to recognize my Logitech camera. However, in both cases, it was able to use the integrated Webcam in my laptop to acquire images. When I disabled the integrated camera, it did not find any camera. 
    Here is a screenshot of the error when I disabled the integrated camera:
    However, when I look at the MAX, the Logitech camera appears and is able to acquire images:
    David York
    David,
    Have you tried deleting your "session in" control & recreate it? I have come across situation a while back where the control did not get refreshed with latest values from Max and it gave me pretty much same errors as what you see (I believe it was due to a small name change of the resource which did not get refreshed in the session control).  I say that because you mentioned camera resource getting detected properly with Max & working. Doesn't hurt to give it a try...
    -BTC

  • Disconnected USB Camera Displays in MAX

    I have a USB camera that shows up in NI-IMAQdx devices in MAX even after the camera is disconnected.  MAX displays the camera serial number.  When Grab is selected, get Error 0xBFF6901B timeout.
    Any ideas??

    Thanks for the update.
    -Does MAX give same error when camera connected?
    -What are the acquisition parameters?(Post screenshot when error occurs).
    -I am not sure of this. Might be MAX database got corrupted and resetting it might solve the problem. Ref following link to reset MAX http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • Camera detected in MAX but not found in Labview

    Hello,
    I have a Thorlabs USB camera (DCC1645C). I have installed the drivers, and MAX is detecting the camera but when I try to open the camera with NI-IMAQdx, it doesnt appear. I have also tried to open the camera with NI-IMAQ but I wasn't able.
    If I try with Vision Express/Vision adquisition, the camera is displayed, I am able to select it and configure the camera adquisition, but when I execute the program there an error: "camera not found".
    It would be great some help.
    Thank you
    Solved!
    Go to Solution.

    Hi,
    What is your LabVIEW version, your Vision software versions and iMAQdx version?
    Since Thorlabs is using USB 2.0, you can read about the USB 2.0 section of this link: http://digital.ni.com/public.nsf/allkb/4331B4AA3AE95233862574C200539A2F 
    Check if you have the required iMAQdx driver and its compatibility with your other NI softwares: 
    http://digital.ni.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850
    http://digital.ni.com/public.nsf/allkb/4A127014CA6E006B8625787A0066D329
    http://digital.ni.com/public.nsf/allkb/244E6DDF9A92A6CD8625730100629047
    NI IMAQ for USB Cameras:
    http://www.ni.com/example/30030/en/
    Thanks 
    Warmest regards,
    Lennard.C
    Learning new things everyday...

  • I am trying to upload a photo from my camera roll to a forum. The maximum size allowed is 390.6 kb. I figured out the emailing reduction to myself but cannot email upload to the forum I want to post to. Thanks

    I am trying to upload a photo from camera roll to a forum. The forum states the max size is 390.6KB. I figured out how to reduce photo size for emailing but cannot email the forum, any pointers. Thanks.

    Gramps, you are always coming to my rescue.
    Okay, I loaded the page under a different name http://abilityaxis.com/test.html. Viewing the source code doesn't show the yellow.
    For demonstration purposes I copied a small amount of the text and changed the colour of what is yellow in Dreamweaver to this pinkish colour (I tried yellow but you couldn't read it)
              <form id="registrationForm" name="registrationForm1" method="post" action="">
                <fieldset>
                  <legend>Contact Information</legend>
                  <span id="sprytextfield1">
                    <label>Name <span class="inforequired">*</span><br />
                      <input type="text" name="name" id="name" />
                      <br />
                   </label>
                    <span class="textfieldRequiredMsg">value is required.</span><span class="textfieldMinCharsMsg">Minimum number of characters not met.</span><span class="textfieldMaxCharsMsg">Exceeded maximum number of characters.</span></span> <span id="sprytextfield2">
                     <label for="businessname">(Business or Organization) Name<br />
                      </label>
                      <input type="text" name="businessname" id="businessname" />
    It basically goes all the way through the form.
    Any advice?
    thanks,
    deb

  • IMAQdx Open camera.vi Vs IMAQdx snap.vi enquiry

    Hi,
    I have an application for image aquisition and processing. initially it was set to IMAQdx snap.vi followed by IMAQdx Open camera.vi in a loop, since the application required minimum time consuming for image capturing and processing, so I put IMAQdx open camera.vi in outside of the loop, leave IMAQdx snap.vi only in the loop, it means whenever program run, open camera runs one time only, IMAQdx open camera.vi session out wired to IMAQdx snap.vi in the loop, but it was found error pop up when program runs to IMAQdx snap.vi, it shows err occured at IMAQdx Open Camera.vi. reason is camera already in use.
    Question: 1. I have IMAQ open camera in outside of loop and transfer the session out to IMAQdx snap.vi, IMAQdx 
                       snap.vi should run directly, why it still execute IMAQdx open camera.vi again?
                   2. right now I don't have IMAQdx close camera.vi in the program and I will add in later, when program
                       runs to the step of IMAQ open camera.vi, error out shows Ok and no error. so the problem is not due to
                       program without IMAQdx close camera, right?
    Pls advice. attached is the error msg. thanks
    suanleba
    Attachments:
    shows camera in use when IMAQdx snap run.JPG ‏98 KB

    If you look at "IMAQdx Snap.vi"'s diagram, you'll see it works the following way :
     - if you do not provide a Session in, it will call IMAQdx Open on cam0 and then, after acquiring an image, will call IMAQdx Close
     - if you provide a Session In, it will just acquire an image, the camera session will not be closed.
    As you are in the second case, your session id is still valid and you should not call IMAQ Camera Open in the loop.
    Anyway, calling IMAQ Snap is not the most efficient solution. You should consider using either IMAQ Grab or low level VIs instead.
    Sami Fathallah
    ALLIANCE VISION
    http://www.alliancevision.com
    Sami Fathallah
    ALLIANCE VISION
    HW and SW Components for Scientific Imaging and Machine Vision
    http://www.alliancevision.com

  • Will shooting pics of the sun hurt the camera in anyway - e.g. burn the sensor?

    Will shooting pics of the sun hurt the camera in anyway - e.g. burn the sensor?
    Solved!
    Go to Solution.

    "I generally shoot the sun as a background to a primary subject."
    That won't hurt the sensor.  Keep in mind the sensor is an electronic device.  Just like an audio amp, it can get overloaded.  Extreme amounts of light will max it out just like extreme volumn will do so for a amp.
    But remember the sensor is only exposed for a fraction of a second, usually.   It is not exposed when you are just holding the camera.
    Just a word of caution, you should never look at the Sun directly.  It is a bad idea and practice.  Don't do it.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

    I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

    When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Maybe you are looking for

  • How do I use more than one iPhone on a single iTunes user id

    Just got the family iPhones, all the phones are sending me texts back that I send to them, and my texts are going to their contacts too. We all sync to a family iTunes account. Any help would be appreciated

  • I have numbers on my iMac and my iPad. how can i get them to sync with each other?

    Help... How can I get my numbers spreadsheets to sync with my ipad to and from my imac?

  • Problem while RRI transfer to ERP transaction VA03

    Hi all, I have following problem when I tried to jump to VA03 transaction from Query Designer report. I created sender/receiver assignment with following options Sender : Query Designer report Receiver : VA03 transaction Error: SAP Web Application Se

  • 3560G and 802.1X with Cisco IP Phone

    Hi, We have been doing some test on our 3560G switch with 802.1X. The switch port has a Cisco IP Phone 7940 connected and at the back of the IP Phone is the PC (802.1X client). The PC authenticates with the computer name or the username properly with

  • Language Selection Option - Pages 5.

    Hello!    I am not to convinced about the Language Selection Options on new Pages 5. I do translations and work with different laguages simultaneously. With Pages '09 I had no problem with language. Pages 5 does not automatically detects language, ho