Camera stopped working, hardware I think?
The camera application starts up and it can take pictures, however, it only captures a black screen. There is nothing covering the lens. The last time I tried using the camera before it broke, I was in the camera application and the screen turned pink/purple/blue in a funky pattern then turned black. Everytime I open the camera application the lens captures nothing but black. I can save pictures and the flash icon always appears (and works when attempting to take a picture). I'm thinking it's a hardware problem? I'm not sure though. Anyone have any clue what I can do to try to get the camera working?
Thanks a lot for the help!
I'm having a similar problem. When I figure it out I'll share with you. It's very annoying. Especially when I was using the camera phone like crazy for a while there.
If you figure it out first please share!
Similar Messages
-
Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera and i have updated the new IOS.What else should I do ? Is this a hardware problem?
Looks like a hardware issue that will have to be taken to a store
-
Hello!
The camera stops working. Not detected by any program (Facetime, Skype, Hangouts, Zoom). This happens usually after a few hours of work or after the computer sleeps. To make the webcam function again I need to restart.
Any suggestions?Why does that seem likely to be a hardware issue? How did you come to that conclusion? Do you know something about this issue that indicates that? (I realise that this might sound short and rude - I am not trying to be rude here - just to understand) My thought is that conventional troubleshooting would say that this is a software issue because it is fixed with a restart.
I also have this problem. The camera quits working after some time - I have not been able to make it stop working. Sometimes it is after I suspend the computer (close the lid) other times it still works.
All I know is that intermittently my camera stops working and it is a big pain to have to reboot whenever I am going have a video chat.
Anyone got any solutions, I'm not covered by applecare so would rather try and fix it myself if possible? -
After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.
Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy -
After update to 11.2.202.228 mz USB 1.1 web cam stop working
Hi,
I have a camera from MediaTech company, it is written on it MT400 and serial number 2604050599. Before latest update it works, after install newest version of Flash Player it stop working. I tested it on http://testmycam.com as one of Adobe employee advices on forum but I have only black rectangle. On top left corner of this rectangle it is written Camera: USB PC Camera (SN9C 102) , FPS 10. I disabled Hardware acceleration but problem remains.
As I remember this camera is USB 1.1. Does new Flash Version support USB 1.1?
I have checked on Device Manager on my Windows XP Home Edition 2002 Version with SP3 device driver version it is written:
Manufacturer : Sonix
Driver date: 2004-04-02 (I can't find newer drivers on web )
Driver version: 4.6.6.1
Is it bug or Flash Player stops supporting such devices?
RegardsI pressed Allow, before pressing Allow background was grey, after Allow
it gets black. I see the name of this camera on list. I also try another
camera from Logitech (I can't remember what name was it, but one of the
newest) and everything works which suggest it is strictly related with
this specific camera which I'm using.
Regards
W dniu 2012-03-31 08:39, Nodster pisze:
>
Re: After update to 11.2.202.228 mz USB 1.1 web cam stop working
created by Nodster <http://forums.adobe.com/people/Nodster> in /Using
Flash Player/ - View the full discussion
<http://forums.adobe.com/message/4304094#4304094 -
After updating to IPS 7.1.1 my camera stopped working, it's just a black screen.
Hello Darth Evans,
The troubleshooting steps below can help get your iPhone's camera working again.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
My wvc80n camera stops working all the time & I have to unplug it to make it work. It happens about twice a week now.
I dont think vibrations would cause the camera to stop working.
What other devices do you have in the network? Which router do you use and how far is the camera situated from your router? Do other devices, like wireless computer also get disconnected from the network? -
Front and back cameras stopped working after IOS 8 update
My front and back cameras both stopped working after i updated my phone to the IOS 8 software. Does anyone know why this would happen or any way of fixing it?
Hi VictoriaViking,
Not sure why your cameras stopped working with the update, or what the exact symptom is (black screen, no response...), but please check out the Camera troubleshooting section of this article. (I know some don't apply to your issue.)
iPhone: Hardware troubleshooting
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Take care,
Nubz -
My iPad fell and the back camera stopped working, please help me out, thanks,
If it doesn't come back after you restore the iPad, it sounds like you've damaged the hardware, you'll need to take it to Apple or an authorized service center.
Matt -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working
I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
usbccgp Microsoft USB Generic Parent Driver c:\windows\system32\drivers\usbccgp.sys Kernel Driver No Manual Stopped OK Normal No No
usbcir eHome Infrared Receiver (USBCIR) c:\windows\system32\drivers\usbcir.sys Kernel Driver No Manual Stopped OK Normal No No
usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver c:\windows\system32\drivers\usbehci.sys Kernel Driver No Manual Stopped OK Normal No No
usbfilter AMD USB Filter Driver c:\windows\system32\drivers\usbfilter.sys Kernel Driver No Manual Stopped OK Normal No No
usbfltr Razer Copperhead Driver c:\windows\system32\drivers\copperhd.sys Kernel Driver No Manual Stopped OK Ignore No No
usbhub Microsoft USB Standard Hub Driver c:\windows\system32\drivers\usbhub.sys Kernel Driver No Manual Stopped OK Normal No No
usbohci Microsoft USB Open Host Controller Miniport Driver c:\windows\system32\drivers\usbohci.sys Kernel Driver No Manual Stopped OK Normal No No
usbprint Microsoft USB PRINTER Class c:\windows\system32\drivers\usbprint.sys Kernel Driver No Manual Stopped OK Normal No No
usbstor USB Mass Storage Driver c:\windows\system32\drivers\usbstor.sys Kernel Driver No Manual Stopped OK Normal No No
usbuhci Microsoft USB Universal Host Controller Miniport Driver c:\windows\system32\drivers\usbuhci.sys Kernel Driver No Manual Stopped OK Normal No No
uwbusb UWB Bus Control USB-Miniport Driver c:\windows\system32\drivers\usbuwbmini.sys Kernel Driver No Manual Stopped OK Normal No NoDid you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.
-
My ipad3 is a couple of months old and the camera stopped working. When I select the camera app I get a blank screen. I can't do anything but close the app. Has anyone else experienced this? How can I correct?
Thanks,
JojoraWhen you say that you can close it are you closing the app this way?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button when you are done. -
i just got my new 6350 in april. in may it was dropped in water the phone works fine, but my camera stopped working. when i push the camera button or manually go into my stuff and go to camera it just goes to a black sceen then to a blue one and says camera on standby. it won't record video either, but i can still record voice on it. anything i can do to fix it??? i know stop dropping phones in water!!!!! thanks
"anything i can do to fix it??? i know stop dropping phones in water!!!!! thanks"
buy a new one and stop dropping phones in water
If you want to thank someone, just click on the blue star at the bottom of their post -
Photo Booth Camera stopped working
When I installed the OS from the installs CD and launched the computer the photobooth built in camera turned on. As soon as I installed the files from choosing software update the camera stopped working. Is anyone else having this problem? If so how do I fix it?
Seems like a driver or software conflict.
Help????Found out that the problem occurrs when I hook my Canopus ADVC Analog to Digital box. For some reason it turns off my built in photobooth camera.
-
My mid 2013 new MacBook Air camera stopped working in all applications, facetime, photobooth and skype. It says camera not found. Does anyone have a solution for this problem? Thanks!
I have figured it out! You just have to install the new plug in to your macbook.
Download the AppleCamera.plugin provided.
Click on go in the finder menu, select go to golder and paste in /Library/CoreMediaIO/Plug-Ins/DAL/ ,
move that item, AppleCamera.plugin, to the trash
Go to your downloads folder and copy the new AppleCamera.plugin, then paste it in the folder where the old one was.
It works
Maybe you are looking for
-
the streaming feature of my quicktime program is non-functional, all i get is the Q? icon. it seamed to correlate to my trashing the newest firmware update. any tips on how i can fix the Q?... ? MacBook 13.3 Black Mac OS X (10.4.9)
-
Moved house, being billed for broadband and equipm...
We were approached by BT to upgrade our Broadband to Infinity. I explained that we were likely to move in the near future and the advisor said that we could transfer our account to the new house. I was suspicious that this would not be the case and m
-
The find object capability is useful but I do not see an intrinsic means to search code contained in "Before Create", "After Create" and "End of script" scripts? Not that I'm bashful about grepping the XML. I have been placing breadcrumb comments in
-
Unable to import table using SOA database adapter in Jdev
hi all, I am learning soa 11g development by myself which is quite exciting stuff. I am trying to build a simple flow to access database so I have dropped a database adapter in composite.xml and trying to configure the adapter. I have successfully te
-
How many Nos can I store in Favourites in IOS 6
How many Nos can I store in Favourites in IOS 6