Camera to capture ID Photos with Live View tethering and Inexpensive.
Need suggestions for a relatively cheap webcam or point and shoot camera I can hook to the MBP and control it with live view functionality. Needs to be able to take a stills suitable for ID Photos for a printed conference ID. It would be nice to be able to crop the image before saving it. This image file will be dragged into a FMP image box and the ID printer vis FMP. iSight is too low rez and can't be flipped over to capture away from the keyboard.
some in http://www.mac-compatible-web-cam.com should be able to meet your needs for cropping (zoom.)
A Mac compatible tape based, Firewire connected, miniDV or HiDef camcorder would be ideal and would not require any software beyond what comes with your OS X Mavericks (10.9.)
Similar Messages
-
Help with Live View - Links Not Working
Hello,
I am having a problem with Live View. It had been working just fine, until recently. Now, when I load a site stored locally, the page looks normal and links highlight when I cursor over them, but when I click them no navigation takes place. I just remain on the index page. The site does test fine in IE8, Chrome, Firefox and used to test fine in Live View. The same happens with all my sites. No changes have been made to my system. Maybe I changed a setting unknowingly? Is there some type of setting that I am missing perhaps? Any help would be appreciated.
JasonDid you close and restart DW to see if that helps?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
Help with live view new camera options...
Hey guys...I have recently bought a hahnel remote shutter release so that I can take pics on the top of a mast around seven metres up.
I have a 5 inch monitor at ground level to view the pictures taken, using an av cable from the camera. Problem is, I cant get a continuous "live view" image on the monitor, as you need to hold down the * button whilst in live view to auto focus, so I have to put up with just the shot thats been taken showing up after each shot instead!
Does anyone know of a canon that would offer a continuous live view image on my monitor, without having to press the * button to auto focus?
Ideally it would be one from the list below, as they are the cameras that my new hahnel wireless remote supports!
I hope someone can help! cheers!
List of supported cameras...would any of these offer live view without the need to press * to autofocus and take a shot:
Compatible Camera Models:
EOS 1200D / 1100D / 1000D / 650D / 600D / 550D /500D / 450D / 400D / 350D / 300D /
70D / 60D / 50D / 40D / 30D / 20D / 20Ds /
10D / 7D / 6D / 5D / 5D Mark II / 5D Mark III
1D / 1DX / 1DC / 1Ds Mark III / 1Ds Mark IV
SX50HS
Powershot G10 / G11 / G12 / G15 / G1X Mk II
Pentax Pentax K-5 II / K-5 IIs / K-5 / K-7 / K10 / K20 / K50 / K100 /
K200 / K500
Samsung GX10 / GX20What camera are you using? Most "modern" Canon SLRs allow you to set focus during live view. You move a little rectangle around to select your focus area. But you need more than a monitor, you'd either need a computer (like a small netbook) running EOS Utility, or a tablet with DSLR Remote or equivilent on it. The 70D and 6D both have WiFi ability, so you can do it from a smart phone, tablet, or computer, no wires needed.
-
Problem with Live View on MKIII
Today, I was shooting in manual mode and using live view to focus when it suddenly stopped working. It sounded right, but nothing on the LCD. After I finished my shoot, I played around with the camera and it would work in aperture priority but not M. Also, if I flipped to video mode, live view only worked in Av. Played around with settings and I turned off Exposure simulation and it started working again. Batteries showed plenty of power.
Any ideas?Ok, looks like user error.
I was shooting with strobes. I did have EC at -1. Also, yes it was set up for flash so I'm assuming it was way under. Thing is, first couple of shots, I swear it was working, but maybe between changing ISO and aperture, I had enough light to focus with the modeling lights on. I'll play more tomorrow and figure out what I was doing wrong. I was hoping it was user error and it looks like that was the case. -
Tethered shooting with live view?
Tethered shooting with Nikon - does the actual Lightroom version support LiveView or do I need additional extern Software like Nikon Camera Control?
Live view via Lightroom is not currently available.
-
Problem with Live View being slow
Since the latest update it now takes up to 20 seconds for the live view to appear in Dreamweaver. Is this usual - anyone else having this problem, How can I solve it? it's like working in mud!
It may just be a temporary issue on their server. That's one of the main problems with referencing files you don't own, you are at the mercy of the owner's server status.
If you can, I would suggest getting a copy of the font files you are using and keeping them on your own server to reference instead, it may cost you extra, but it's worth it.
To be honest, I've never used Typekit and don't even know if that's possible, but I've had similar issues with Google Fonts in the past and will download fonts to be stored on my own systems now whenever it's critical that they are available whenever the website is (doesn't happen often, but).
You just need both a .ttf and .otf version of the font to ensure it works when using the @font-face css rule. Converting a .ttf to .otf is pretty simple and can be done in a lot of places online. You would need to check with Typekit's user agreements to see if that's possible, but Google's are all open source and can be modified however you see fit. -
Is there a way to use live view while tethering with a Canon EOS 1100D ?
The Canon Free EOS Utility does have this functionality. Appstore's Smart Shooter does have it too! Why can't find this in Aperture?some in http://www.mac-compatible-web-cam.com should be able to meet your needs for cropping (zoom.)
A Mac compatible tape based, Firewire connected, miniDV or HiDef camcorder would be ideal and would not require any software beyond what comes with your OS X Mavericks (10.9.) -
Ken Burns photos ~ pan photos with interest at top and bottom?
Hello ~ anyone know how to manage a "long skinny" photo without showing it in "fit" ~ with the black around the edges? I want to Ken Burns them because they are important - but stuck with the pan from the shoes to the head, or the reverse. Love the Ken Burns but it is really limited with that type of Photo. Thanks!
You can add black around the edges of vertically oriented photos with an Automator action called "Pad Images". This has the advantage of letting you batch a lot of photos at a time. You could also add the black space in an application like PhotoShop.
If you need help with Automator, [see this thread|http://discussions.apple.com/thread.jspa?messageID=10702816�] -
No sound with Live! 24bit and Boston Digital BA735 speak
I can get no sound with Soundblaster Li've! 24bit PCI card and Boston Digital BA735 speakers. Other speakers work. The Boston are 2. speakers (with subwoofer) from an old Gateway I have. Tried digital output only and without digital output only checked but no luck.
hey bro. today i had the same problem you have, with the same speakers and all. and thanks to your post, it somehow inspired me to figure it out. so this is what you do:
) make sure your sound card is set to digital output. if you dont know how to do this, follow the windows help program.
2) go to gateway support website at http://support.gateway.com/support/d...0406&type=0096 and download the Digital Soundblaster Li've basic driver (752042.exe) near the bottom.
3) double click the icon once it downloads and it will do its thing
good luck dawg and thanks for your ingenius question -
Flickering problem with live viewing with IMAQ Image Display
Hi everyone,
I am trying to write a program to do live imaging with Andor camera. I am using some examples from Andor. The images are acquired in sequence and send into IMAQ Image Display and also Intensity Graph. There is minimal flickering issue in the Intensity Graph but there is very bad flickering problem in IMAQ Image Display. Perhaps I misunderstand how to optimize the vision tools. Does anyone know how to overcome this issue? I have attached the code that I am testing. Thanks in advance.
Best regards,
Han Yen
Solved!
Go to Solution.
Attachments:
iXonRTA_live_0.0.1.vi 70 KBYou can use Vision Assistant to test our vision functions. Vision Assistant is really meant to prototype - it does not have all teh functionality of Vision Development Module and is not as flexible as we don't allow you access to all the settings for every function.
I recommend starting in Vision Assistant and then porting over to LabVIEW or C (whatever you are most comfortable with)...this is built-in functionality. There is nothing wrong with using Vision Assistant to do live imaging, just that you run into limitations and you will only be able to use this code on computers that have Vision Assistant.
Hope this helps.
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision -
Image Capture duplicated photos with iOS 8.1
Image Capture is displaying duplicated or even Triplicated photos when connecting an iPhone with iOS 8.1.
The photos on the iPhone are fine. I am using Mavericks.
Thank you.I reinstalled iOS 8.1 on my iPhone using iTunes (restore), and the problem is solved.
-
Problems with Folder view settings and file association in Windows 8.1
My Windows 8.1 64 bit started forgetting the view settings from a folder.So if I go in a folder and I set it to List-View for example,whenever
I close that folder and I reopen it the view is set automatically to Details view.And this applies to every folder in my computer except Desktop.It drives me crazy,especially in my pictures folders.
Also with this problem another one came.I can't set a program to open some files,so the file associations for some files is broken.For example
i can't set qTorrent to open torrent files.It just won't open them and the files apear as white documents just like I hadn't had a Torrent program installed already.I find it weird that both problems appeared together.
I previously had to reinstall windows on my machine,because of this problems.It worked normal at the begging,but today these problems appeared
again.
I tried scanning SFC
Scan with no result.
I hope I will get a fix here.
Thanks.
Update:I also just discovered that Metro apps are not working...what the heck its wrong with my windows.Hey thanks for the reply ,but I got a fix for everything.Apparently the problem is in the registry.
So If the problem began recently, you can try this to fix it :
Press Windows Key + R to show the Run box, type RSTRUI and press enter.
Choose a recent date and time from before the problem beginning (such as the day before yesterday) and click Next.
The system will restore registry settings from that day, and restart.
If you do this however,all the programs you had installed after the restore point date will
be DELETED (same with any settings changes made before that date),so be sure to backup things.Hope this will help someone someday. . -
I go to take a photo and the camera either shows repetitive blurred image or is just black. The entire iPhone 6 128 is locked in the camera freeze. The only way to use the phone is to shut off power and reboot. Is anyone having this problem on the iPhone 6?
i have been having the same problem today. I have however narrowed it down further: when I am zoooming in on a shot, take the shot, then slide to another mode like from a still shot to video (without uzooming),= freezing. I am taking my iPhone back to apple to see what they say if I don't an answer on the forums here. Not happy with this btw!
-
Problems with Live Update 3 and Core Center
Hi All
I have just put together the system listed below. On the first boot-up screen "Live Update 2" is displayed on the top right of screen. I installed "Live Update 3" from the Drivers & Utilities CD supplied with the Mobo. On rebooting, the computer crashes straight after loading Windows. The problem occurs even after I downloaded the latest version.
I also installed Core Center from the same CD. This works fine until I try to switch user. It then comes up with the error "No Hardware Monitor Found" and crashes. The same thing happens after downloading the latest version.
What could be causing this?
Many thanks.Upgrade BIOS and see what happens...
-
Photos with airplay is slow and unreliable
Using airplay to display photos on my ATV2, I find that switching from photo to photo can sometimes be slow, or it could just freeze and not respond. Any suggestions? I've tried it with airport express network, would extreme work better?
Hi,
Tap Settings in your Home screen then tap General / Reset / Reset Network Settings.
Restart your iPad.
Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
Try ATV2 again.
If that didn't help, try the Extreme.
Carolyn
Maybe you are looking for
-
DBMS_DATAPUMP; how to get the log file of a job?
Hi I want the user to be able to see the logfile of his job from another session. this is my procedure create or replace procedure get_job_log (p_job_name IN varchar2 ) is hdl_job number; l_job_state VARCHAR2 (20); l_status sys.ku$_Status
-
Need Target File Name Timestamp is same as Source File name Timestamp
Hi , I want to genereate Target file name (Target_09062008082030.xml) but this time stamp is exactly Sorce FileTime stamp..(Source_09062008082030.xml).. so, i want to create a target file with the same source file time stamp.. for t
-
I have numbers installed on both my iPhone 4s and my ipad1. Using my PC I uploaded a spreadsheet to iCloud no problem. I can access the spreadsheet from my iPhone but not the iPad. When I check the settings for numbers on my iPad the 'use iCloud' is
-
Preloader is now centering although horizontal and verticle slider are showing up.
preloader is now centering although horizontal and verticle scroll are showing up. M y question is how do I get rid of the horizontal and verticle scollon the man page now that the preloader centering code has been added in to the edge file from drea
-
How to find the customer exits for a particular transaction
hi how to find the customer exits for a particular transaction