Camera stuck with night vision type effect
My camera worked fine for a few days, but now it's stuck with some type of effect that looks like a night vision infrared mode or something. It's all green, and the luma values look like they're reversed or something. It looks that way both on the iphone display, and in the finished picture. I don't see any settings that effect the camera (there are some for photos, but not the actual camera)- do I have some sort of effect turned on, or is it broken? Thanks...
the only other thing you can try is restoring the software of the iPhone, This will wipe out the info (Only on the iPhone) If that does not resolve the issue then it will need to be serviced either By calling Apple or Going to a Apple Retail Store.
If you sync to one computer everything should still be on the computer and would sync back up.
http://docs.info.apple.com/article.html?artnum=305744
Similar Messages
-
What software do I need to download from apple to support the - Logitech Alert™ 750n Indoor Master System with Night Vision?
Thanks
GrahamContact Logitech and ask them what the system requirements are...
-
IPhone4 camera stuck with shutter closed
When I open the camera app, the camera shutter stays closed and the controls are completely locked up. Can't even switch to video. The "Camera Genius" app works except when I try to switch to the front facing camera, then the whole thing locks up and doesn't work at all. Camera also works fine with the "Pano" app. I prefer the simplicity of the camera app that comes with the phone. Any suggestions to fix this would be appreciated.
Standard troubleshooting steps in order are as follows:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restoring your iPhone with iTunes from your iPhone's backup.
Restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after the last step, your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby.
If the problem is resolved after any of these steps but returns after using one of the 3rd party camera apps that you are using, I would stop using that app and contact the app developer. -
All my apps with camera or videocams are in night vision. Help!
All my apps with camera or videocam in my iphone are in night vision. Can somebody help me?
I've tried everything to get it right again.Check Settings -> General -> Accessibility -> Invert Colors and turn this OFF. Pre iOS 6 this is called White on Black.
-
My cat sat on my keyboard and changed the display. Now the coloration and brightness looks like it is in night vision with a bit of color. It is similar to one of the photo booth effect options. How do I get it back to normal?
Hi JoeBeth,
Welcome to the Apple Support Communities!
It sounds like your colors have become inverted on your display. This is a feature of Universal Access. Please refer to the attached article for information on this feature with instructions to toggle it on and off.
Mac OS X displays inverted image colors (white on black, reverse type)
Have a great day,
Joe -
Night vision in After Effects?/ Transferring a style from PS to AE??
Hi,
I am just starting out using adobe software, Im currently doing a job for which I need a style/mask to make a video clip look like it was shot in night vision.
Is there any way I can do that in AE?
I have done it in photoshop so I have been trying to save it as a style and transfer it to AE but I'm not having any luck!
Can anyone shine a light on this for me?
Cheers
TimA Night Vision animation preset comes with After Effects.
Type 'night vision' into the search field in the Effects & Presets panel in After Effects.
For more information about animation presets, see the
"Animation presets" section of After Effects Help. -
I have been successfully downloading Aps from CC, but it is stuck at 90% on after effects. It has been stuck since last night. I am on a Mac.
Jonellel53796317 I would recommend reviewing the installation logs for the update which is failing to apply. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC. You are welcome to post any specific errors you discover to this discussion.
-
Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).
Please Help i need this phone....and i dont have the money to replace it!I havent jail broken it so its probable a hardware issue then.......well then.......
anyway thanks man
Cheers! -
My camera won't work with IMAQ vision builder
I have a Hitachi camera , and a PCI 1407 frame grabber
the camera works well in MAX under devices , but when I open the IMAQ vision builder , it not visible in the devices , and I can't open MAX from the vision builder. It's gets me that error "1074397163" at the end it has bad interface
it's not the power supply of the camera since it works well at MAX , so its like the camera's name is img0 in MAX , and another thing in IMAQ vision builder, I tried updating my softwares but nothing happened, can anyone help please ??
thanksDalia,
I think I may need some clarification on what exact program and function you are using. Are you getting this error with the Vision Builder for Automated Inspection (VBAI)? Or are you using LabVIEW and are receiving this error from the IMAQ Init.vi?
If it is in VBAI, and you are trying to acquire an image, the Devices should auto-populate in the Main tab of the Acquire Image setup. Simply select the camera and press Grab or Snap.
If it is in LabVIEW, right-click on the interface input of the IMAQ Init.vi to create either a constant or a control. If it does not auto-populate with the correct camera name as it is in MAX, "img0". Or you can change the interface name in MAX by simply right-clicking on the camera and selecting "Rename"
Can you elaborate on what you are referring to when you say "the MAX explorer won't work in IMAQ"?
Huntington W
National Instruments
Applications Engineer
***Don't forget to give Kudos and Accepted as Solution where it is deserved*** -
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support. -
my new iphone 4 is stuck with "USB connect to itunes". I put it in recovery mode last night. Itunes recognizes the phone and says it's in recovery mode, but when I do a restore, nothing changes.
it says "itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes." I click OK
then I click the restore button
Then the box says "Are you sure you want to restore the iphone to it's factory settings? all of your.....etc." I click Restore and Update
then it goes into software update
at the end of the software update it says "Itunes has detected an iphone in recovery mode...."
All this time, the screen of the iphone stays on with USB to Itunes
I might add that while the phone was in it's first attempt at recovery mode, it was accidentally unplugged.
any suggestions? -
My iphone 3g got stuck with the apple logo and loading bar since last night when i try to reset the iphone pls help thanks!
Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?
-
hi, I finally got lucky and past the "other" memory status issues when syncing. Now I'm "waiting for changes to be applied" sync stuck all night (itunes yesomite iPhone 6 plus). is this a bug? I have not had a single successful sync with yesomite.
please help. this issue prevents music from syncing. I have set the sync setting to convert songs to 192kbps AAC to save space, I figure that could slow the sync
down, but it's hanging indefinitely (I've left it for 24 hours with out it completing.)
the the only music that appears on the phone are songs purchased from the iTunes Store. 95% of my collection are rips from my CDs.
thank you for any help!Yeah it's pretty sad that $1000 phone they put out you such cheap memory It causes issues, I have iPhone 6+128 GB actually this is the second brand-new one they gave me because they keep affording it trying to act like that's not the issue because they're too stupid to know how to check what memory is in each one before they give it to me when I have told them multiple times my back up runs perfectly fine on two 5s phones and a 6 64GB of course running MLC memory.
I told them it's because just like the write ups say I have 809 apps but I have not even put all my music on the phone so I'm still running 50 to 60 gigs free and it crashes and reboots itself sometimes in multitasking and more often than it does that in between multitasking I get a black screen for 1 to 2 seconds in between apps and upon start up the Apple logo screen will flicker and do weird things, One of the genius idiots asked me if I could just delete some of my apps, really that's the answer to fix the phone the customer needs to limit the amount to apps they put on their phone, why the **** get a 128 gig if you can't put on anything you want to it guess they need to start selling them saying you can only put a limited number of apps on them, it's really is a **** joke, I have over $20,000 of Apple merchandise easily and always get the new phone every year but I'm starting to reconsider my decisions in the future because this company is starting to go downhill, The reason water not recalling the phones is because they're dealing with their top-of-the-line thousand dollar phones in this case and most people don't have over two or 300 apps so they're not having as many issues, so basically they have messed up phones they just don't know it in their hands and Apple is just too **** greedy to recall the phones, they'd rather sell customer spends that only work half ***.
Stuff like this will be the downfall of their company, all the people that stay with them because as long as you don't jailbreak their stuff it normally just works without issue will be soon jumping ship if stuff like this keeps up, because I can guarantee they got me thinking now.
not that I wanted to know or should I be expected to but I even offered for them to open up my brand-new phone and just replace the memory to MLC memory which is something I shouldn't have to do with a brand-new **** phone, they should just make one with the right memory and give me a new phone, actually just don't sell customers that buy the top-of-the-line phone from you trash ones in the first place that would be a great option.
what burns me up the most is when you talk to AppleCare and Genius Bar they try to act like the issue isn't there and they're unaware of it, they say that Apple hasn't come out with any information about it, yeah that's because they don't want to recall the trash.
Apple has became nothing better than your run-of-the-mill company, android is becoming just as good as they are sad to say this since I have been an Apple fan for so long but there is no excuse for BS like this they have been looking for options to fix my phone for a month now this is not the way you should treat loyal customers, I would've been better off keeping my 5S and in the future just switching to android.
it's pretty sad that the company has no idea how to check which memory is in their **** phone and even after I offered to let them just replace the memory in my new phone by opening up my brand-new phone to replace it they have no idea how to do that either, yeah Genius Bar sure, I think that should change the name to idiot bar and Apple don't care instead of Apple care. -
I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
Try updating my ipad 2, pop up with error 1602 and now my ipad is stuck with the itune and USB icon on the screen. I tried to restart it, but screen still comes up the same.
See if this page helps http://support.apple.com/kb/TS3694#error1602
Maybe you are looking for
-
How to search a file from a hierarchy and delete it
hi , i have to delete a file from a directory structure .i dno't know where is file stored in my folder hierarchy .i have to search that file and delete that file . for example ; i have a folder name A , which have folder B ,C ,D ,E . B folder have o
-
Hi, please advise on why is that my code only shows red "omg" than to gray and it stopped.I would like to make it blink red, gray, red, gray, red, gray continuously. Please give any comments and guide along.Thanks public class Alarm extends JLabel
-
Notification performance in OAQ
Hi, We have a number of listeners on Oracle queues, some Java, some PL/SQL. When we post a message, there is always a slight delay before the listener is notified - i.e. 2 or 3 seconds. Is there any way to reduce this latency? I have set jobqueue_int
-
I cant download Adobe Acrobat Pro an error message saying Error 1935 error occurred.
How can i use the program or how can i get a refund?
-
Installed my printer two days ago and can't get it to print. Been a while since I installed a printer and this is the first under ARCH. Cups is running and my printer is detected. Any help would be greatly appreciated. If anyone needs more info just