Camera-to-computer cable for PowerShot A1100 IS

need reeplacement camera-to-computer cable for PowerShot A1100 IS -- not available on Canon website -- not available from Office Depot where I bought the camera
Solved!
Go to Solution.

Hi watson1943!
Thanks for posting!
The specific cable that came with your camera is currently unavailable on our website.  However, the cable is a standard type of cable that can be found almost anywhere.  As long as one end has the full size A-type connector and the other end has a mini B-type connector, it should work.  You may try any of your local electronics retailers to see if they have such a cable in stock.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • USB Computer Cable for the mini

    I recently discovered that I have misplaced my USB computer cable for my Ipod mini. Before I purchase another one, I need to know that the one that is listed on the accessories site is compatible with my mini. When it listed what it was compatible with, it listed every one but the mini. Please let me know before I spend 20 dollars on a new one.
    Thanks!

    Mine is doing the exact same problem!
    Ever since I rented a movie from itunes with the ATV connected to the internet via wireless (strong signal) from an airport extreme connected to my modem from charter communications (with about 30Mbps speed) it will suddenly stop and by stop I mean it leaves the movie completely and says YOUR APPLE TV IS NOT CONNECTED TO THE INTERNET.
    So if I go to my network in the apple tv menu, sure enough my wireless network is missing. But the ipad is finding it, and the imac on wireless is finding it, and it is working. So we hit restart on the apple tv. When it comes back all is good. Then maybe the movie runs ten minutes and it does it again.
    In some cases the wireless network reappears but if I select it it still says I'm not connected to the internet.
    I have to restart everytime or it will not properly reconnect to the internet or find my wireless net work and actually work and connect.
    It has been connected in the same place for a year and never had an issue.
    Nothing has changed..... I have not added a wall to cause interference....
    My iPad and iPhone show FULL strength.
    Please help!

  • How to set raw format for canon powershot a1100 is ? ,,according to the specs online it can.

    how to set raw format  for canon powershot  a1100 is ? ,,according to the specs online it can.

    It requires the Canon Hacker's Developement Kit (CHDK). It runs off of your SD card and does not harm your camera. Download a program called Stick-
    http://zenoshrdlu.com/stick/stick.html
    Follow the directions and you will be able to shoot in RAW along with some other deatures not available on your camera previously.

  • Blue Screen On eMac From Generic USB cable for a digital camera?

    I recently got a digital camera from a friend and ordered a $2 usb cable to upload my pics. it uploaded them fine but the next time i started my computer i got a blue screen with only the mouse curser on it. i unplugged the cable and tried to start it again and it worked but then it froze again. now every time i start it ( with all the cables unplugged except for the mouse and key board ) it goes to the blue screen.

    If you boot in Safe Mode and open Applications/Utilities/Console, can you view the logs (e.g. system.log, CrashReporter logs, panic.log, etc.) looking for events tagged at the time of one of the blue screen starts? Look for indications that the eMac was trying to load some library or start some service, and never came back from that.
    How did you upload the pictures from the camera? Did you use a Mac program iPhoto or Graphic Converter or the like, manually drag the photos in the Finder, or did you use camera software? That you can boot in Safe Mode (which disables third-party drivers) but not normally raises the possibility that camera-specific software installed incompatible drivers onto your hard drive. Not that all camera manufacturer software is suspect by any means (Kodak EasyShare works OK on my eMac, for instance), put it's possible some third-party software written for Intel Macs would install itself on your PPC eMac.
    If you did use third-party camera software, you have some options. Check the camera manufacturer's website and see if there's a updated installer for the software, especially one for your OS version, and most especially if there are different PPC and Intel versions. If you find a more recent or more PPC-specific version, download that onto CD-R and install it on the eMac after booting in Safe mode.
    Another option: boot in Safe Mode, and look for anything you can be certain was installed by the camera software. Look for manufacturer/model name and/or install date. Look at the root level of your hard drive in the Library and System/Library folders, since the eMac is going to blue screen before you ever get to the login prompt (note: if your eMac is set up to automatically log you you, extend the search to your home directory Users/yourname/Library folder as well). Besides searching by name (command-F) on the hard drive, you can manually inspect folders to spot things that may not occur to you to plug into the search box. Some places to look:
    /Library/Application Support
    /Library/Extensions
    /Library/PreferencePanes
    /System/Library/Extensions
    /System/Library/Contextual Menu Items
    You can move suspect software to a holding folder (don't delete anything yet!) and then see if a normal start will work.

  • Firewire cable for camera

    hello, i would like to find a cable to go from my canon 60d camera to the firewire port. i have been to numerous places and they do not have it. i could not find it at canon as well. any help would be great.
    thanks

    I'm confussed... Why do you need a FIREWIRE CABLE for, does your computer not have a USB port?
    I think what you need is this...
    You can find this cable at any RADIO SHACK, WALMART, TARGET, BEST BUY, etc.
    Here's a diagram of different types of USB ports, which one does your Camera have?

  • Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with an app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on th

    Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
    Thankyou.

    Hello. I want to use my iphone as a viewing screen for a usb endoscope, (its a small camera on a long cable for inspecting down piping and such) with your app is it possible to attach the usb to my iphone using a adapter to watch the live video feed on the iphone?
    Thankyou.

  • I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

    I have a USB cable for my iPod touch 4th gen. I have tried almost everything to make my windows computer find my iPod touch but its not finding it. Any help on this issue?

    If not successful:
    Try DFU mode and then restore
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try another USB port and cable
    Try another computer to help determine if you have an iPod or computer problem

  • My Itouch 3rd gen can't be recognize by my computer but when I put my iphone4 its can be recognize I use the same cable for both of them.

    My Itouch 3rd gen can't be recognize by my computer but when I put my iphone4 its can be recognize I use the same cable for both of them.

    Does it charge?
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing  photos for a website I was adding to.  I now have a new computer which runs windows 7.  Is it worth installing it again on my new computer?

    I had photoshop elements 8 installed on my previous computer and it did not work properly when it came to sizing  photos for a website I was adding to.  I now have a new computer which runs windows 7.  Is it worth installing photoshop elements 8 again on my new computer or will it be a waste of time?

    I have PSEv.8 on my computer running WINDOWS 7. It works perfectly..
    Perhaps you need help with saving files for web use.. Will be pleased to assist you when you get everything set up.

  • I have a MacBook Pro running 10.7.2.  I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade.  iPhoto does not see the camera nor does Image Capture.  IC says there is not a camera connected.  Cable is known good.

    I have a MacBook Pro running 10.7.2.  I am trying to import photos from my older Canon EOS-1D for the first time since my OS upgrade.  iPhoto does not see the camera nor does Image Capture.  IC says there is not a camera connected.  Cable is known good.  Has something changed?  Thanks!

    If neither iPhoto not IC can seethe card it might suggest an issue with the card or the ports on the camera/mac.
    Try reformat the card, change the ports and/or use a USB Card Reader.

  • Failure to fix my cable for over a year and a half! HELP!

    Failure to fix my cable for over a year and a half! HELP!
    I regretfully have to inform you that I might have to discontinue using Comcast, for the following reasons if I cannot et you to resolve these issues. It should be noted that this is something that I do not want to have to do. However, basically I have no choice.
    1. Repeated and Constant Internet Issues and Poor TV Quality for over a year.
    2. A substandard quality of service, just even compared to my next door neighbors who has Comcast. The service has issues daily. Not a week has gone bye without an issue either small or large.
    3. Constant and repeated interrupt of service and an overall low quality of product. Time Outs, High Ping rates into the 100s and 200s, Cable Light Off, Poor Quality of TV picture, fuzzy, Digital Blocking even on non-digital channels with or without box, Occasional CB Radio chatter over interment connection <-(the odd one).
    4. The constant run around from the employee’s at Comcast and Service Department who either are unable to fix my problem, or unwilling to fix my problem, or have no one qualified to fix the problem. The amount of service calls and tech support personal I have had come to my house and had to call is so numerous I cannot even recall the amount.
    5. Paying full price for a substandard quality and product while others around me do not have too. Including my next door neighbor which does not seem to have an issue.
    The Story-
    I purchased this house over a year and a half ago. Note; I did think it was odd that the pervious owner of this house had Comcast TV, but a DSL internet connection (I know now why he had to do that). In a brief conversation with him recently when he was visiting our next door neighbors he told me of how he had the same issues and had to switch to DSL.
    I am, and always have been an avid Cable user and in particular for the Internet as the Broadband just makes it so much more enjoyable. I used Time Warner Cable for over 7-years prior to “having to” use Comcast with great service and good connection and a highly enjoyable time over the internet playing games and surfing the web. I have to use the words :“having too”, as you are the only Broad Band Internet connection in my area currently (I moved to the Burbs, not the Boonies) so I still don’t understand why my choices are limited. Must be nice to have a Monopoly though. : ), and I am starting to think this maybe part of my problems and why nothing is being done.
    In any case, my internet use is for entertainment only. Surfing the Web, playing video games, Online Classes, and whatnot. Nothing life treating, or a must have service and basically, fun for the family, not for frustration. I like to use Cable as I never have to worry about the line cutting out or losing connection. This used to be the case, but with Comcast I do have to worry about this, and it happens often. Simply put: it is NOT always ON as advertised, at least for me.
    The Issues-
    From day one, I have had nothing but repeated and constant issues with my internet service. I don’t even think I had Comcast a week before I had to make my fist service call. See I was used to another Cable service and silly me expected my cable to work. From there it was all downhill. I have had so many service calls its actually outlandish and would be funny if it was someone else. Its like a TV sitcom actually.
    Each and every service call goes the same way. Tech comes out, stands around, recognizes the problem and leaves. No fixes mind you, and the reasons are below.
    Recent History-
    With the internet on the fritz again and only seeming to get worse I decided to call and have someone come out and check it. A preemptive strike on my part in other words, before it totally blew out like it does and taking days for it to come back on. I have been dealing with this for over a year getting kind of frustrated with the whole process.
    I talk to the service department and they also see the issue (sporadic interrupt of service and poor quality). With so many problems and the list ever growing most likely on my report the service guy said he would send a Line Tech out to check my problem on Monday (the ninth).
    I think to myself finally some progress and it only took a year, a real Line Tech my issue is sure to be solved.
    Unfortunately, the apparent Line Tech does and did the same as every other tech sent to the house. Set around for 20 or so minutes futzing around with the computer. Notes the issue of single loss and poor TV quality makes some notes and says sign here. *take note of paragraph below about Line Tech.
    Around Thursday, I call up the service department basically asking if and when my service problems will be fixed. With little shock and surprise I was told that nothing is scheduled the last service call the Line Tech was not really a Line Tech and I should have been called back and or at least informed of that a Line Tech was not scheduled to be sent. This is normal by the way.
    The Phone Tech checked my service and found that an issue did exist and proceeded to tell my that he would advise his supervisor of the issue. He also stated that if someone had not called me by 6:00PM this coming Saturday, that I could call and he would expedite matters.
    Tick-Tock-Tick-Tock-Tick-Tock-Tick-Tock
    Saturday at 6:20PM I call up the service department, punch in my phone number and low and behold I’m sent immediately to the Clams Department instead of the Service Department LOL.
    After explaining the issue to the Clams Department (my thinking is at this point is; why pay for it if its not working and they wont fix it) I am transferred to the Service Department after a brief expiation of the issue. I guess I am a little late with my bill, but can you blame me?
    The Run Around-
    Talking to a new service persona again which is the same with ever tech sent to the house (Never the same one twice). Apparently nothing is on my report about this call I made earlier, or he does not note it.
    The new service tech while helpful and curious taking the brunt of my frustrations at this point goes through the same procedures that I have been through so many times now I know them by hart. I acknowledge the fact ahead of time to myself that my tone although frustrated is nothing personal, and the service tech should not take it personally. Its just that at this point I’m beyond frustrated. I try to be as understanding and curious as I can while he tries to help me.
    I explain the repeated problems and what is going on. In this instants the service tech mentions something about some service package (come kind of other signal maybe being sent to the modem).
    At the time my internet is somewhat working with only a few time outs and just above normal pings so I cant really blame him for not seeing an issue. I’m mainly calling just to find out why I didn’t receive a phone call, or get another appointment to have this checked into.
    My service was cutting out right before I called, which is why I called. The service tech just happened to check my service while it was working for 20 or so minutes. : P
    Although, I am sure the Tech knew what he was doing and seemed very knowledgeable and probably thought he had resolved an issue that has been plaguing me for over a year now I knew nothing had changed. (this has happened before by the way same exact procedure in fact, and must be part of the training).
    I’m trying to hold my volume down and not get too upset. Its not the techs fault and probably does not know I have gone through this procedure before. I want to try to explain this but he is busy trying to work his magic. I remain calm, but I even made the statement that I would probably be calling him back in 15-minutes. I try to end the conversation and phone call as politely as I can. Its not his fault, his just trying to do a job.
    Anthony
    Case Number: 053300005
    Well not even five minutes later you will never guess what………… Pings start dropping and the internet is cutting out on me.
    The Problem-
    The problem has been defined as a Line Issue, and an On and Off interrupt of service. At this point even the TV is being affected. From the first time I called (like over a year ago) the issue is defined to me as an On OFF issue.
    The Problem trying to get this fix-
    You apparently have no Line Techs.
    The Pole near my house is apparently a Forbidden Area that no one must go near. LOL
    You cannot get these people to go near it apparently. They only classify the problem and go away never to be seen nor heard from again.
    Now honestly I can understand with employee issues seeing this happening from time to time, but not for over a year and with service calls up in the tens and twenties…..
    Worst of All-
    I think the worst part of all of this is I have become so used to the poor and substandard quality of service. So used to it that I only call or complain when its totally out or is visually not working correctly and can be tested. I don’t call and complain because its not working as Advertised, because in fact it really never did or does.
    I also, don’t call a lot of the times because of dealing with the service department. If its working at that moment they cannot define the problems. Not really anyone’s fault as it looks like its working even if the pings are in the 200 range or currently no time outs are accruing. I mean at least its working, and they say Speed is not Guaranteed anyway.
    The Forgotten and Unanswered Questions-
    I don’t know about the rest of you but sometimes while talking to people I forget to ask questions or the question does not come to mind until the conversation is over with. In any case, the Phone Service Tech said that what he did should have been done along time ago.
    However, if my cable was somehow magically fixed by what he did I still have these questions;
    1.What happened to my Service Call and why did no one call my by 6:00PM today?
    -I waited around for the call actually, and I really would like to get this issue resolved.
    2. Why is my TV picture still bad?
    3. Although my internet seemed to be working today and only cut out once for a brief period of time why did the supposed fix of the Phone Tech double and even triple my pings, and still occasionally cuts out?
    This is usually when I can tell its going to start acting up as the interrupts become more frequent and growing in intensity and length. I always have them anyway I am used to it.
    However, on the other hand, I am already seeing time outs and interrupts and should I be paying full price for a lower quality of service compared just to my next door neighbor ?
    This is a very hard question for me to ask myself. I like using Cable rather than a Dialup Service, but there is also the whole principle to the matter as well.
    *Should I pay full price for a service that is substandard to everyone else’s?
    *Should I pay full price for the same connecting I used to get a discount for, because of the poor quality?
    *Should I call and complain everyday and turn this into a daily ritual? I cant keep taking time off from work to wait for someone who does nothing except stand around and futz with the computer for 20mintes and recognize the issue.
    *Should I have to complain so much and go through the process which is like pulling teeth to get you guys to do something about it?
    Maybe this is all my fault, and I am doing something wrong. What do I have to do to get this fixed? I don’t want to have to get DSL, so someone please help me. What am I doing wrong. I cannot keep taking time off from work to have someone come out only to recognize I have an issue and never fix it.
    To Whomever at Comcast:
    Is it so wrong of me to want, after a year of having repeated service calls with no resolution to the issue to ask, and request, that the cable service provided to me is the same as everyone else’s?
    If you handed noticed-
    Well if you haven’t noticed by now I am really tying to get this situation fixed and resolved. Mostly because, it is to the point where I am going to have to stop using Comcast and get DSL, or AOL or something because its more reliable. Which I really don’t want to do in the first place cable is supposed to be reliable and always on and faster.
    A little over a year not and I am running out of options though.
    Seriously Cant anyone help?
    Message was edited by: Anon1245678

    Part/3-
    Swami
    Wed/Jan/18
    An eventful day-
    Just a few minutes ago, got a phone call from the Comcast Cable GUY (2:20pm). He then Says he’s been working on trying to find the problem from 1 O’clock. Apparently, and maybe the case, (it was a brief conversation and he will get back to me later) but maybe some part has gone bad somewhere and he said he was waiting on a phone call from someone else.
    In any case, he said that they are trying to clear up the problem and that its been running better sense the Jan/14.….? Not here it hasn’t. LOL We also had a brief discussion about how due to my repeated use of the internet that maybe I notices this more than other people do. My next door neighbor does not seem to have any issues last time I talk to them. But the guy said someone who lives on Broadway (few streets over) has been having issues too so maybe its this part.
    I said; So I should see some improvement today… silence…and a brief pause….. After I find out what the problem is Ill come over and discuss it with you so you know exactly what is going on.
    I do have a feeling I am going to be told this is going to take weeks to fix or at least awhile. Apparently a Part is needed maybe. Ill have to wait until the guy shows and gives me a full explanation though.
    I called my wife and told her of the event and she is pretty emphatic about returning the TV cable box as the TV picture is better without it and she only really looks at the local or 3-like 70 anyway. She was like “Bad Part?” well its been bad for over a year then! We should get a refund for the whole year then… Sorry Comcast she is on a Refund Kick… I just want it to work.
    Part/4-
    The Tech Supervisor Mark, showed up at my door and tried to explain the issues. I felt kind of bad cause I probably know he got Chewed on along with some other people probably. At least they sent someone older and who looked like he had more experience and knew what he was talking about and could actually find the issue.
    I tried to be as apologetic as I could, and tried to explain that its just because this has been such a persistent issue over the past year and a half, and I have had way too many service calls for this not to be fix by now. I even went so far as to explain; it’s a new year and we are trying to get this problem finally fixed. I was also quick to mention how nice it was outside and that at least it was a good day to run around outside. I would have felt really bad if it was raining or snowing out, but it was a nice day probably upper 60s and sunny.
    We briefly discussed the issues and he said he and some others (I guess) had been working t the Head End fixing some issues… Which actually might have fixed my TV picture, seems better right now currently though. Currently NO digital Blocking on any channels currently, but as I said, it’s a sporadic issue popping up one day and going away the next or the problem lasting weeks and months then nothing for a few days and weeks.
    Mark, tried to explain that maybe the problem that I might been having (apparently along with a few others) was that a Temporary Line was connected on the MAIN. Basically 1” Main Line Cable run it to cable like that’s in your house (cant remember but off hand I think its 5, 10 or 15 gauge cable) and back to 1” Main Line Cable. It was all a little technical, I just nodded and said yes, and at least you might have found the issue right?
    He didn’t know how long that had been like that, and I said; probably for over three years as the previous owner had issues too, or at least sense I had bought this house about a year and a half.
    I went so far as to showed him some print screens of some of the issues I have been having, and I know he noticed all the yellow recites in my computer room. : P Unfortunately, I deleted all my old Print Screen saves when the guy last Monday (ninth) showed up and said he would fix the line, or at least track it down. I only had one from the previous night to show him or something.
    In any case, while discussing this Mark, said the guy that came out the other Monday never filled out a work order or something like that. I basically tried to explain that is the kind of thing I have been dealing with for little over a year. Tech after Tech after Tech; as I looked at all the yellow recites on top of my computer desk.
    Mark also, basically said, I should have pretty fast cable considering I only have two nodes and then basically it runs back to Comcast, or something like that. However, that Temporary Line is probably causing the issues. No definite date on a fix, but maybe 24-hours or a few days, but the matter had been expedited or something like that. *Cross fingers*
    That’s the real issue with this cable, its sporadic, and comes and goes. I’m pretty sure they are going to try to replace that line, but you know what….. I have heard that before actually. I have actually heard that for over a year now. Even the expedited part. : P
    Mark tried to thank me for pointing out this issue, and made some comment about how its actually helping them….but………. I can kind of tell he had been getting yelled at or something by someone. It was not obvious, but I could tell.
    I felt kind of bad about that, but… That happens when you work for someone, and the people who work for you (below you) don’t do what they are supposed too.
    I kind of tried to briefly explain to Mark about the issue again and that usually by the time a Supervisor gets out the issue has cleared up for a time….. Odd how that works by the way. But basically I got the old…well it looks like its working ok now and you should have seen some improvements over the last few days… thingy..
    We started talking about that Temporary Line being connected again and I walked Mark to the door and we said our goodbyes and I apologized again for being such a pain in the about this whole matter.
    Part/5-
    I called the wife and told here about everything. The first thing she asked is; is it fixed? She is still not happy especially when I tired to explain what the issue was and probably was and that at least maybe they found it.
    I have no idea of what kind of onward action maybe on my part in the end if things don’t get better. Its like trying to argue with the old Bell Telephone Company when that was the only phone company in the US and no other phone companies existed.
    I hope to one day, be a satisfied Comcast Customer, but to date I have yet to feel that way, at least with the Internet in any case and that’s only because I really don’t watch TV.
    I am also, hoping when, and if, some LINE is replaced somewhere that I see some drastic improvement along with apparently a lot of other people in my community and a lot less issues also. I still don’t believe that I should be just setting for; Ok well at least its ON now, or the light has finally stopped flashing.
    All a SNAFU?
    That’s highly questionable at this point, and I have to be honest with you. This is going on a year and a half of dealing with this. This SNAFU, could be the case, but it seems more like policy, or a standing Comcast Company Directive actually if you want my honest opinion. I don’t know what the Maintenance Budget is for my area, but you might want to consider doubling it, or tripling it.
    I really don’t care actually when this is fixed, as long as the issue is fixed. I cannot make a final judgment until it is finally fixed and go on and try to take further action onward from that point.
    Thus far I have only been given an explanation. I don’t know if anyone at Comcast realize exactly how many times I have had an explanation given too me though (either on the phone with a service tech or from an actual person “tech” at my house). The list is extensive of the actual explanations I have had over the past year and a half, but my favorite one is; squirrels.
    Part/6-
    We are still waiting on phone calls from people who said they would call us back today and check what’s going on. Both of us, (me and the wife) are slowly losing momentum again as this whole issue gets dragged out for weeks and weeks at a time.
    She is tired and I’m tired too, and Comcast is warring us down again it looks like. My wife was like; “do I have to call them, I really didn’t have a good day anyway and I’m tired. They were supposed to call us anyway, lets wait.”
    I tried to make a phone call (half heartedly, I myself as I’m tired too) as Carla (at my local Comcast office) wanted to know how the service call went, but after repeated attempts and being shuffled off to Billing, and then being put on hold : P ……and its actually getting close to dinner time. Maybe after dinner if I don’t just fall asleep first.
    So, in the end its still hang on for a few more days, and or, wait to have the problem fixed. Your guess is as good as mine, people. More Smoke and Mirrors or an actual Fix. Your guess is as good as mine.
    As for me, I’m going to bed, I’m worn out. Maybe a new line to replace that temporary one, maybe just saying I might get a new line to replace that temporary one.
    The Saga continues. Maybe it will end someday.

  • Replacement IDE cables for X-Fi Plati

    Hello,
    This sounds a little silly but while building a new computer I was removing the IDE cable from the I/O box from the PCI card and accidentally torn the ribbon off from the end connectors. Now I'm not sure if this is due to a faulty manufacturing on the ribbon (this never happens to me with regular IDE cables for hard dri'ves) or what, but I can't seem to find a replacement IDE cables anywhere.
    I've tried my local best buy, fry's, PC Club, compusa, but none of them have the IDE cables that would fit with the one that came with the Creative X-Fi Platinum.
    Does anyone know any online or retail stores that might sell these IDE ribbon cables? Are there any rounded cable versions of these? (for better airflow)
    Any help would be much appreciated.
    Thanks

    That is not a IDE cable, it's specialized for the X-fi. You'll need to contact Customer Support for a replacement.
    Dale

  • Camera software not opening to transfer images from camera to computer. What to do?

    My PowerShot 720is software ZoomBrowser EX not opening on computer. No images load and I don't have option to click on "connect to camera" so I can transfer images from camera to computer. Message says "Zb Module has stopped working. Windows is looking for a solution to this problem." Anyone have this happen and know what to do?
    Thank you!

    Hi BLG,
    If you haven't already done so, please update your software for Windows 7.  Here's how.
    Just click here to access the software updates for your camera.  Once there, just enter your operating system, then the version of the operating system.  Now click on "Software" to show the software updates.
    Click on "ZoomBrowser EX 6.9.0a Updater".  Installation instructions are on the next page.  Also, please download "CameraWindow "DC 8.8 for Windows" to your desktop.
    After accepting the required disclaimer, please download the program update to your desktop.
    After downloading all the software you choose to install, please install ZoomBrowser last. This will allow it to link to the other Canon software on your computer.
    Since you've installed an older version of software, you may now double-click on the program update to install it.  If not, just put the CD-ROM in your computer's optical drive and stop any installation program that starts.
    If you've already updated the software for Windows 7, please contact us for assistance.  Click here for contact options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Cable for TV

    Can anyone tell me what I need for my MBP to connect it to a TV? I have the port adapter which is a very short cable and I need the cable to go up to the tv but don't know the best thing to get. I'd like to get something that works on most TV's.
    Thanks,
    glenn

    The most flexible option is the DVI to Video Adapter combined with a mini-jack-to-RCA converter.
    The video adapter outputs either S-Video or component video, which should work with any and all televisions on the market today. If you have an HDTV, you might prefer a DVI-to-HDMI cable for clearer picture, but the mini-jack-to-RCA's still your best bet for audio (unless there's something out there I don't know about). Some HDTVs also have VGA inputs, which would mean using the DVI-to-VGA converter that came with the computer and a VGA cable, but that option seems rather silly, in all honesty. I've done both the Video Adapter and DVI-to-HDMI options, and I've been perfectly happy with both.
    It just depends on what kind of inputs your TV has. For 'most TVs,' the Video Adapter's your best bet. You'll still need to buy either a component video cable or an S-Video cable, but they're pretty cheap nowadays.

  • Video cable for n97mini

    Is there compatible video / av cable for n97mini? I mean for watching photos and videos on tv?
    I have a ca-75u cable that came with n95, but the quality isn't very good as if it wouldn't be compatible.
    Some Sony televisions can use my phone as a computer connected via usb, but it is very clumsy choosing every picture one by one... 

    Hello @svatanasov ,
    To get your issue more exposure I would suggest posting it in the commercial forums since the Compaq nc6400 and nc6000 are commercial products. You can do this here Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
    I did take the time to pull up the service guides for each notebook to compare parts.
    The nc6400 uses display cable 418898-001 (for the WXGA+ display) or 418897-001 (for the WXGA display).
    The nc6000 uses a different display which is the XGA (344396-001) or SXGA+ (344397-001) which don't appear to have a replaceable display cable. I managed to find some with a simple search on Amazon and Google but considering the displays are different I would assume these are not cross-compatible which would mean you cannot use one cable in another.
    To be sure, I would post in the commercial forums as it is monitored by community members that are more familiar with the commercial products.
    I hope this helps!
    Thank you for posting on the HP Forums.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

Maybe you are looking for

  • Access windows server 2003 from a local user machine (windows 7 pro)?

    Is there a way to look up user accounts from a local machine running windows 7 pro without having to always go to the physical server itself? The reason is the location of the server, a bit of an inconvenience. It's a windows server 2003 btw. Thank y

  • Keys act as if they are stuck

    I know keyboard problems have been a common issue with some of the original MacBook Pros, although I have never had any trouble until this afternoon. There was some debris on my keyboard and I wiped it off, foolishly without turning it off first. Whe

  • Smartform for output type CHKL (count list ) as Inbound Delivery(E1)

    At this moment, I know the Sapscript form RT_CHECK_LIST & program RTCHECKL for count list (output type CHKL) as inbound delivery (E1), but I need  the PROGRAM and SMARTFORM for this output?! Thanks in advanced

  • About kaffe jvm installation error

    hi, while installing kaffe jvm on linux platform :'./configure ' gives following error : extern size_t iconv (iconv_t cd, char * inbuf, size_t inbytesleft, char * outbuf, size_t outbytesleft); checking for X... no configure: error: GTK+ peers request

  • Pushing Contact list to IP Phones

    Hi every one, i need to know that is there any way to push down a contact list to cisco ip phones via call manager or something else so users dont need to create contact list on their phone manually and alos   is there a feature like auto entering so