Camera Stop Working and Appear Pink Screen
I've bought my iPhone 5 last year by the month of May, for the first few months, my camera randomly appear blue screen when i tried to take photo. But i ignore it as it doesn't occur often.
Recently, it happened for numerous time and the sometimes the camera wouldn't load and stay black. When i'm trying to take a picture, half of the screen went purple and I can hear clicking sound from the lens and it restarted.
What shall i do? Should i take it in the Apple Centre or is a common problem?
P.S. My phone felt extremely hot when i'm using camera. My dad and my sister iPhone doesn't have such problem.
I've reset and restored my phone but the problem still occur. It doesn't always happen but I managed to snapshot the problem twice.
Similar Messages
-
Found my old phone and updated it and now my camera and flash stopped working. Worked fine in 7.1.1. Done everything from restoring to hard resets but nothing works.
Hi hardikfrompooler,
If you are having an issue with your iPhone's camera not functioning, I would suggest that you troubleshoot using the steps in this article -
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Sincerely,
Brett L -
Bridge 'get photos from camera' stopped working and Bridge won't recognize my DNG files anymore
So, I've got Bridge set up to get pictures from mem.card whenever I insert one in my laptop (win. 8.1). A week ago I installed Sony's PlayMemories. Without asking me it hijacked Bridge's task of getting pictures from my cards. What's worse, I tried to fire the 'get photos from camera' function manually from Bridge. Bridge starts working, but nothing happens. I uninstalled PlayMemories and reset Bridge, also told my laptop to run Bridge whenever I insert a card. Still nothing happens and I still can't get the 'get photos' function to run manually from Bridge. Anyway, I can still rund the DNG converter to get my pictures, but today Bridge won't recognize my DNG files - worked fine yesterday. I downloaded CS6 from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the installer, but it doesn't seem to do anything. Maybe I need to do a full uninstall off CS6 for it to do anything..? Anyway, if any of you guys could help me with my Bridge/CS6 issues I'd be grateful. I've got 3 sets of concert photos and a snowboard comp. shoot I need to finish this week
CS6 running on windows 8.1Re-install of PS CS6 resulted in the following errors:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
ERROR: DF024: Unable to move file at "C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{C41A769E-27ED-44F7-8A11-F2E32F538E05}\_249_92e651345849 4a10e8de711f4c5be8e5" to "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Proximity\11.00\araphon.env" Error 1392 The file or directory is corrupted and unreadable.(Seq 251)
ERROR: DW063: Command ARKMoveFileCommand failed.(Seq 251)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Linguistics CS6 x64: Install failed
This doesn't really tell me much, anybody else got a clue what this is...? -
Hi there, since I installed Mavericks, when I am having a video conference with Facetime, and I maximize its window, the other person stops seeing me (my camera turns off.
Is this a bug? or do we have any solution to this annoying issue?
Thanks!Hi cpfrances,
Thanks for using Apple Support Communities. This article has some steps you can take to isolate and troubleshoot the issue with your built-in iSight camera:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Cheers,
- Ari -
Video (Camera) stops working after a few seconds (Windows XP)
On starting a video call on Skype, the person I am connecting with can see me in the video. I cannot see them - only a still picture. Then within a few seconds the camera stops working, and a line appears through the camera icon. Skype suggests that there is another application using the camera - but there is no other program using the camera. The camera remains unusable until I quit Skype and restart it... but once again it will only display my video for 4 or 5 seconds. The camera is a fairly new Logitech HD webcam C525, and the computer is running Windows XP. Skype reports that it is the latest version of the program. Any help gratefully received!
Hi again
You said you have three buttons on the slide with two of them
configured for "No action"? Why? What is their purpose if you are
doing nothing when they are clicked?
You also said the buttons aren't pausing. If the buttons
aren't pausing the slide, it is probably simply playing and ending.
Sounds like you are expecting the slide to pause, so I'm confused
as to why you removed the pause action from the buttons.
Cheers... Rick -
Hi, I was wondering what is the warranty policy. A year ago I was using Iphnone 4 s and the camera stopped working and the carier gave me a new.
I couple of month ago I bought Iphone 5 and yesterday it just stopped working.
My question is want ca I do now? Do I need to go in an Apple store or in the office of the mobile carier I'm using.
Thank youType the S/N here and see if it is indeed covered for you: https://getsupport.apple.com/ProductSelector.action If yes, take it directly to Apple and avoid a runaround. If there's any issue with coverage or any other sh*t, take it to the carrier and let them deal with it, although it will probably take longer to sort out (but you may get lucky and be handed a refurbished unit right off the bat).
If possible try connecting it to a computer running iTunes to see if it shows up. That way you can back it up and save its contents for restoring onto whatever new device you get. -
Hello!
The camera stops working. Not detected by any program (Facetime, Skype, Hangouts, Zoom). This happens usually after a few hours of work or after the computer sleeps. To make the webcam function again I need to restart.
Any suggestions?Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible? -
My iPhone's speaker next to the frontal camera stopped working what can I do?
So since today my frontal speaker next to the frontal camera stopped working and I've been having problems where when I open the camera it reboots I just haven't had time to restore to fix the corrupted file could this be responsible for my speaker not working? I have to use the loud speaker to make a phone call or I won't hear anything if I don't restore will this cause permanent damage to my phone? Plead help! Thanks!
Hello tmsipos11! That certainly sounds like an aggravating thing to occur! At this point, I recommend making sure that your iPhone 4s has the most recent software. The next upgrade is available now! If you've done so and yet still have this problem, please let me know!
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
My ipad3 is a couple of months old and the camera stopped working. When I select the camera app I get a blank screen. I can't do anything but close the app. Has anyone else experienced this? How can I correct?
Thanks,
JojoraWhen you say that you can close it are you closing the app this way?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button when you are done. -
4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?
Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
My iphone home button stopped working and the phone started getting hot. The camera also fogged up. What do I do?
I'm guessing it's a hardware problem. Your best option is to go to an Apple Store as soon as you can to try and sort this all out. While you're waiting to go visit an Apple Store, however, I'd imagine you still want to use your phone. To circumvent your hardware button problems, try enabling Assistive Touch by going to Settings>General>Accesibility>Assistive Touch. You'll see a small box appear on your screen. Tapping it will bring up several options for you to choose from, like the home button. Clicking the "Device" option will give you several options for controlling your phone that you would normally use hardware buttons for (i.e. volume, lock your phone, etc.) Hope this helps and good luck!
-
please someone who help me please
when I tgry to drop a video from the main screen to a time line with no secuence i receive an error with no number, just tell me the progran stop working and the program closesYou need to help us first ...
Computer specs:
OS, CPU, RAM, GPU, vRAM ... and also disc layout & connections can be useful (as in, "2 internal hard-drives and an external on Thunderbolt connection for exports")
Program specs:
Specific build of Premier Pro from the bottom of the "About" splash screen off the "Help" menu is best.
Footage file type: MXF, AVCHD, MOV, m2s, what?
Even the camera it was shot on can be of interest at times.
And did you use media browser to import, then project panel to drag & drop?
Neil -
Front and back cameras stopped working after IOS 8 update
My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?
Hi VictoriaViking,
Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article. (I know some don't apply to your issue.)
iPhone: Hardware troubleshooting
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Take care,
Nubz -
Since I updated IOS 7 in my iPad, it doesn´t work and appears the Apple logo in the screen all the time. Any solution?
1) Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
Problem saving PSD file in Illustrator
I have several files that I created in PSCS3. They are all simple, with two or three flat colors, one color per layer, no effects, shadows, etc. My client is having these printed in China using a type of silk screening process on mug-like items. The
-
for instance....I have a documents that has 6 pages, I can scroll down and see all the pages but when i hit the print button it will only print 2 pages. I tried to change it in the setting part but there is no feature that allows you to change it.
-
Downloading in background schduling
i have written a program which fetches the spoll request and then converting into pdf but i need to download the pdf file to local pc, how to do that will gui_download will work. here is my code. REPORT z_rfi_inv_movement_spool . PARA
-
Can not create planning function types (for process empty records)
Hi! SAP Experts, I want to copy 0RSPL_FORMULA to another function types for processing empty records, ZRSPL_FORMULA. I checked this function type via RSPLAN, there is no error!. But when i try to use it in planning modeler. We found the error
-
Hello I don't have a pc so i can't replicate the problem, but one of our parishioners emailed this to me: +"I am having touble with accessing the Parish Blog. Sometimes I am told the page is not available, and a couple of times I got a page that was