Camera WB setting in LR metadata?

Is is possible to include the camera WB setting (e.g. daylight, cloudy etc, or temp K) in the LR metadata?

I don't believe you can.
Beat

Similar Messages

Leica M9 and Aperture3 not showing camera aperture setting when import DNG files. Shutter speed and ISO are indicated, but not aperture. When I export and open in Adobe Camera Raw aperture setting is displayed.

Does any one have a suggestion as to how to get A3 to show the camera aperture setting on Leica M9 DNG files?

You will want to read this thread in its entirety.
The short story (as I understand it) is that the M9 body receives no information about aperture from attached lenses. It is able to derive an estimate of the aperture, though, and it lists this derived number in the metadata field "Approximate F-stop" (not the exact field name). Aperture (the program) does not report the contents of this proprietary field.

Determining camera pre-set settings in each photo?

Is there a way to see the camera pre-set settings (eg auto, portorait, night, children, etc etc) that are available on most DLSRs? I can see the "file properties" and "metadata" to see fstop / shutter etc, but not which setting was used.
many thanks.

I think most cameras just call this an auto mode as the camera determines specific aperature, focal area, color mode, shutter settings, etc..
All the data should be in the metadata file.

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

What operating system are you using?
Which version of camera raw do you have in photoshop cs6?
After you select the Adjustment Brush, the New button should already be enabled.
Then after you draw on an area of the image, the Add button should be enabled, with the option to choose either of the other two buttons; New or Erase
Could you post a screenshot?
Maybe all the adjustment values are set to zero?
(at least one needs to have a value other than zero)

BriteCam IP Video Camera (BC1800) set up

Hi,
I have recently bought the subject Video Camera and set it up in my laptop, when I connect it @ home the camera work fine but when I try to access it from office to view what is haeppening in home it does not work, please advice how i can view it from any Internet?!!! from any PC or Laptop???!! I mean is it possible to log to specific website to view it?
pls respond as soon as possible.

You need to lock the camera IP address and then forward whatever ports are required to the camera. It all depends on what setup you are using with the TC.. router or bridge.

LG Enact: My camera mode setting will not stay at SPORTS. It keeps jumping back to NORMAL. Need help.

LG Enact: My camera mode setting will not stay at SPORTS. It keeps jumping back to NORMAL. Need help.

Geo0319,
Let's get you snapping those sports moments. Does any other camera mode stay on consistently or do you have to change it everytime. It sounds like it will allow you to take one photo and then it reverts back to normal.
RobinD_VZW
Follow us on twitter @VZWSupport

Quick camera button sets the camera in automatic settings.

Hi,
A friend is having troubles with his Z3 :
He used to take pictures with the quick camera launch button, but since a recent camera or system update, when he use this button, the camera is set to automatic mode instead of manual, with poor resolution and quality settings. If he launches the camera with the standard button from the phone menu, everything is fine and perfectly set up.
When the camera is used from the quick button and set back to the correct quality settings and manual mode, after closing it, it goes back to auto mode with bad settings. Same thing when he slides the camera icon from the locked screen. The only way to get the proper settings when launching the camera is to use the icon from the phone's menu.
He tried a lot of thigs, from uninstalling the camera updtades to searching everywhere on the internet, there is no informations or messages about this problem.
Where is this problem coming from ? The quick button is unusable since that update, it's a shame !
Thanks in advance !

Well not really, I had it too and we are 100% sure that the quick camera button starts the camera in it's deffault settings since a recunt update.
What would be the point anyway of a button like this if the camera isn't usable ?! The aspect ratio is even set to 16:9 in 8mpx instead of 4:3 12mpx…
My friend is so used to launch the camera with that button that now he keeps using it by "error" and take photos that are not proper to use later…
I'm personally using a nexus 5 and had some bad changes after some automatic updates too, but this one on the Z3 simply kill one of it's most useful feature, and since almost nobody is talking about it I'm afraid that it will stay like this forever.

How to Set Individual Managed Metadata Navigation Links to Open in New Window?

I am using a managed metadata term set for the global navigation in my client's site. Most of the global navigation links point to pages in the current site, and should open in the current browser window/tab as the end user is just navigating within the
site content. However, I have one particular node in the navigation term set that points to related content scattered around other external sites. The client wants these links to open a new window.
Unfortunately, I can't seem to set the target for navigation links in the term set. If I was using standard global navigation, I'd be able to select the "Open in new window" checkbox when setting up the link, but that option doesn't appear to be
supported via MMD navigation.
Any clever suggestions?
Thanks!

I had a similarish requirement at a client once upon a time, they wanted any links that went outside of the intranet web applications to open in a new window.
The way we managed that was to use jQuery to overwrite the standard hyperlink references for any hrefs that didn't point to internal sites to use the same javascript functions that SharePoint used for links configured to open in a new window. It worked out
as being about half a dozen lines; check the URL and if it doesn't begin with a set range of options then overwrite the on click behaviour using standard jQuery behaviour.
If you want it site wide then you just add jQuery and the code snippet to the master page, if you just want it in some places then add a CEWP or a HTML form web part to the relevant pages.

Set Empty Managed Metadata Column - Working in 2010 and not in 2013

I have seen posts similar to mine below but am still not finding a solution. I understand that setting an already populated managed metadata column can be problematic using SPD. However, my column is empty, and what works in 2010 is not working in 2013.
Issue: In SharePoint 2010 On-premises, I am able to set an empty Managed Metadata column on a file in a document library via SPD workflow using the following format:
ID;#Term|IdForTerm
In SharePoint 2013 Online, I am attempting to create a SPD workflow to do the exact same thing (ID;#Term|IdForTerm) and am experiencing the following results depending upon the type of workflow I try:
- SP 2010 Workflow - The workflow status result is Completed, but the managed metadata column remains empty.
- SP 2013 Workflow - The workflow internal status becomes Started and effectively remains this way until I end the workflow.
Any thoughts on what needs to change for 2013 when doing this?
Thanks in advance for any help or guidance.
Alan

Hi,
I try to reproduce the issue in my SharePoint Online environment, however, everything works well.
I create term set as below:
Then start the workflow and the value in the browser view. The result is as below:
I recommend to create another managed metadata column to check whether it works.
Or you can create another library to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Ipad Camera Photo - set to take periodic photos automatically. Not video time lapse.

In prep for Hurricane Sandy.... I would like to set my ipad to a bayfront scene, set it to take a photo every say 10 minutes, and leave it. I have tried a couple of the timelapse apps, but they collect the discrete images and create a video. What I would like as the outcome is a set of photos, as if I had stayed and hit the shutter button every ten minutes from the location. Any suggestions are welcome!

liamua wrote:
Hi,
Photos is probably better than iPhoto for personal images, BUT:
I need to make the new Photos app not open automatically every time I plug in an iPhone or iPad or camera into the computer.
I take a lot of photos for work and I import those through the Image Capture App which allows me to import photos into a specific set folder - not my photos folder.
In iPhoto>Preferences>General, set Image Capture as the default camera handler.
liamua wrote:
Also, related, how do I make iTunes not automatically open when I plug in the iphone/ipad. I keep my music on one computer and not on my work computer, so it is annoying when I plug an iPhone or iPad into the work computer and it automatically opens iTunes.
In iTunes (with the device pugged in) Preferences, disable the 'Open iTunes when device is plugged in' option.
liamua wrote:
Finally, what happened to the delete function on the Image Capture app? It was so easy - import a bunch of photos into a certain folder, then delete those photos off the device through Image Capture.
It's still there (on my Mac)
liamua wrote:
Apple, by forcing us to use your consumer products, you are making it so inconvenient for pros who want more control over our process and file structure!
We are just Apple users (like you), we did not do anything. (Including forcing you, nobody did that)
Perhaps you would like to complain to Apple instead of us? Send Feedback to Apple here.

Lost Camera Raw Info Displayed in MetaData Panel.

I have lost all the CR preferences that I checked of in the Metadata Preferences in Bridge Preferences.
The "Camera Raw" arrow shows it is open and it displays the CR filename but nothing else even though the boxes are checked.
Any hints on what happened? Worked fine yesterday.
Dan

No one ever encountered this phenomina eh??
Also "Preview" panel tab missing.

Set filename to metadata field

I'm currently in the process of building a Final Cut Server workflow.
One part in the workflow is to trancode an asset to MPEG2 for broadcast. We use conventional filenames, so if we trancode the file should get a given filename and title. In FCSRV I created a metadatafield called 'filename'.
I already succesfully created a subscription which encodes the file to MPEG2 if a metadata field is set on 'true'. But now I want to add to that subscription that the filename and the asset's title are set to the specified metadatafield. Is this possible?

Another update:
I just tested it using the direct location to the file:
Command: /bin/cp
Parameters: /Volumes/Xsan/Media/test.mov /Users/accountname/Desktop
And this command actually works.
So there must be something wrong with the parameters I'm using
So I tried the following:
Parameters: [[File Name]] /Users/accountname/Desktop
this results in a "no such file in directory" notice. On the other hand the [[File Name]] is replaced by the right filename.
So I thought, I must get the location of the file to get I good copy action.
I eventually got this working:
Parameters: "/Volumes/Xsan/Media/[[File Name]]" /Users/accountname/Desktop
The brackets are mandatory.
But I think this could be made easier using also fields from Final Cut Server, like:
"[[Local Directory]]/[[File Name]]" /Users/accountname/Desktop
The [[local directory]] is the field in FCSrv where the device location is stored, but the parameter is not recognized by FCSRV. Is there another way to get the path where the file is stored?
Next step I'm investigating now is to change the filename by a custom field in Final Cut Server.
I'll keep you posted.
Message was edited by: StefSOFT

My Camera mode set to "Negative Filter" in Iphone 4 and updated to IOS 7.

My iphone's camera mode is set to Negative Filter, that is whenever I take a photograph it is displayed in the form of a negative rather than the usual image. I am using Iphone 4 and IOS 7. I am not able figure it out how to do.

Hi, RameshMichaels.
Camera effects are only available on the iPhone 4s and later. It sounds like Invert Colors is enabled in Accessibility. This will usually cause the whole display to reflect an inverted color scheme. Go to Settings > General > Accessibility and turn Invert Colors off. Check to see if the camera functions as expected.
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Cheers,
Jason H.

Camera is set to sRGB, but Aperture metatdata says Adobe RGB

I have my Canon 40D's color profile set to sRGB, even though I get the impression that it serves no purpose if I am shooting RAW images (which I am). Even if it makes no difference in RAW, I still have to choose a profile in the camera's settings (I guess in case I switch to shoot JPEGs). Anyway, why does the EXIF Expanded metatdata in Aperture say "Adobe RGB"? Should I, and how do I, change that in Aperture?
And does this matter?

Adobe RGB gives you a wide range of color, while sRGB give you less color. Since RAW files give you a lot of information, Aperture works with them in Adobe RGB. As mentioned in other posts, you can always export in sRGB. Personally, the only time I would use sRGB is for website photos or online photo labs when they request sRGB files. It is always best to start out with a lot of color and work your way down rather than the other way around. Down the road if you make something like fine art inkjet prints, you will be glad you have RAW files with the Adobe RGB color space.

Importing camera picture setting with raw file

Is there a way to import my raw file with the camera picture settings from my camera. I use a personally edited version of the camera vivid from my d300. The files are imported without the settings and get set to adobe standard in my camera calibration. I use lightroom 4 with cs5 64 bit.

No is the short answer. Adobe and Nikon are not the same company so don’t have access to the other’s intellectual property and don’t know what the other does to decode the raw data, so neither can be expected to respect the other’s raw engine’s adjustment settings. Your question is the same as asking if Nikon software could use the Adobe XMP data to duplicate how things look in Lightroom.
The DNG Profile Editor is a way for you to tweak the existing camera profiles to your liking in Adobe products.

Camera WB setting in LR metadata?

Similar Messages

Maybe you are looking for