Camera under Windows 10

Hi,
I'm interested in knowing how camera works under Windows 10.
My understanding store app will lost camera when user switch to other app under Windows 8. I did a quick test under Windows 10 desktop mode, it seems to work the same way. My question is, for app like video communication, that means users
can't have video call and working on something else at the same time with store app. Or am I missing something?

For the video call scenario take a look at the Real-time communication sample. This allows a video call alongside another app on Windows 8.1 as
well.

Similar Messages

Why does my iPhone 4S no longer appear as a camera under windows XP

I have an iPhone 4S for about 6 months. I have taken many pictures and previously when I connected it to my PC runnng Windows XP pro, the iTunes application started and the "camera wizard" also started. With the camera wizard I could download any or all of my photos from the "camera roll". Today this no longer works. Is this because of the operating system upgrade in the iPhone (6.0.1 (10A523), or a setting in my PC which has changed? The iPhone also appeared as a reomvable disk (which contains only the photos in the "camera roll") This no longer shows, so it seems it is an iPhone problem, not a Windows problem. Any Suggestions?

I assume you've already seen this, but this is Apple's troubleshooting page on your issue: http://support.apple.com/kb/TS1538. In particular, if you haven't already done so, you might want to look through items 4-6 at the bottom of this (checking the Apple USB driver in device manager, 3rd party mobile phone and security software.

X230T camera does not work under windows 8

Hi!
Is your camera working under Windows 8?
Mine is not. It used to work some time ago, but even then the driver was instable. Now, since a few weeks, it seems not to work at all anymore. Reinstalling the driver does not help.
This may ba a hardware or a software issue, that's why it is important for me to know if yours is working.
Thanks!

As I wrote, I have tried to reinstall the driver without success.
It should be a hardware problem if you are able to run the camera perfectly. Are you using a 64- or 32-bit OS?
Thanks!

Can I access my iSight camera under Parallels (Windows XP)

As above. Thanks a lot.

Yes, i know the new bootcamp supports iSight under Windows XP.
just wondering if its better in bootcamp. :P
thanks anyway.

X230T graphics performance under Windows 8

My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
X320T running Windows 8 Pro x64

rsbrux wrote:
My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
After you changed the setting to "Maximum Performance" , did you run the WEI test again?

IPod Touch Recognized as a Digital Camera in Windows 7 (x64) - SOLUTION!

Hi guys
After several days I finally found the solution to this with some help from Apple 2nd level support.
Symptom: iPod Touch is not connecting to iTunes. Under My Computer you find the iPod as a Portable Device > Digital Camera
Cause: Windows 7 wasn't able to install the right Driver for your Touch.
Solution:
1. Uninstall all the Apple software via Control Panel:
- iTunes
- Quicktime
- Apple Software Update
- Apple Mobile Device Support
- Bonjour
- Apple Application Support
2. Delete all the directories related to Apple (Including Apple,iPod, iTunes, Quicktime and Apple Computer -if they are there-) under:
- C:\Program File\Apple
- c:\Program Files (x86)
- C:\users\<USER>\AppData\Local
- C:\users\<USER>\AppData\Roaming
3. Restart
4. Reinstall iTunes (Right click and run as Administrator) but THIS IS THE TRICK!! change the installation path to C:\program files\iTunes (Remove x86) !
5. Connect ipod
It will still be a Camera..don't worry..
6. Go to My Computer > right click > Manage > Device Managers > Find your ipod under the Portable Devices
7. Right Click > Update driver > Specific location and browse C:\Program Files\Common Files\Apple\Mobile Device support\Drivers
8. After succesfully installed this driver you will be able to see your iPod Touch in iTunes
Enjoy !
J

take a look @ these threads: one and [two|http://discussions.apple.com/thread.jspa?messageID=11045615#11045615].
JGG

Premiere Elements 8 under Windows 7: HOW TO DO?

My system is a MICROSTAR (MEDION) Quadcore 6600(think it's made by MSI) with 4GB memory, 2 x 1TB HD Wetern Digital GREEN (replacing the very poor quality Seagates 2 x 500Gig originaly installed) and running Windows 7 64 and 32 Ultimate. The 32 version was installed especially for PE8
Why I didn't stay with PE7?
Strange enough, PE7 worked perfectly under Windows 7 64bit RC and RTM, but with the Official release of Windows 7 32 or 64 Ultimate, it was finished with the Happy Hour, Crash, crash, crash all the time!
So I downloaded from Adobe a official PE8 and started very happily with it.
But it was CRASH & GO all the way !!!
I have send a few messages to Adobe Contact, which deviated me to this forum so I could spit my poison far from their "Ivory Tower" No answers or help from them. PE8 is paid, so go to ...
I found out immediately that I was one of the many people to regret this "Buy of the Year", but since PE7 didn't work and Windows 7 is so good that I don't want to go back to XP or Vista, I had to find a way to make this SH.. work. Luckily the Forum proposed me a few solutions for which I am very grateful.
After a few editing's with DV (about 3hours long), I am having a little bit more experience with this PE8-pre-beta-thing.
First of all I disabled the GPU-thing in the preferences, then I disabled the "Background rendering".
The Medion computer has a "diet" Nvidia Geforce 8600 so there are no 3D drivers to disable, neither has Windows 7 this Windows Defender, so that could also not be the problem.
Anyhow, these few minor changes seem to have solved a lot of crash problems.
Also, NEVER open a PE7 project in PE8 !!!!! It's really not 100% compatible: no way to render previews and crashes guarantied!
Be very careful in applying transitions and video effects, especially if you start cumulating them. Maybe they will work in preview, but you never know if you will be able to render a film or DVD from it.
For example "camera view" + "Soft edge" ( since I have a Dutch version, I don't know if these are the right names) to make a kind of 3D frame around your image. No problem in PE7, but PE8 doesn't digest it! The only way to render this to a film is to import the project in to PrProCS4 and change the other transitions which are not supported by PrPro with similar ones. Or going from New York to Chicago over Mexico City!!
If you take care of these precautions you can work very satisfactory with PE8, without crashing more then was the case with PE7 (low memory problems)
This PE8 should have been written for 64 bit, so it would have suffered much less memory problems, then now.
Some things I like better with PE8, like the ClipArt's, the Menu's and the new Smartmovie themes, which I create and then edit manually.
Automatic backup creates now 5 instead of one file.
What I don't like:
If you capture in scenes, it's still scene 11 coming after scene 109 etc, instead of counting from 001.
With PE7, you could see in which map the project you wanted to open was situated, here not.
Place of the Project changed, without reason, change for the fun of change?
Making "markers" has become more complicated, without improving. Also changed just for the fun of it?
Can still not capture HDV by scenes, for that I have to use Sony Vegas.
Until now I didn't try to edit HDV in PE8, because I don't trust PE8.
What we really need is for Adobe to bring a major update to fix al these annoying misfits and to make a customer's dialog instead of a one way street policy.
If I find new ways to make work easier and without crashing I will not hesitate to let you know.
Until then, hope this can help you a little bit!
Roald

NO, YOU CANNOT !!!!
If your project was started in PE7 and you import that project to PE8, you cannot, I REPEAT, you CANNOT render this files to a preview.
You wil get the render window, but no counter or anything else will move or happen.
Nothing, rien , nada, niets, nichts!!!!!!
At least not here on neither of the 3 installations which I did under 3 different Windows 7 !!!!

Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.

Team,
Photoshop 2014 keeps crashing under Windows 8.1 on a Surface Pro.
I have tired.
1. Updating Intel Graphics Card. (unsuccessful)
2. Logging in and out of creative cloud. (unsuccessful)
See log below.
Faulting application name: Photoshop.exe, version: 15.2.0.236, time stamp: 0x542531ba
Faulting module name: ntdll.dll, version: 6.3.9600.17278, time stamp: 0x53eebd22
Exception code: 0xc0000005
Fault offset: 0x0000000000024ac8
Faulting process ID: 0x1448
Faulting application start time: 0x01cfe6c7bd37e765
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Faulting module path: C:\windows\SYSTEM32\ntdll.dll
Report ID: 072b7ff9-52bb-11e4-825f-600292e27add
Faulting package full name:
Faulting package-relative application ID:

Well it came installed on my brand new Windows 8 pro w530 I received 4 weeks ago and has never worked. When you try to open power manager it just crashes. If you uninstall it the Lenovo software just keep reinstalling it. If you uninstall the Lenovo PM driver but do not reboot you can then open Power Manager. The minute you reboot the Lenovo software reinstallls the driver.
Why would Lenovo install software on a brand new Windows 8 laptop that is broken and useless? Tech support is absolutely no help they transfer you to the software department which wants to charge you to fix a problem that Lenovo created!!! It is crazy!! I was hoping someone here could solve this problem or maybe someone at Lenovo would see this and get the problem resolved. Tech support has been useless. I reported the problem to them at least 5 times.

HT1414 I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my OC runs under Windows 8.1. IOS 7.1. Someone can help me, please?

I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?

It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant.

Presario CQ 71 - Built in Webcam not detected under Windows 7 Professional - No HP-101 device

I have a Compaq Presario CQ 71 EB400. On this notebook I run both Windows 7 Home Premium 64-bits and Windows 7 Professional 64-bits to compare behaviour of apps and windows features in both environments.
Windows 7 Home on my HD C partition
Windows 7 Professional on my HD F partition.
The CQ 71 has a built in Webcam, that shows up under Windows 7 Home premium Device Manager - Imaging Devices (Cameras and Scanners) as HP-101, linked to the required drivers.
Under Windows 7 Home premium:
- The built-in CQ 71 Webcam is detected and operational - the HP-101 entry is present in Device Manager.
- Applications using a Webcam like Skype, Mycam, Manycom etc connect with the Webcam
- When I plug in an external Webcam, thet webcam is detected as well, drivers loaded etc.
Under Windows 7 Professional:
- The built in Webcam is not detected, in the Device Manager -Imaging Devices, the HP-101 Webcam entry is absent
- Skype, Mycam, Manycam cannot find a Webcam (also not when an external USB Webcam is plugged in)
- A plugged in external Web cam is not detected as an imaging device.
I use a Brother printer/scanner/fax machine, the Brother scanner device is visible as Imaging device in Device manager in both Windows 7 Home premium and Windows 7 Professional.
Other USB devices, portable disks, card readers etc seem to work OK in both Windows 7 environments.
The HP support pages provide information what to do when a internal Webcam is not detected; The recommended actions make no difference. Going back to a previous W7 Prof restore point is no option, as on the CQ 71 notebook the built-in Webcam never functioned under W7 Professional.
The major difference is that all Windows 7 Home Premium relatede system software resides on the C partition, all Windows 7 Professional system software on the F partition.
I'm looking for a way to kickstart the built in CQ 71 Webcam under Windows 7 Professional installed on a non-standard partition.
Your suggestions will be very welcome.
Jan Dijckmeester.

Hi again jdij,
It is good to hear back from you!
To enable your system to detect the Webcam in Windows 7, I recommend re-installing the original drivers and software that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
If the webcam is still not detected, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP OfficeJet J6410 won't install under Windows 8

Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,

Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance,

Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

Hi,
I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
The printer works fine on my other laptop with Vista on it. Help!

Hi peshi77,
Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Once downloaded, please follow the on screen instructions. I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

D2kwutil running with Forms6i under Windows XP

Hi
I'm trying to run D2kwutil.pll version 6.0.6.0 with Forms6i 6.0.8.8.0 under Windows XP and it's not working when I try to call WIN_API_FILE package. I tryed to run the demo form (WAPIDEMO) that I downloaded with the PLL but they don't run either - As a matter of fact, this form don't open.
Does anyone know what can I do to solve, I mean, to run this PLL under Windows XP - if it is possible?
Thanks
Joco Novaes
System Analyst - CREMESP
[email protected]

How can anyone help if you don't describe the problem? Saying "it doesn't work" is of no value whatsoever.
Regards,
Robin Zimmermann
Forms Product Management Not to be critical or anything Robin, but publicly berating and humiliating your customers doesn't help anyone either.
This is especially true when its obvious from the name and the return email address that the person is Brazilian and is at least making the attempt to communicate the issue in English. Would you have understood their problem better if they'd used their native tongue? Obviously something didn't translate well - and it came accross as "its broken".
And by the way, the customer did describe some of what was wrong... they attempted to open a specific demo form, which came bundled with the PLL file from YOUR company, and it wouldn't even open. They are running XP and Forms 6i, which as far as I last knew was not a certified product combination (which is likely part of the problem).
A little effort (and a kind word) might go a long way toward finding a solution. And if you're just burnt out or having bad day, try to remember that its not OUR fault.
With all due sincerity,
John Julian
john (dot) julian@verizon (dot) net

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007

LiveCycle ES 8,2 JBoss : will it work under Windows PC 2007 virtual machine? (Turnkey or non turnkey version)
Thanks
Yog

great - another few hundred pounds I'll have to spend..... thanks adobe... more profit for you... but here is another question what about cs4? is that compatible with windows 8 as I have a web standard version, what ever that means but I dont have photoshop for CS4 as I got it for the web desing ...and there no chance of using your cloud thingy 'cos I aint spending $50 a month !!!!
can anyone suggest what I should do - I have my original Photoshop 6, then I purchased CS2, following that I got CS4 Web standard as I was doing a Dreamweaver course and the CS4 came as part of the course but with no photoshop. Now I use adobe bridge and photoshop extensively, these are the 2 I realy want and with Cs2 it worked great as it upgraded Photo 6 to cs2 and I got Bridge NOW I GOT NOTHING !!!! how frustrating

Camera under Windows 10

Similar Messages

Maybe you are looking for