Camera shot lists not exporting to the schedule

Very confused about not finding the camera shots I have established turning up in the schedule, this is critical for me as it best guages how I am to allow for setup times between shots. Please can someone help me abpout approaches in doing this or at least how I might export a list of these Camera shots I have logged in.
Thanks

Ahh I see, interesting that this takes a bit to retrieve, as a Director, DOP, cinematographer or even producer this could be a very simple change to the schematics of a basic shedule that would improve Adobe story immensly. Having the basic tasks Story already achieves is of course profoundly usefull particularly as far as data entry is concerned but as I said, working with one camera, planning a shoot day with various setups (i.e. with camera shot angles) is crucial.
Thus far I'll probably use the initial spreadsheet data to build a more comprehensive shooting schedule outside of Adobe Story. I see so much potential with this software, will Adobe keep investing in this software to achieve these additional functions, do you see my point on this or is what I'm asking for irrelevent to the future of this software? Or would you see a different way of approaching what I'm asking for in relation to shooting with one camera?
Thank you
Josh

Similar Messages

Data is not exported by the FD : GUI_DOWNLOAD in background.

Hi all,
Data is not Exported by the program scheduled in background by the FD "GUI_DOWNLOAD"
its only exporting into the excel sheet and notepad in foreground.
Plase me out how should I follow the process.
Thanks & Regards,
Rajeev

You can write data to Application server in background. For path of file on Application server see TCode AL11
e.g.
file = '/tmp'. "Path
concatenate file '/itab.txt' into file.
open dataset file for output in text mode.
if SY-SUBRC = 0.
write : / 'File opened on application server' .
else.
write : / 'Unable to open file on application server'.
endif.
loop at itab.
    transfer itab to file.
endloop.
if SY-SUBRC = 0.
    write : / 'Data transfer to file on application server complete.' .
else.
    write : / 'Unable to transfer data to file on application server.'.
endif.
close dataset file.
if SY-SUBRC = 0.
    write : / 'File closed on application server' .
else.
    write : / 'Unable to close file on application server'.
endif.

Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
This may help use diagnose this issue and your other thread's printer issues.
Thank you,
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

In the photos app I have 2 camera rolls and 1 photo gallery. Each new photo that I take gets stored in one of the camera rolls, but when I back up the photos to my computer it only backs up the one camera roll, and not any of the new picks. Please help

In the photos app I have 2 camera rolls and 1 photo gallery. Each new photo that I take gets stored in one of the camera rolls, but when I back up the photos to my computer it only backs up the one camera roll, and not any of the new picks. In the one I backed up I have 500 plus photos and the other over 1000. I need to back up the 1000 one- camera roll. Any help would be sincerely appreciated. Help .... Please

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
- Reset all settings Already sugested
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Ligh

I have just updated to LR5. I also have a new Camera. Nikon D800. Trying to import directly (from camera) into LR. But unsuccessful. Getting the following message. "The files are from a camera which is not recognised by the raw format support in Lightroom." How can I import please?

Hi,
I assume you mean the Nikon D810 because D800/800E support has been there since Lightroom 4.1
Currently, because it is a new camera (D810) the only support is in a RC of ACR 8.6 for Photoshop CS6 and CC, as the RC runs out on 31 August it is expected support will be there in the next dot release of Lightroom.
Current limitations are that only full sized NEF is supported.
If you wish to import to Lightroom 5.5. you will need to download the DNG Converter v8.6RC and convert the NEF files (full size RAW ony) to DNG then import into Lightroom 5.5

Bakup did not start at the scheduled time?????

Hi all
Yesterday I scheduled my backup as usual at 1:00am and to my surprise the logs showed me that the backup was started at 9:30am in the morning............
In the morning when I tried to login I could not, I saw the status of the database it was shut down so I manually started the database which caused the backup that was started at 9:30am(which i could not see that it was running) terminated with errors.....................
Can any one please tell me how come the backup did not start at the scheduled time. However the backup of the next day was sucessfull.
Regards
Mahesh

Hello Jaipal,
I suspect that an 'sapdba' session or 'brspace' session was active on the OS level.
Some user must have kept this session active knowingly or unknowingly.
The offline backup was waiting for the active session to complete / end.
The session probably was ended / terminated around 9:30 am
(Maybe the user terminated the sapdba / brspace session at 9:30 in the morning after resuming the office work)
The backup started as soon as the sapdba / brspace session was terminated / ended.
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i>

My camera will does not appear in the drop down for importing videos even though it is listed as a supported camera - sony hdr-xr260

I am trying to import video footage from my sony camera on to imovie. The camera does not appear on the drop down when i connect it to the pc via usb. Anyone any ideas?

I'm using a zr500 via firewire and it doesn't recognize it either. Are you using firewire?

How can I create a "Camera Shot" list report?

Adobe Story allows you to annotate a script with "Camera Shots", but where is the facility to index and print these out as a list?

Sorry I didn't explain the 'camera cards' report in my previous post. Below are the steps to generate one from a Script. Though I am not sure if generating this report will solve your problem or not.
'Camera Cards' is just the name of that report. When you run that report on a script, it will list out its 'camera shots'.
To generate the 'Camera Cards' report from a script, you can try the following steps:
- open the script
- click on the reports button and select 'Camera Cards [Script]' from the drop down.
- Click on Generate button to create the report
This report will then list out the 'camera shots' of a particular camera number in each scene.
e.g. in the screen shot below, the first page of this report is listing out the 'camera shots' of scene 2 that have camera number '1'

Discover Plus - Export to Text Tab delimited is not exporting all the rows

Hi gurus,
I am trying to export a large data report which has 1 million plus rows to text tab delimited. The export takes 9 plus hours to export and the data is not more than 100000.
My question is
1. How can I make the discoverer to export it quicker or rather faster to tab delimited.
2. Where can I change the number of rows to be exported.
Any help, suggestions is appreciated.
Thanks,
SAI

Hi Rod,
Yes. The text tab delimited export is taking lot of time. The total rows for this report are nearly 1 million. If I break down the report with condition and export it I was able to export it ( three files exported with 212000, 103000 and 687000 rows respectively).
But I m still having problems exporting it in one shot. Is there any way I could resolve this? Please let me know.
Thanks,
SAI

TS4006 The camera shutter will not open and the camera screen is black front and rear ipod 4, tried force quit and reset, help?

The camera shutter will not open sometime and the camera screen is black. It seems to open as if were switching to the rear but that also appears black? i have force quit the app and hard/soft reset, help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Sharepoint 2013, MS Project 2013 - Task List not updating when the project file is changed

Hi
I have created a SharePoint task list and timeline from a MS Project 2013 file on my PC. I have then created a new Project file from that task list which then places the new project file in the site asset folder and provides me with a synced copy. I now
only use the SharePoint copy of the project file in my MS Project as any change I make to the project file should be reflected in the Task list and vice-versa
However if I add some tasks into the middle of the project with MS project, the SharePoint Task list is not updated to show these additional tasks. If I open the SharePoint task list with MS Project - from the task list toolbar - the project file shows the
added tasks.....so the MS Project file in the site asset folder is correct but the tasks in the SharePoint task list is not being updated
Anyone seen this before ?
Thanks
Geoff

Hi Esben,
According to your description, the error occurred when opening the task list with the content approval enabled in Project.
Per my knowledge, when we enable the content approval for the task list, the field named Approval Status which is required will be created in the list.
However, if a project plan doesn’t contain a field that is required in SharePoint, the plan won’t sync.
The error occurs because of the required field Approval Status when the content approval is enabled in the task list, so we need to add the required field as a custom field in Project.
More information:
Sync with a SharePoint tasks list:
http://office.microsoft.com/en-in/project-help/sync-with-a-sharepoint-tasks-list-HA102828524.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

DBMS_JOB Not running for the scheduled time, but run with .run fucntion.

Hi all,
I am executing a job every 15 minutes which have to delete the rows created in every 30 minutes.
========================================
Jobs Submitted as -
begin
sys.dbms_job.isubmit(job => 202,what => 'del_test_info_p;',next_date =>sysdate,interval => 'sysdate + 15/1440');
commit;
end;
==================================
Procedure that is running in Job -
CREATE OR REPLACE procedure del_test_info_p is
cnt number;
begin
select count(*) into cnt from test where ((created_at+30/1440)<=systimestamp);
update jobcount set cnt=cnt+1 ;
delete from test where ((created_at+30/1440)<systimestamp);
update jobcount set cnt=cnt+1 ;
commit;
dbms_output.put_line (cnt ||' ROWS DELETED');
end del_test_info_p;
=====================================
PROBLEM - Job is running in every 15 minutes as per user_jobs but rows are not deleteing from the test table whose created time is more then 30 minutes from systimestamp. Even the views are not having logs of any job run.
Checked the queries and run the job Manually using dbms_job.run.. gives correct output and deletes the row.
Please suggest where is the problem and how I can correct it.
With Regards
Amit Nanote

HI All,
I have found solution for this. Dont use Systimestamp in the DML's if using in a job (scheduled).
There is a statement in procedure del_test_info_p
delete from test where ((created_at+30/1440)<systimestamp);
Here usage of systimestamp restricting that procedure to execute.
Create procedure as -
CREATE OR REPLACE procedure del_test_info_p is
tstamp timestamp;
begin
select systimestamp into tstamp from dual;
delete from test where ((created_at+30/1440)<tstamp);
commit;
end del_test_info_p;
Thank You.

Firefox 8 puts new tabs opened from links in another tab at the end of the tab list, NOT next to the tab it came from like in V3.6. I want it next to the tab it came from. How do I get it to do this?

Question as stated, sums it up. When I click the mousewheel on a link in a tab I want a new tab open with that link and I want it next to the tab I clicked the link in just like Firefox V3.6 did. Firefox 8 is always opening the new tab at the end of the list and boy is this annoying!
Please tell me how to fix this.

type in the address bar '''about:config'''
then press the button '''i'l be careful i promise'''
then type in the bar '''browser.tabs.insertRelatedAfterCurrent'''
then '''Right-click''' click on it, and select '''Toggle''', and you see changing the value from True to '''False'''.
exit firefox and restart.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Video clip did not export in the Slide show

I recently created a photo slideshow in Aperture for my grandmother's funeral. I exported it as a movie to play through apple tv but when it played the slideshow, the video clip was not there. When I preview the slideshow in Aperture, its there and it works. But it did not work as an exported movie. any suggestions?

My friend gave me his presentation into which he wants me to embed video clips of him talking on each page. The video clips will be made in Photo Booth when he comes to my house. I have made a practice video clip of myself with Photo Booth and see how there might be problems, and if so, what can I do?
The pages were initially text and graphs made in Excel and then placed into his PC Powerpoint program. Then I put that Powerpoint presentation into my Keynote program and thought that all was going well with my transitional devices and first and second page created in Keypoint.
Alas, the problem now is that I can get the original page to show up, and I can get the little video clip to show up, but I don't know how to make the window stay open until the video clip ends (when he finishes speaking to the page).
Do you have any thoughts about what I can do? Should I record him on the iMac's video cam rather than Photo Booth? If so, that's going to be new for me, since I have had this new iMac for only two weeks now.
~ Lorna in Southern California

Telephone Call List not showing in the T.Code - CRMD_TM_CLDIST

Hi Experts,
We are working in SAP CRM- ISU project in which we need to transfer the telephone call list to CRM .When we execute the transaction code CRMD_TM_CLDIST in CRM,system does not show any call list,as in ECC system is reflecting one call list successfully transferred(No of lines for processing 1)
We have executed the transaction FPVT to transafer the call list to crm system but crm system is not showing any call list under transaction code CRMD_TM_CLDIST.
Please share your input as how telephone call list will be displayed in crm system through ECC.
Thanks
Warm Regards
Vineet Joshi

Hi Sap,
We are triggering the dunning process in SAP ECC, there when we excute the transaction FPVT after entering all the details & click on execute then in ECC,system shows that (No of lines for processing 1).
We need dunning customers in CRM through calling list,but when we execute the T.code CRMD_TM_CLDIST, no calling list is reflecting.
I hope the requirement is bit clear to you.
Thanks
Warm Regards
Vineet Joshi

Camera shot lists not exporting to the schedule

Similar Messages

Maybe you are looking for