Camera unconnected after updating os 10.10.3 on macbook air A1370

after updating to OS 10.10.3. Why my camera doesn't work? it was written " not connected ". can you tell me how to solve this? thx

Have a look at this post:
https://discussions.apple.com/thread/6238559?tstart=0
Geoff.

Similar Messages

  • After updating to Yosemite 10.10.2, macbook air Wifi does not work. What to do?

    I upgraded from Maverick  to Yosemite in Nov 2014 & my mack book air 2011 model became slow. Yesterday after downloading & updating 10.10.2,  Wifi does not work, it prompted Gatway Time out. Anybody can help please? Dr. Mostafa

    Moreover I am to add, in the same network, windows PC Wifi works & more interestingly Macbook with Maverick also connects with the same Wifi, I mean to say this is the problem with Yosemite 10.10.2. Before updating on Sunday last, my Wifi was working nicely.

  • How do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3

    how do i retrieve lost pictures, ie camera roll- after updating my ipad to IOS8.3

    Hi dreamafrombartow,
    I hope you are able to get your pictures back. Do you have a backup anywhere else?
    I did find a couple articles that may help with your recovery.
    If you need help restoring an iCloud backup
    http://support.apple.com/kb/TS4036
    iCloud: Troubleshooting missing information after restoring an iOS device
    http://support.apple.com/kb/TS4605
    Best regards,
    Nubz

  • Anyone not get the camera shortcut after updating to ios 5?

    anyone not get the camera shortcut after updating to ios 5?

    Tried double pressing the home button when on lock screen?

  • Iphone 4s camera blurry after update ios 7

    iphone 4s camera blurry after update ios 7

    Hello wan nur izyan
    Check out the Camera section in the iPhone Hardware Troubleshooting article below. You may need to restore your iPhone to resolve it.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Regards,
    -Norm G.

  • No camera detected on OSX 10.8.5 running on MacBook Air 2013

    No camera detected after update to OSX 10.8.5  on MacBook Air 2013

    After the original (flawed) update to OS X 10.8.5 was installed, the internal camera of a 2013 MacBook Air would not work in Skype and some other third-party applications. The flaw was fixed in a supplemental update. However, if you followed some questionable advice that was circulating on this site to hack your system before installing the supplemental update, then it will not restore camera functionality; in fact, the camera won't work at all. The solution in that case, most likely, is to install the 10.8.5 Combo update.
    In the future, I suggest you ignore advice to replace, remove, or change built-in system components.

  • My built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

    Hi, my built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX:  
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • After I sync my iPad to my macbook air, I can't open my apps on my computer. The apps are there in itunes but when I click on them nothing happens. Why??

    After I sync my ipad with my macbook air, the apps show up in my itunes on my computer,  but when I click on them nothing happens.

    Kristyn,
    Those Apps listed in the iTunes Apps library will only work with iOS devices. They are not designed to work on your Macbook Air system.

  • After hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    after hibernation, when trying to login to MacBook Air, it does not accept my password. I have to shut off and then get prompted with the following: Mac OS X wants to use the "login" keychain. I put in the password there and it works. any suggestions?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • IPhone 6 display got zoomed while using the camera (happened after update to iOS 8.1.3)

    Hi, after updating to the newest iOS version (iOS 8.3) I have experienced a lot of graphics issues. I experiensed it in the keyboard with some of the "button pop-ups" lingers. Also, when I rotate the phone it kinda shows a negative version of the screen besides the normal one during the rotation animation.
    However this is not the big problem.
    Cause, while I was about to take a picture, using the standard camera app, I zoomed in stretching two fingers away from each others. Suddenly the whole screen zoomed in, not only the camera. So after that I can only see a limited part of the screen. I have tried to turn the phone off and on and it seems promising during the startup (I can then see the apple logo in normal size), but as soon as it comes to the locked screen it zooms in again.
    Because of this IO am now unable to use the cellphone and I consider to downgrade to 1.2.
    I appreciate all suggestions.

    To disable Zoom double-tap the screen with three fingers.
    Go to Settings > General > Accessibility > Zoom and turn this OFF.

  • Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

    My device is Iphone 5 64gb IOS 8.
    I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
    1. How can i fix it?
    2. Or how to rollback to IOS 7+ ?
    3. Should i come to app store with this problem?

    I'm having this same problem too.  Worked fine prior to iOS update.  I contacted Verizon this morning who advised that this is a known issue.  They suggested I backup my device, and perform a factory data reset.  When prompted to update to iOS 8 again, re-installation has been known to resolve the issue.  With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

  • Help Needed , N93I Camera problem after Update

    Hi All
    After updating my N93I the camera can't take pics and only take Black photos , You don't see nothing on the screen ( Only stripes)
    The Phone is O.k since it worked for 1 time even after the upgrade and that's all.
    I can use the internal camera.
    Please Help .

    same problem here ( still waiting maybe someone knows the solution (

  • Camera Problems after Update - NOKIA SUPPORT PLEAS...

    Hi There
    I am reading over the net that some users lost the ability to use the camera after Update of firmware.
    I am one of those that have a N93I (Which supposed to have a great camera) that can't use the camera any more , When I try to use the camera I get stripes on the screen and the pictures are all black.
    I am reading about the same issues with other users and other phones.
    I have tried to update the software several times and it remains the same.
    What are my options , I got the phone as a gift from other state and I don't have a place that can help me here in Israel , I guess I need to re flash the phone but no support center in Israel that can do this since this phone is not “official” supported in Israel ... What can I do.
    I must say that I am disappointed from Nokia phones; I have bought two in the last months:
    Nokia N93I : I cannot use the camera after using the NOKIA software update.
    Nokia N95 that the screen turn to black, the phone is working but nothing on the screen ,At least this can be fixed by Nokia partner in Israel since the phone is also being sell in Israel.
    I am a big fan of Nokia, I used a many phones and the main issue is that those are the best phones and I feel like **bleep** with those.
    Please help me and advise me what I can do with my N93I.
    Thanks in advance.

    I AM VERRY SORRY TO BE THE ONE WHO TELLS U THIS but, unfortunatley the black photos and strips are not caused by the update (( it is a HARDWARE problen nothing to do with software. i had the same problem and i went to a service with it, they reinstalled the soft but still didnt work, then when they checked the camera inside the prob was truly this thing: camera itself
    srry man anyway try to get an opinion of ur self from some services i may be wrong
    (that war the problem in my case with black/blue photos and stripes)

  • Camera problems after updating 8100 Firmware to v4.5

    Hi All
    This is a known issue to me as I update all our work handsets with Blackberry firmware for the company I work for.
    After updating the firmware on several handsets to the latest 4.5 version of the Blackberry 8100 there is a problem with the camera.
    When you are in view mode and outside (even whilst overcast) the screen goes white as if the aperture for the lens is open wide.
    Even when you take the picture the result is whiteness everywhere.
    Please see examples here:
    http://www.imagedump.com/index.cgi?pick=get&tp=540100
    and
    http://www.imagedump.com/index.cgi?pick=get&tp=540101
    Both of these pictures were taken indoors with just flourescent lights on.
    However if I return the firmware to a lower level the problem no longer exists.
    I have tried changing the white Balance settings on the handset and no matter which setting I put it on the same results occure.
    I was wondering if there is a patch or do I have to wait for the next version for a bug fix?
    Thanks for your help in advance.
    Gadget
    Solved!
    Go to Solution.

    Upgraded the handset software to 4.5.0.55 and the camera problem no longer exists.
    Can I get Kudos for solving the problem myself?? LOL
    Gadget

  • Camera problems after update to 8.1

    After updating to IOS 8.1 on my iPhone 5, my camera died. I tried to recreate the phone, but I am sure that the problem is the Software update, and as long as I can't go back to an early version I can't fix it. What do i do? I had no problems with the 8.01 like everybody else.
    The camera is like frozen... sometimes i can switch and get the front camera ( the one that is on the same side as the screen ) to work but the main camera is dead.

    Hello there MikeeSimonsen,
    It sounds like your camera is not working at all on one side, and very inconsistently on the other side. Start with these steps in the following article:
    Get help with the camera on your iPhone, iPad, or iPod touch
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    If the issue persists, before you reach out to Apple per step 4, I would next backup your phone and restore it as a new device, rather than restoring it from a backup with this article:
    iOS: How to back up your data and set up your device as a new device
    Restoring an iPhone as a new device with iTunes will determine if the issue is to do with software or not. If the issue does not persist when it is restored as new, then restore your backup and verify it still works, or isolate the issue to the backup itself. 
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

Maybe you are looking for

  • Call java from ABAP

    JCo connectivity is used to call RFCs from Java. can i call Java from abap? thanks in advance..... regards, Sundararamaprasad

  • List in prepared statement

    Hi there! How can I make this Prepared Statement: "select * from table where id_table in ?" the possible values for the ? should be something like this: (1, 2, 4, 7). Which method should I use to set the ????? Thanks in advance

  • IdeaCentre A310 - Supported CPU Upgrades

    I have an A310 with an i5 450M CPU. I'd like to upgrade it, what is the fastest processor that will work?   I'm thinking the 560/580M, but would one of the quad i7's work at all? Anybody successfully upgraded their CPU? Beachball

  • I can not down load camera raw into cs3.

    can not download my camera raw files into cs3

  • Manufacturer name not appearing RFQ Print

    Hi, How can we put the Manufacturer name in an RFQ so that can be seen in the printout of RFQ Regards, Aritra