Camera view and take a very different color than 1st gen iPhone-Pls advise

I'm new to the forum. I just recently purchased a 3GS for my wife as a gift.
I noticed her photos, especially indoor, appears more orange-tinted than my original 1st gen. iPhone. The difference is very noticeable when you put side by side for view and snap photo. Note: both phone is currently running on verion 3.0
Does anyone have sugestions as to adjust the white balance?
I dont want to take it back to iPhone store b/c it was jailbreak phone that I brought from an independent store.
Any help is greatly appreciate.
Message was edited by: Salgw

Similar experience to Salgw here. On the 3GS photos are markedly less warm and vibrant than my wife's OG iPhone, which gives consistantly great results. On the 3GS using the photoshop app one can adjust values to approach a better image, a cumbersome process.
Still, is there a simple workaround to get images like the OG iPhone produced? Is there even an app that does this w/o much fussing around?
Thanks,
dufusprime

Similar Messages

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent

Is there a way to change the color of the Bezier Curves and points to a different color other than black I find it perplexing while setting points and curves working on a photo that needs to be separated from it's background for placement on transparent backgrounds. Any thoughts?

Yes. Well, sort of: instead of a "path", set the pen tool to "shape" in the tool properties. Then set the fill colour to transparent, and the stroke colour to the colour you want. You can also set the stroke width.
Not perfect, but at least you can see the path more clearly - the anchor points and handles still remain the default colour. Open the path panel, and right-mouse click the path shape to create a selection based on that shape. The Paths panel menu also allows you to create work paths based on that shape.
Unfortunately when you try to move the handles the black thin outline appears again until you release the mouse button.
This is one of several things that works better in Photoline: in Photoline, once the path is set to a specific colour, editing the path uses the actual colour and stroke width. which is extremely handy for creating path based selection with awkward background colours and/or a high resolution screen. In Photoline the handles and bezier points are also much, much larger, which makes it rather simpler to work with as well - especially on a higher resolution screen. And when selected the handles and points are a clear red with a black outline - again easier to spot and identify. I just works better, in my opinion.

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothi

I'm using windows 7, trying to download pictures from my canon 5d mark 2, but when I click import, the camera does not appear. I've tried changing USB ports, switching the camera on and off, trying a different USB cord, tried a different camera, but nothing. Please help! This problem only started a few days ago on lightroom 3.6, upgraded to 5.5, but still not working. Thanks.

Can you see the Canon EOS camera and image files using Windows Explorer? If not disconnect the camera, close all applications' shutdown Windows, and TURN OFF the power to your system and ALL connected devices. Disconnect all phones, iPads, and any other USB devices and restart your system.
Retry Windows Explorer and see if your camera is showing. If so try LR import again.

Link to DL Linksys Multi Camera Viewer and Recorder Utility

I read that the Multi Camera Viewer and Recorder Utility is backward compatible. I have 2 WVC54G cameras and I would like to use it for them. Can someone provide a link to download the Multi Camera Viewer and Recorder Utility?
Thank you.

Click here

How can I make a link a different color than the other links according to the current page?

Hello. I have created a navigation bar. And I would like to style the links to have the current page link a different color than the other links. For example, if all of the links have a black background, I would like to have the current page link to have a white background. The reason that I would like to style them this way is so that the visitor knows what page is being visitied.
I tried different ways but all of them did not show to make any change to the links. This is what I have so far. The links work, but all of them have the same color and background. When on the home page, I would like to have the home page link to have a white background with black letters. I would appreciate your advice.
<head>
ul {
    list-style-type: none;
    text-align: right;
    padding-top: 10px;
    padding-bottom: 6px;
    padding-right: 10px;
li {
    display: inline;
a:link {
    color: #FFF;
    background-color: #000;
    text-align: center;
    padding-top: 8px;
    padding-right: 8px;
    padding-bottom: 8px;
    padding-left: 7px;
    text-decoration: none;
a:visited {
    color: #FFF;
    background-color: #000;
    text-decoration: none;
a:hover {
    color: #000;
    background-color: #FFF;
    text-decoration: none;
a:active {
    color: #FFF;
    background-color: #000;
    text-decoration: none;
a.menu:link {
     color: #000
     background-color: #FFF;
     text-decoration: none;
</head>
<body>
<div class="navigation">
    <ul>
        <li class="menu"><a href="index.html" target="_self">HOME</a></li>
</body>
Thank you very much.

http://www.itworld.com/development/351097/setting-active-menu-item-based-current-url-jquer y

My iPod touch is downloading and updating apps very slow more than an hour.

My iPod touch 4th gen 32gb verson 4.3.1 is downloading and updating apps very slow more than an hour. I just got it a day ago and I backed up all my apps music and pictures and videos from iTunes. Few months ago I had an iPod touch but I lost it and it was working fine. Luckily before I lost it i backed up everything to iTunes so now everything that was in my old iPod is now in my new iPod. Anyways, When I first bought it I straight away backed up everything and saw that i had many updates on my apps. I started updating it all at once but even the first one was not loading at all and mty ipod was hanging many times during the updates so i cancelled all the updates. i even tried it on my computer and it was taking forever but my laptop does updating and downloading apps slower than my ipod so that doesnt matter. Even when I download an app on my iPod now its take more that an hour. So i was wondering, is my iPod slow cause I backed up too many things when i just got it . I have about 120 apps 150 plus photos and 70 videos and I backed it up all in one night on the day i got my ipod. So now I'm restoring my iPod and updating it to IOS 5 and see what happens. Hopefully it will be faster then but I still need to know what is main problem of m iPod hanging and slow updating/downloading. Need a reply ASAP. Thanks

Still you can switch it off while syncing.
You can also do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)

1st Gen iPhone - ALL songs and videos no longer there. POOF! No sync.

I have not listened to music or watched videos on my 1st gen iPhone in about 2 months. Little did I know, ALL the songs and ALL the videos have disappeared. Gone Poof. I have not synced in a couple of months so it wasn't a result of a new OS. Maybe it's just getting old but has this happened to anyone else? I don't know where they went or when it happened. Gremlins? I am now afraid to reload/sync for fear I will lose pix and contacts. Just want to know if this spontaneously happened to anyone else???

Hey Larry,
I went ahead and did a "restore" and everything was back to normal. It did take a while, though, as it wiped out then re-copied over 7Gigs of data to the phone. It was a hassle, but all is OK. I'm still concerned, though. I also spoke with a Genius at the Apple store who had never seen this, and thought it was a problem with the "file type" in iTunes, but i checked and movies were still "movie" filetype. He suggested MANUALLY checking/adjusting every file, but that is rediculous and there were hundreds of songs and videos!! Anywho, on my iPhone the date outside of the iPod items (music, videos, podcasts, etc.) was not effected, and all is back to normal after a lengthy "restore." Still looking for a "why" on this one...

HT4972 as my iphone version is 4.3.3, and I am failed to upgrade to version 6.0. pls advise how to do ?

As my iphone version is 4.3.3, and I am failed to upgrade to version 6.0. pls advise how to do ?
From Hong Kong - Chun

You can't because iOS 6 is the latest software and you can only upgrade your phone to the latest software, so with iOS 6 being available you won't be able to upgrade to 5.1.1.
What you want to do is not possible, so you will either have to make the decision to upgrade to iOS 6 or not upgrade at all and stick with what you have.

Render tab thumbnail (and output) is very different from the viewer in main color tab.

I'm having a really strange issue with one of my projects. I can't seem to output my footage correctly as seen in the "color" tab in speedgrade. The result is much more blue in hue.
Color tab main viewer:
Render tab thumbnail:
As you can see the thumbnail is much colder than the main color tab viewer, and the final output (both DPX and proRes4444) is just like the thumbnail.
Has anyone here experienced this issue? Is it a known bug? Workaround?
I should mention that I'm working with several gradinglayers. 5 to be exact, doing different adjustments. Does this potential bug have to do with that?
Thank you,
Joan

For starters, it would be good to know which version (especially a build number) you're using of SpeedGrade. You're clearly running in "native" mode to render directly from Sg but could be doing that in anything from the ol' Iridas through CS6 SpeedGrade to a CC version. There are some few changes that came in along the line. Subtle mostly. But useful to know.
It would also be handy to know the codec/s you're grading, and any out-board devices you might have in the video chain from AJA, Kona, MB, whoever ...
I've had gamma shifts at times that were a PAIN to nail down, but I've not had color/hue shifts so much. At least, while there was a slight change in color/hue of a render at the wrong gamma, once I'd corrected the export settings to get the correct gamma the color/hue problems disappeared. There is a very experienced user of Sg for years who might be good at helping ... if Joost van der Hoeven is available.
Neil

Why don't recently viewed websites show in a different color anymore?

Yesterday I updated to Firefox 7.0.1, and now my recently viewed websites no longer display in a different color after viewing a website and going back to the original list of websites. I still want to see which ones I have already looked at when researching. Can you tell me how to get this feature back again?

If you are talking about the color differences between visited and unvisited in the links on your webpages then that that would be affected by any of the following:
# changing the link colors in your Tools > Options > Content > fonts & colors: "Advanced" for which I have blue for Unvisited and magenta for Unvisited links. I have all three items check-marked "Use system colors:, "Underline links:, and "Allow pages to choose their own colors instead of my selections above".
# Loss of history data, such as clearing of your browsing history
#* http://img232.imageshack.us/img232/4928/clearcachew.png
# Private browsing ("Ctrl+Shift+P") will not mark any links as visited, same would apply to permanent Private Browsing ("Always use private browsing mode") in Tools > Options > Privacy
#* http://img232.imageshack.us/img232/4928/clearcachew.png
I left out the link on the following and have added it, but since the above answered the question, I'm changing this last part to a footnote.
None of which would be directly related to updating Firefox, but at such times the localstore.rdf file in you profile may be affected (corrupted), and changes made to your toolbars and options will not stick.
* http://kb.mozillazine.org/Corrupt_localstore.rdf

What would be the simplest way to view and take control over the internet?

Hi All:
Can some one tell me what would be the best and simplest way to connect from my laptop to another laptop through the internet?
I have DYNdns running on the second laptop and have a host name assigned to that system for it to update the IP since the system uses different internet connections. The services that I would like to be able to have are the viewing and controlling of the system. I've read some where in this NG that if I have a copy of ARD admin. installed on that system also, it would be one way to do it... can some one verify this and please let me know if there are any specific settings I need to have on either one of the systems.
I can connect to the second laptop while in my home network with no problem and perform all tasks. when trying to connect through the internet.. the system shows offline .
Both systems are identical in hardware an software, Intel 2.16, 2G's RAM, OS X ver 10.5.2 all up to date and ARD 3.2
Yes, I'm new to ARD and yes I'm searching the NG and the net. but I figure it doesn't hurt to ask since time is limited.
All help greatly appreciated ..
TIA
Oscar A.

To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
Remote Desktop 2: How to specify a port number for a VNC client
to connect.
The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
Hope this helps.

How to underline with a different color than red (in Preview, with Mountain Lion)

Hi,
I'm using Preview to study and I would like to figure out how to underline with a different color please...
Also, Is there a better app to read PDF document and highlight/annote/underline... to study...
Thanks!

In Adobe Acrobat Reader, you can control the color of the underline and the highlight from the Annotations panel. You would bring this into view from the View > Comment > Annotations menu hierarchy. The underline tool by default, has a green underline. You can change the color (and opacity) by right-clicking the green underlined ‘T’ and choose “Tool Default Properties.”
This may have answered your second question if you find it easier to perform your markup with it.

New version of iTunes has bug i.e. downloaded mp3 has very different title than original

When I import the downloaded mp3 the title is very different and offensive words. What is up with this? thnx

mfromevergreen wrote:
How do I reply? thnx
You just did reply.
Type words and click Reply.

I want my 3d Extrude to be a different color than the font face

How do I do this? I don't want a shade of the current color. I need a totally different color.

Quick Way: Stroke your type the colro of your extrusion.
Alterantive: I often do not like to use stroke cause you can get strange anomilys with 3D Extrude, so you can dup a copy on top with no extrusion and tchaneg the color

HUGE 2.0 software problems on both a 1st gen iPhone and new 3g TWO BRICKS

So I waited in line for several hours for the new 3G yesterday like most people get it home and it had the occasional random program crashes etc. No big deal par for the course for being first on the block with a new device - even a Apple product.
My headache started with turning my "old" 1st Gen 16gb phone into a iPod. I installed the 2.0 software through iTunes and all went well until I was testing it out and it restarted. Weird since it gave no problems before. No big deal since I could go back to iTunes and restore it right?
Wrong.
Dead wrong.
It will not get beyond the Apple logo restart screen (yes I left it alone - even over night). I tried different computers, restarting the computer and iTunes. Also tried reinstalling iTunes - nothing works. Okay no big deal since it just going to be my extra iPod.
EXCEPT A HOUR LATER MY 3G IPHONE STARTED DOING THE SAME THING!!!!
Now I have two 16gb iPhones that will not restart or restore - AND NO CELL PHONE SERVICE.
Very, very frustrating. Even as a huge Apple fan I can't recommend this product until it's bit more fully developed.
Now waiting for technical support for well over a hour . . . Thank god I didn't go ahead and cancel my home phone like I have been meaning to.
Any one out there have any ideas?

It looks like a 3rd party application might be the problem.
The good news is tech support got me back on track. The secret? Power down the iPhone, then press and hold down the home button while connecting it to the computer with iTunes up and running. This will get you to the recovery screen. You should be able to then restore the phone. I would say be wary of some of the applications out there.

Camera view and take a very different color than 1st gen iPhone-Pls advise

Similar Messages

Maybe you are looking for