CAMERA SHAKE!!!! Why not Premiere? FCP has it!

So the one thing that has been bothering me to no end is the fact that Premiere has not included a camera shake preset into their library when the product ships. There isnt even a preset you can buy(that i found) for premiere pro. I dont want to use AE for one simple effect that should be included in the release.
Fcp has it in its effects tabs and its great, why not Premiere?
If anyone has knowledge of a good preset for camera shake, please let me know.
I do not wish to mickey mouse it in AE and or even in Premiere .. as i've tested them all before and nothing appeals to me.
thanks guys

I dont have fcp in front of me.. i do belive it is the earthquake effect.
Yes i know that premiere and fcp dont have the same effects, but it would be nice for premiere to include this "earthquake" "shake" effect as a preset.
I actually almost switched to fcp for this one effect(i'm not kidding), i've been premiere editor for over 15 years. I like to edit with ease and that effect is what i've been needing for a long time. If you guys look @ spike TV's UFC adverts, when the guys hit one another they do this "shake" effect and it looks amazing.
I have sent in a request for this feature, i hope everyone who reads this thread, sends one. It would be a great addition to the software.
to BDRUMMER67, i'm not sure i understand your post, you say u used a digieffects plug in to make your camera shake, which plug in did you use? Displace? I have used that one and its still not the same, doesnt have that same look.

Similar Messages

Camera Shake corrections in Premiere Elements 11

I have an interview that has several camera shakes in it. I have tried to add the video stabilizer to the clip, but that freezes all movement and continues with the audio. Everything I have researched says there should be a video warp, but I am not seeing this on PE11. Any help would be greatly appreciated as I am new at this!! Thanks

mallorykpoe
The Warp Stabilizer is a feature of Premiere Pro, not Premiere Elements (any version).
Apparently you have found the Premiere Elements 11 Video Stabilizer/Stabilizer under fx Effects in your Premiere Elements 11. (By the way, on what computer operating system are you running Premiere Elements 11?)
I would give another look at the Premiere Elements 11 Stabilizer effect, going a lot less on the settings. Often here you gain more by less than by more.
The results also will depend on the nature of your footage. And, note that a file to which Stabilizer is applied has a markedly increase Timeline render time.
There are alternative products. If you are a Windows 8 or 8.1 64 bit users, the Movie Maker will present with a Video Stabilizer that you might want to explore.
Please review and consider and then let us know the results obtained.
Thank you.
ATR

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

AT&T has great support for WP, why not VZW?

So first the Lumia 928 is released in only black and white, even though Nokia had made a cyan and red version. Why?
The Lumia Icon was ready from Microsoft/Nokia to be released in November 2013, but Verizon didn't release it until after the holiday season in February 2014 after poor marketing. Now after only 8 months, its being retired. Why?
The Lumia 930 is the equivalent of the Lumia Icon, except the 930 has been released overseas in multiple colors. Verizon only offered, again, black and white. Why?
Lumia Cyan. AT&T was able to test and release Lumia Cyan for the Lumia 1020 by August (2 months ago), for the Lumia 920 and 820 it was released early last month. No Windows Phone on Verizon has yet received this update (nor does Verizon care to enlighten us as to when we can expect it). Why?
Microsoft announced two new phones at the same time this year: The Lumia 735 and 830. It later came out that AT&T would get the 830 and Verizon would get the 735. AT&T will have the 830 hitting the shelves on Friday, November 7th. Verizon seems to have decided to postpone the release of the 735 until after the holiday season (much like the Icon). Oh and by the way, the Lumia 735 is already being released in other countries. Why not Verizon?
AT&T has not only released their latest windows phones (the Lumia 1020 and 1520) in multiple eye catching colors (just recently adding a pretty sweet green to the 1520 collection), but they update them much timelier then Verizon too.
I love the Windows Phone OS. If I have to choose between Verizon or Windows Phone, I'll end up choosing Windows Phone on a certain other carrier that actually values the OS that I prefer. I hope Verizon changes their stance before my contract ends this summer.

VZW has had a negative attitude against Microsoft devices for several years now. It seems to go back to the Kin.

Premiere pro has encountered an error, premiere does not function any more, close

Why does this application not start again.
It shows a Premiere Pro Debug Event
Premiere Pro has encountered an error.
With a path that shurely does not exists on may computer. Waht schall I do. I pay for this program an want to be productive with it.
Greetintgs Andreas

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Photoshop CC Sharpen - Camera Shake tool. Why can't I access this tool.

PS CC Sharpen - Camera Shake tool, has anybody had problems accessing this tool and has an answer to overcome the problem.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use

i am a final cut pro user and i recently started using adobe premiere pro. for anyone firmiliar with fcp, there are interesting ways of doing introductions on it and im wondering if anyone could tell me if premiere pro has preset introductions i can use.

Singenu wrote:
I tought about looking in Monitor Activity to see what happens...
Well, when I start working (should I say try to work with FCPX, activity monitor in the %processor column for FCPX jumps rapidly over 100% and reaches more than 200% ??? What the **** is that ?
200% or more is not strange. Remember that your mac has 4 cores (you say it's 3 months old, so I assume it is a new model), so 200% amounts to using 2 of these 4 cores to the max.
Regarding the question of creating a new admin user: while it sits in the same system, it may help if the problem is caused by some user-specific preferences or settings. Not likely in your case, since you seem to have reinstalled from scratch, but still it is worth a try. It takes 5 minutes and may help pinpoint the problem.

Why not to create a pause in the video camera?

Mr/Mrs
During recording a video, When we want to stop recording for a while and then continue, we have to record a new video again but we cannot do pause because there is no a pause function. So my suggestions is "Why not to create a pause in the video camera?"
Sincerely i ask you look into my this suggestion please. It would be great if you create this function into the new version of iOS.
By the way if you will have news about it please inform to me. [email protected]
Sincerely your best Apple user Ilkhom
Thanks

Refer:
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

I was wondering why the iPhone 5 has the option for a battery percentage and the iPod touch 5g doesn't? I mean... they are almost both the same thing... just the iPod does not have the phone.

One likely reason is the % battery is not that accurate because of the smaller battery capacity in the iPod compared to iPhone and iPad. Users why use a % battery app post that the % reading changes a lot.

I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

Here's basic troubleshooting for iOS:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
(Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

Hello,
Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem and apple does not adress this.
Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
Regards

Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

That is your answer then.
Large is 960x540
Medium is 640x480 (or 720x480)
Mobile is probably 480x272.
It is offering you the sizes that make sense given the size of your source material.
As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

Bridge won't allow me to open Camera Raw because a qualifying product has not been launched, any suggestions?

Bridge won't allow me to open Camera Raw because a qualifying product has not been launched, any suggestions?

Actually, it may be more to it. I just wasted good 7 hours on the issue: I transferred a big external drive from old WinXp system to my new W7 system, and faced the ownership mayhem ever since.
No matter what I did to the Volume Owner, Files Owner and attributes, recursive Directory Ownership jobs enduring tens of minutes at a time, nothing helped really.
Because you might have one more issue:
Use "Folder Options", either from Tools menu in Explorer, if menu shows, or via Control Panel.
Click on View tab, and find the box for "Hide protected operating system files (recommended)". Ignore that recommendation, uncheck.
Go now to the root directory of your troubled drive and you will see a hidden file "System Volume Information". This can be the "bad guy." Ensure that you have access to that file using the Properties / Security tab in a customary fashion! In my case that file was "padlocked", a small lock icon was placed over the folder icon to indicate that.
Only once I changed that, I was able to access the LR catalogs as a regular user. And only than LR was finally able to access existing previews and to display the grid image icons!
Ugrh.... Windows, the "personal computer system" is a mess, a labyrinth of convoluted intertwined dependencies, maybe created in competing departments and piled up atop of each other in an unseemly fashion. Compared to Unix and its derivatives it is a nightmare, which is a part of our lives for decades already.
I think that all the Apple users are now double-happy to have made the transition, when they see such "problems."

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

CAMERA SHAKE!!!! Why not Premiere? FCP has it!

Similar Messages

Maybe you are looking for