Camera tracker solving without errors but not showing result points
hi
I am trying the new camera tracker in AE cs6,
im using very simple shots that can be tracked easily,
and im having some strange behaviours,
basically in many shots the analysis takes places with no errors but after the camera solve no result points appear, even if i use the advanced mode , changing all other parameters etc, and no errors are reported anywhere, also i select the effect on the panel and i also make sure the points size parameters are scaled up,
but if i click on processing points (the unchecked box below 3d solve) i can see they are all there, and i can also create camera and the camera is created, so its as if all the process takes place correctly but for some reason the solve points are not shown on screen
it has happened to me that with same shot sometimes they appeared and sometimes not, but most times they dont
what can be happening in here?
thanks so much
will try to explain better my problem
if i click on
Render Track Points
i can see there are great track points that follow all the movement perfectly,
and yet without checking that box no solve points appear, even when i select the effect on effects panel
or change any other parameter or do the advanced mode
i can still click on create camera etc, but i cannot attach a text etc to a specific solve point because no solve points appear
and yet as i say, if i click on the Render Track Points box i can see great tracking points all over the place following the action
so the fact that selecting Render Track Points on effects panel shows great perfect points following all , does that confirm that camera solve was successful?
i just cannot understand why i cannot see any solve points that i can interact with
i have tried to scale sizes all the way up, select effect on panel and hundred other things
thank you for any help
Similar Messages
-
Not showing results in simulation
hiii,
i made some chngs in (generate work schedule manually) in development server and transported to production server.
it is transported as i can view the changes but not showing result in simulation run, wats the reason...
ThanksNational Holiday is a simple Off and Paid Day.
So, hw u want the system to consider tht holdiay in payroll ?
might be u have to check in Time Evaluation for considering National Holdiay and wrkin any any spl. .payments towards it.
theere may not be any change of effect due to Holiday in Payroll until and unless the Absence Records if existing on dates of Holiday... then u mite have to delete the Absence Records and Update it again.
Or there is a report that need to be generated to remove the inconsistency... which currently dont have idea... will check n let u knw... in the mean while u can follow deleting the record and update Absence on Holiday again.
Regards
...Sadhu -
flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11
I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC -
Device Show in My Computer But Not Show in itunes
My iPod Shuffle Disconnect During The Restore Process And Now Device Show in My Computer But Not Show in itunes.Please Help Me.to Solve This problem>
Does it say that it works with iOS devices (iPhone, iPod touch or iPhone)? iOS devices have a different format/file system than other iPods.
-
In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?
HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated. -
my iPod says to connect to iTunes, and then it crashes, error 3014, I've tried everything it says that might solve the error but nothing
Not knowing what everything is:
Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Data is in the repository, but not showing on the EPM workspace
Hi All,
Recently we have migrated from Hyperion8.5 to Hyperion11.1.1. Migration went on well no errors, after migration I see some folders missing and when I queried on the repositories all the folder data and reports are there in the repository but not showing up in the EPM workspace. It is weird. Did any one encountered this type of error. Is there any work around to this.
Any help will be greatly appreciated
ThanksCheck BI+ security in shared services. Set someone to BI+ Administrator and have them look in Workspace for the reports. In Workspace, check the Permissions of each folder.
-
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive. -
Cash Management - AutoRecon without errors, but still unreconciled?
Hi guys,
Pretty interesting question:
I have multy period's bank file (transactions for 3 accounting periods), all settings are according the manual on AP and CM sides done.
Statement's Import finished without errors, AutoReconciliation finished without errors, but Statement still have status UNRECONCILED and on AP side transactionsin ap_checks_all table still have STATUS_LOOKUP_CODE as NEGOTIABLE, and CLEARED_AMOUNT, CLEARED_DATE, REQUEST_ID, CLEARED_ERROR_AMOUNT and ACTUAL_VALUE_DATE fields are still empty.
The periods were OPEN at the time of a run.
Only when I go to the Statement in CM and open the lines and reconcile them one by one it works.
Please advise, any help will be appreciated!
BokHi,
Step: 1
Check the System parameters Auto Reconciliation Setups
Step: 2
Check the Bank Statment line has Bank Transaction Code attached
Step: 3
Check the Document number given in Bank Statement line is matching exactly with the Payment/Receipt
Step: 4
Check the Bank Code attached to line is same as the available line you are trying to match i.e. RCT to Receipt, PMT to Payment etc
Step: 5
Assign MO: Security Profile Option to your user id
Run Autoreconciliation Program now. The issue should be resolved.
Regards,
Sridhar -
Errors are not showing in Tasks view
Hello,
I dont know why errors are not showing in Tasks view after I click Save All Metada, they only show when a Rebuild de project. This start to happen after a few days, can anyone tell me how to fix this?
ThanksHi Carol,
After rebuild all compile time dependency and syntax might be checked and something is missing then errors suppose to come.
If you have doubt you can re install the NWDS...
Deepak!!! -
Photo Uploaded in AD but not showing/visible in Lync 2010 client
Photo Uploaded in AD but not showing/visible in Lync 2010 client
balaHi,
Please also double check the size of the photograph in AD, make sure the size not overtake 48 pixels by 48 pixels, as it has a serious limitation on the size and resolution of the photos: the thumbnailPhoto attribute can only hold a photograph with
a maximum size of 48 pixels by 48 pixels.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Playing movie on tv; playing but not showing up; what output, DVD?
1st time trying to play movie on tv; playing but not showing up; do I need to change output? Only DVD & DVR shown. Thx
You need to provide more information. How are you connecting your iPad to the TV. Are you using an Apple TV 2, a component AV cable, a composite AV cable or the digital AV cable?
-
A message cannot be seen on my incoming emails. I can only view the message if I click on reply. Also any links attached to email will not open. I have tried everything to solve the problem but not able to.
Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
how to remove 1797 emails. stuck in inbox. but not showing anymore - and i have the same problem wit the sent. please help
This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card. -
My iPhone 4, bluetooth turn on in settings but not showing on home screen
My iphone 4,bluetooth turned on in settings but not showing on home screen
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
Maybe you are looking for
-
TS4006 can you set up an icloud account on a phone remotely
My daughter has lost her phone and I just found out that she never set up an icloud account. So I cannot use the "find my iphone" app. Is there anyway to set-up the icloud account for her phone with out having her phone?
-
I have a tiled background image but sometimes the white box only covers half the content and my tiled image is displayed under the other half of the content... Do I have to manually make the box for each page or is there a way to attach it to both
-
Switching off the workflows...
During actual production cutover, we need a means of switching off team center and other workflow updates that send information out of SAP during conversion runs and switch them back on again after conversion. We need something that we can use (like
-
Oracle ODBC 10.2.0.2 - can't get it to work
I have Oracle 10.2.0.1 software installed on my computer. I am trying to update my ODBC driver to 10.2.0.2. I used the OUI that came packaged with my 10.2.0.1 installation to install the 10.2.0.2 driver. When I go in and try to add an ODBC data sourc
-
How to get the sum of selected check boxes?
I have created this simple form with several fields. Fields can be selected via a check-box and they have a price listed. I would like to have the sum of each selected product, added in total. You can check it out here: https://www.dropbox.com/s/wl1b