Camera & video not working right

On my iPad the back camera & video does not work all of a sudden. It freezes on the shudder screen & doesn't open. Also on the front camera when I take a picture it appears right but in my camera roll it is flipped. Any suggestions on what to do & how to fix this?

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Similar Messages

Camera/Video not working

All of a sudden my camera and video do not work on my curve, i took the battery out a few times, nothing happened, any suggestions? would sending service books fix it?

Upgrade your device to the most recent OS release for your model.
See the link below, for the download and simple installation instructions.
http://www.blackberryforums.com/general-8300-series-discussion-curve/220642-latest-os-8330-4-5-0-311...
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Camer Videos not working iPhone 5S

TTaking a video with my camera no longer works. This is iPhone 5S. the red shutter button functions and it shows its recording but when I click the button to stop I hear a beep and it stops. However there is no video saved in the photos of the recording. Have the latest iOS 8.

Hello there, bobsTouch.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues when iOS is not functioning as expected and may help you in resolving the issue with your Camera app:
iOS: Not responding or does not turn on
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Multi-cam sequences not working right

Ok so I am working on this ballet and I have created multiple multi-camera edited sequences. I placed the edited multi-cam sequences all in a new sequence together and only one camera angle shows up. What am I doing wrong? And is there a limit on the number of sequences you should make that contain other sequences?

Personally, I like the workflow of taking each segment into Encore as its own timeline (as long as it was a logical unit to begin with - scene, musical number, etc.). Use playlist to do a play all, and the "scenes" are already set.
Did you do the test I suggested with one sequence? I just don't see how you could have the problem you had. I just did a quick test; edited multicam sequence brought into a new sequence: I see the edited version.
Are you sure you are bringing in the edited sequence and not the original (multi-video track) version?

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Please help me how to fix the yahoo messenger video call camera was not working have a line appear color green

My new iPad air is not working the yahoo messenger video call pls help thanks

Hello Evaorange
If you are having an issue with the app downloaded form the App Store, check out the general troubleshooting article below to resolve the issue. If the camera is not working in that app, check other apps to see if the camera is working besides in that app.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

FaceTime Video camera is not working

after updating my OS in Macbook Air, my Video camera is not working. pls suggest me about how to fix that and make video working.

If restarting Mac does not fix, see How to Troubleshoot iSight - Apple Support.
If needed, you could also try Reinstalling OS X.
Message was edited by: EZ Jim
Mac OSX 10.10.1

Video not working in Nokia Camera (Lumia 920, Lumi...

Hi,
I've just noticed that the video function of Nokia Camera is not working.
The camera function *is* working.
Video *does* work using the standard Camera app. (so the camera _can_ take video!)
I've reset the camera, restarted a few times, still no joy.
this is for v4.5.1.7 on a Lumia 920 running Lumia Black software.
Ian

Try uninstalling and reinstalling the Nokia camera app.

Camera App - Not Working "error.4003"

I am receiving the error.4003 for the camera app. This affects both camera and video modes. The front facing camera does not work through the camera app, but works fine if used via the video chat app. This appears to be a software error as the touch screen interface controls in the camera app are not completely functional or have a severe response time lag as compared to normal touch screen response time.
Apparently worked fine a month ago. Pictures taken looked great.
At first the error message received on the camera app stated camera was already in use. Not the error above is all I get.
I've done research via the Web and the only responses thus far is to send this into RIM. But too many people are experiencing this error and the posted ideas on other forums are either questionable or IMO not acceptable.
Also the screen capture cameramode works fine. No problems.

From everything I hear 4003 is a "hardware" malfunction.
It happened to me as well right AFTER the 1032 OS upgrade - how's that possible>?
Probably blows a resister or something.
I had warranty left -and got a brand new Playbook in return this week. The turnaround took only a few days by FedEx.
Why so fast? It can't be fixed - so they're just tossing the old ones and replacing them.
I received a brand new identical model (32g) - however it wanted to go to the 1032 upgrade step during intial setup.
i was hoping to avoid that. Did it anyway - no choice.
Happy to report - cameras are both working.
NO explanation of the hardware fault by RIM - what it is or what causes it.
If you have warranty - just call support. They're breaking it somehow - it's not YOU!
Get it replaced before your warranty runs out.
TL

I phone camera is not working after the update

I have an iPhone 4S 16 GB, It worked perfectly under iOS 7.1.2. . . I upgraded the OS to iOS 8.0.2 about two weeks ago. ( Bad Move )
I noticed right off that my device was running a little slower, lagging, and worst of all my "Camera" App does not have an image At All ! ! !
The Flash options, HDR options, Timer options, will switch back and forth, but that is all that works, none of the bottom selections work at all,
and when you hit the front/back camera icon, it freezes /locks the options that did work. I have done a deep restore twice on the device,
restored as New Device, still no change at all on the behavior of the Camera operation. One thing I did find out though, it is a Glitch in the iOS
software, pertaining to the Cameras Operation, reason being, is that I can go into the preinstalled Game Center App on the iOS 8, click on Add Photo,
click on Take Photo, and there are my cameras, working perfectly, front & back. I have done a lot of research on this issue over the past two weeks,
Reading Apple's own Compatibility Devices which start at iPhone 4S and later for the iOS 8.0.2, But, If you go into the iPhone iOS 8.0.2 Operators Manual, go to camera section, you will see that there are several of the New functions of the Camera that are only compatible with iPhone 5 and later. Leaving the iPhone 4S not capable of executing the full capabilities of the New Camera App. I've chatted with Apple Online Chat Support for several hours two days ago, the only resolve they had was to send the device in or take it to an Apple Store and they would correct that issue "Free of Charge", even though ,my iPhone is 3 years out of warranty, because it is a Software related issue.... All I wanted to do is find a way to revert back to iOS 7.1.2, I found out very quickly, that is Impossible to do, because it violates Security Issues and Apples Terms of Agreement," Leaving them Not Responsible for any issues what so ever that occurs to your device downloading the iOS 8.0.2. . Which in my opinion, is pretty messed up. . What is the Big Deal of reverting back to any iOS you want, Apple should support every iOS version they have, not the users fault that a New iOS does not work right on their device, slowing it down, etc...I run Windows 7 on my PC, I can revert back to any OS I want, no problem at all.. . Anyways, back to iPhone issues, The other issues I got with the upgrade is that, My device will not power back on after I power it off now, I have to do a reset to get it to booted back up and running, and when I do so, there is a white halo that appears on my screen for several hours, then it will finally dissipate (no idea what that's all about), , Also, the battery life is much shorter now, had much better battery time on iOS 7.1.2 . . . Apple Support said that my Case was the first they have heard of, which surprised me.

Is anyone having a solution for this????? don't say that to sell the phone or upgrade it to the next version? I want to use this phone as it was a last gift given by one important person in my life and can't throw it away, please give me a solution.

IPhone 4S cameras do not work after iOS 8 upgrade

I have an iPhone 4S 16 GB, It worked perfectly under iOS 7.1.2. . . I upgraded the OS to iOS 8.0.2 about two weeks ago. ( Bad Move )
I noticed right off that my device was running a little slower, lagging, and worst of all my "Camera" App does not have an image At All ! ! !
The Flash options, HDR options, Timer options, will switch back and forth, but that is all that works, none of the bottom selections work at all,
and when you hit the front/back camera icon, it freezes /locks the options that did work. I have done a deep restore twice on the device,
restored as New Device, still no change at all on the behavior of the Camera operation. One thing I did find out though, it is a Glitch in the iOS
software, pertaining to the Cameras Operation, reason being, is that I can go into the preinstalled Game Center App on the iOS 8, click on Add Photo,
click on Take Photo, and there are my cameras, working perfectly, front & back. I have done a lot of research on this issue over the past two weeks,
Reading Apple's own Compatibility Devices which start at iPhone 4S and later for the iOS 8.0.2, But, If you go into the iPhone iOS 8.0.2 Operators Manual, go to camera section, you will see that there are several of the New functions of the Camera that are only compatible with iPhone 5 and later. Leaving the iPhone 4S not capable of executing the full capabilities of the New Camera App. I've chatted with Apple Online Chat Support for several hours two days ago, the only resolve they had was to send the device in or take it to an Apple Store and they would correct that issue "Free of Charge", even though ,my iPhone is 3 years out of warranty, because it is a Software related issue.... All I wanted to do is find a way to revert back to iOS 7.1.2, I found out very quickly, that is Impossible to do, because it violates Security Issues and Apples Terms of Agreement," Leaving them Not Responsible for any issues what so ever that occurs to your device downloading the iOS 8.0.2. . Which in my opinion, is pretty messed up. . What is the Big Deal of reverting back to any iOS you want, Apple should support every iOS version they have, not the users fault that a New iOS does not work right on their device, slowing it down, etc...I run Windows 7 on my PC, I can revert back to any OS I want, no problem at all.. . Anyways, back to iPhone issues, The other issues I got with the upgrade is that, My device will not power back on after I power it off now, I have to do a reset to get it to booted back up and running, and when I do so, there is a white halo that appears on my screen for several hours, then it will finally dissipate (no idea what that's all about), , Also, the battery life is much shorter now, had much better battery time on iOS 7.1.2 . . . Apple Support said that my Case was the first they have heard of, which surprised me.
<Edited By Host>

I'm not quite clear on how your phone is working right now. I also don't know what "every possible thing" means so here is what you can do to troubleshoot software issues yourself. To be safe do a backup before doing anything.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iOS device to factory settings - Apple Support
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Just so you are aware, now that you've had a local hardware person repair the phone you no longer have any warranty or service support from Apple. Good luck.

My built in camera is not working after upgrading to a new Skype version

my built in camera is not working after upgrading to a new Skype version

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

Lumia 920 Camera App not working with 8.1

Hi there, Just had the Cyan update.   Camera app just shows black screen, both for video and camera.
Did soft reboot, hard reset, etc.    Took to repair shop and they installed new camera.   Not working
They did a reinstall back to factory and still no joy.
Nokia Lumia 920
Carrier At&T
Windows 8.1
OS 8.10.12393.890
Please help?!

RobRoy_cro wrote:
Hi..i have same problem then i make nokia pro cam as default and turn off "more tile" in settings and now everything works
I hope this help
Thanks. Only had microsoft camera, so downloaded the Nokia Camera. Could not find a "nokia pro cam"
Also where in settings is the "more tile" option?
Nokia camera now is just the black screen, no options.

FaceTime HD Camera (Display) not working with most applications

The Thunderbolt 27" LED Cinema displays built in camera is not working with most applications. The camera does not work with FaceTime, iChat, Skype and Google Talk. FaceTime says "There is no connected camera", even though there is. Weird thing is it DOES work at http://www.testmycam.com. I can't get it to work with any other flash based apps, just testmycam.com.
My MacBook Pro 17" (late 2011) built in camera works perfectly with everything.
Things I've already tried:
- Shutdown
- Restart
- disconnect/reconnect
- removing power from display
lame, lame, lame. $1k monitor, flippin' webcam doesn't work.

I think I have found the problem. I decided to go page by page through the forums and found this argument when running a Java program through the console:
-Dsun.java2d.noddraw=true
So it would be like:
java -Dsun.java2d.noddraw=true SwingSet2
That works flawlessly, so it has to do with direct draw (So it's either DirectX or my video card drivers which are up to date).

Hiya, my ipod touch 4th generation cameras are not working.

Hiya, my ipod touch 4th generation cameras are not working. I had the screen replaced about a month ago and it was working fine. I woke up the other day and went on my camera and it had stopped working, it won't let me change from the front to back camera so i don't know what the problem is: now all it shows when i go on the camera app is the shutter or a black screen. I have tried the advice people have said but it hasn't seemed to work. Any help would be appreciated!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
However, it other than Apple or an Apple Authorized Service Provider did the previous screen replacement , Apple will not help.
For the future, saying that you tried the advice people have said, provides us with zero information as to what yu tried.

Camera & video not working right

Similar Messages

Maybe you are looking for