Camera won't capture image

Camera will not capture images. Purely states 'unable to capture image'. Video camera comes up with coloured lines, no image. Reasonably new handset, have tried rebooting and clearing down all apps. Any ideas??

Sounds like a hardware problem to me but i could be wrong. Try backing it up and doing a security wipe and see if it helps.

Similar Messages

Camera won't capture credit card for Apple pay

When I attempt to use the little blue camera icon option in Apple Pay to capture a credit card and it's info, nothing happens. The camera won't capture a picture of my credit card. I hold my phone camera hovering very still over my credit card making it's sure it's within the guideline over and over and nothing happens.
I know my bank and my credit card support Apple Pay.

Hi ...
Make sure your iPhone is updated to iOS 8.1
Tap Settings > General > Software Update
If it's already running 8.1, try a reset.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings then try again.
Instructions for setting up Apple Pay > Apple Pay

My Video Camera won't capture sound!

My camera will not capture sound! I have done loud things to test it while recording, turned my sound all the way up, and played it to hear nothing. I put in headphones to try it, and once again i heard nothing. I was sure it was recording when I spoke and I know that there was supposed to be noise. What is wrong with my Nano?

Run through these troubleshooting steps to see if this solves your problem. Let us know if this does it for you.
http://www.apple.com/support/ipod/five_rs/nano5gen/
i

My sony hdv 1080i mini dv camera won't capture

I've been trying to capture a video that I recorded with my SONY (HDV) HDR-FX1E camera from sony hdv 1080i mini dv but the camera would go on playing but it won't display any frame and it would show this error when i click stop stating that "recorder captured no frames". When its playing from the sony hdv 1080i mini dv camera it shows DV SP PAL on the lcd monitor.
PLEASE, someone should help me, I need to capture this video now.

As far as I know, HDV does not display during transfter from camcorder via Firewire
Try this for HD capture http://strony.aster.pl/paviko/hdvsplit.htm

SCCM won´t capture image after ZTIWindowsUpdate

Hi!
We are running SCCM 2012 R2 and are using ZTIWindowsUpdate.wsf
to update our images.
Now we are having trouble that the image doesn't get captured after we have ran
ZTIWindowsUpdate.wsf in a Build and Capture OSD.
This is the last entries from ZTIWindowsUpdate.log:
More to install, Please reboot and run again!
ZTIWindowsUpdate 2015-04-09 16:38:27
0 (0x0000)
Property SMSTSRetryRequested is now = true ZTIWindowsUpdate
2015-04-09 16:38:27 0 (0x0000)
Property SMSTSRebootRequested is now = true
ZTIWindowsUpdate 2015-04-09 16:38:27
0 (0x0000)
ZTIWindowsUpdate processing completed successfully.
ZTIWindowsUpdate 2015-04-09 16:38:27
0 (0x0000)
Running ZTIWindowsUpdate.wsf is the last step in the Task Sequence before the capture.
There are 41 updates and according to the log they all get installed properly.

The link Torsten supplied is the best place to start. Make sure you are not installing any updates that require multiple reboots. You can exclude those updates using something like this:
https://scriptimus.wordpress.com/2012/03/22/mdt-2012-automating-updates-in-lite-touch-deployments/
Jeff

Automatically start FrontCamera and capture image

Hi. I'm new in iphone. I want to make a camera application in which i want to start front camera automatically and capture image without user interaction. thanks in advance.

No such option available with the iPhone.

How to Compare Two Camera's capture Image in j2me

i want to know ,how to compare two Camera's capture image in j2me,
in my midlet application i used MMapi to access Camera.& capture two image through Camera. Then i want to store new image instead of previous one in mobile phone memory.
Please tell me how that comparing will done.
thanks in advance.

Hi,
I didn�t know about the image comparison, but here is one more idea to store the new picture, whenever you captured the picture take the time and when you take another picture compare the times of both pictures then save the picture with latest time.
But there is one flaw in this approach, if user explicitly changed the time and captured the pictures it won�t work properly.
- satdmail -

Capture images (JPEG) from IP-Camera

Hey there!
I have been trying to capture images from an IP-Camera. I understand that this has to be done by using a custom DataSource and I have tried many many example found here on the net, but with no results.
I think I've tried every piece of code found here at this forum regarding this subject.. :/
The best I could do was not getting an error while creating a custom DataSource from a BufferedStream..but the when I try to configure/realize the Processor - created with Manager.createProcessor(customdatasource) - it gives me an error which, I think, has something to do with unrecognized content..
I could post all the examples I tried but I think it would be too much of a confusion so...does anyone have a full working example of code to achieve this? WITH the frame grabber class? plizzzzzzzzz?
Thanks,
Edd

I felt Captfoss' solution was inspired and so gave it a go. The following builds a video from an ip cam jpg stream using a version of Sun's JpegImagesToMovie.java. It is hacked together quickly and with scope for improvement, but it works, proves the idea, and is a good example.
Run as:- java JpegImagesToMovie -w 320 -h 240 -f 30 -o file:test.avi
* @(#)JpegImagesToMovie.java     1.3 01/03/13
* Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved.
* Sun grants you ("Licensee") a non-exclusive, royalty free, license to use,
* modify and redistribute this software in source and binary code form,
* provided that i) this copyright notice and license appear on all copies of
* the software; and ii) Licensee does not utilize the software in a manner
* which is disparaging to Sun.
* This software is provided "AS IS," without a warranty of any kind. ALL
* EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
* IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
* NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE
* LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING
* OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS
* LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT,
* INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF
* OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
* This software is not designed or intended for use in on-line control of
* aircraft, air traffic, aircraft navigation or aircraft communications; or in
* the design, construction, operation or maintenance of any nuclear
* facility. Licensee represents and warrants that it will not use or
* redistribute the Software for such purposes.
* Some public domain modifications by Andy Dyble for avi etc by self and from
* other internet resources 19/11/2008. Reads editable 20 ip cam network jpg files.
* Supported formats tested for compression options. This code could be much improved
* further to these amendments. Absolutely no warranties. www.exactfutures.com
import java.io.*;
import java.net.*;
import java.util.*;
import java.awt.Dimension;
import javax.media.*;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.datasink.*;
import javax.media.format.VideoFormat;
import javax.media.format.JPEGFormat;
* This program takes a list of JPEG image files and convert them into
* a QuickTime movie.
public class JpegImagesToMovie implements ControllerListener, DataSinkListener {
    public boolean doIt(int width, int height, int frameRate, Vector inFiles, MediaLocator outML, String outputURL)
     ImageDataSource ids = new ImageDataSource(width, height, frameRate, inFiles);
     Processor p;
     try {
         System.err.println("- create processor for the image datasource ...");
         p = Manager.createProcessor(ids);
     } catch (Exception e) {
         System.err.println("Yikes! Cannot create a processor from the data source.");
         return false;
     p.addControllerListener(this);
     // Put the Processor into configured state so we can set
     // some processing options on the processor.
     p.configure();
     if (!waitForState(p, p.Configured)) {
         System.err.println("Failed to configure the processor.");
         return false;
     // Set the output content descriptor to QuickTime.
     if(outputURL.endsWith(".avi") || outputURL.endsWith(".AVI"))
          p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.MSVIDEO));
     if(outputURL.endsWith(".mov") || outputURL.endsWith(".MOV"))
          p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.QUICKTIME));
     // Query for the processor for supported formats.
     // Then set it on the processor.
     TrackControl tcs[] = p.getTrackControls();
     for(int i=0;i<tcs.length;i++)
          System.out.println("TrackControl "+i+" "+tcs);
     Format f[] = tcs[0].getSupportedFormats();
     if (f == null || f.length <= 0) {
     System.err.println("The mux does not support the input format: " + tcs[0].getFormat());
     return false;
     for(int i=0;i<f.length;i++)
          System.out.println("Supported Format "+i+" "+f[i]);
//     tcs[0].setFormat(f[0]);
     if(outputURL.endsWith(".avi") || outputURL.endsWith(".AVI"))     // must be VideoFormat
          System.err.println("Setting the track format to: "     // INDEO50 CINEPAK f[0] etc
               + tcs[0].setFormat(new VideoFormat(VideoFormat.INDEO50)));
     if(outputURL.endsWith(".mov") || outputURL.endsWith(".MOV"))
          System.err.println("Setting the track format to: "     // JPEG CINEPAK RGB f[0] etc
               + tcs[0].setFormat(new VideoFormat(VideoFormat.JPEG)));
     //System.err.println("Setting the track format to: " + f[0]);
     // We are done with programming the processor. Let's just
     // realize it.
     p.realize();
     if (!waitForState(p, p.Realized)) {
     System.err.println("Failed to realize the processor.");
     return false;
     // Now, we'll need to create a DataSink.
     DataSink dsink;
     if ((dsink = createDataSink(p, outML)) == null) {
     System.err.println("Failed to create a DataSink for the given output MediaLocator: " + outML);
     return false;
     dsink.addDataSinkListener(this);
     fileDone = false;
     System.err.println("start processing...");
     // OK, we can now start the actual transcoding.
     try {
     p.start();
     dsink.start();
     } catch (IOException e) {
     System.err.println("IO error during processing");
     return false;
     // Wait for EndOfStream event.
     waitForFileDone();
     // Cleanup.
     try {
     dsink.close();
     } catch (Exception e) {}
     p.removeControllerListener(this);
     System.err.println("...done processing.");
     return true;
* Create the DataSink.
DataSink createDataSink(Processor p, MediaLocator outML) {
     DataSource ds;
     if ((ds = p.getDataOutput()) == null) {
     System.err.println("Something is really wrong: the processor does not have an output DataSource");
     return null;
     DataSink dsink;
     try {
     System.err.println("- create DataSink for: " + outML);
     dsink = Manager.createDataSink(ds, outML);
     dsink.open();
     } catch (Exception e) {
     System.err.println("Cannot create the DataSink: " + e);
     return null;
     return dsink;
Object waitSync = new Object();
boolean stateTransitionOK = true;
* Block until the processor has transitioned to the given state.
* Return false if the transition failed.
boolean waitForState(Processor p, int state) {
     synchronized (waitSync) {
     try {
          while (p.getState() < state && stateTransitionOK)
          waitSync.wait();
     } catch (Exception e) {}
     return stateTransitionOK;
* Controller Listener.
public void controllerUpdate(ControllerEvent evt) {
     if (evt instanceof ConfigureCompleteEvent ||
     evt instanceof RealizeCompleteEvent ||
     evt instanceof PrefetchCompleteEvent) {
     synchronized (waitSync) {
          stateTransitionOK = true;
          waitSync.notifyAll();
     } else if (evt instanceof ResourceUnavailableEvent) {
     synchronized (waitSync) {
          stateTransitionOK = false;
          waitSync.notifyAll();
     } else if (evt instanceof EndOfMediaEvent) {
     evt.getSourceController().stop();
     evt.getSourceController().close();
Object waitFileSync = new Object();
boolean fileDone = false;
boolean fileSuccess = true;
* Block until file writing is done.
boolean waitForFileDone() {
     synchronized (waitFileSync) {
     try {
          while (!fileDone)
          waitFileSync.wait();
     } catch (Exception e) {}
     return fileSuccess;
* Event handler for the file writer.
public void dataSinkUpdate(DataSinkEvent evt) {
     if (evt instanceof EndOfStreamEvent) {
     synchronized (waitFileSync) {
          fileDone = true;
          waitFileSync.notifyAll();
     } else if (evt instanceof DataSinkErrorEvent) {
     synchronized (waitFileSync) {
          fileDone = true;
          fileSuccess = false;
          waitFileSync.notifyAll();
     public static void createInputFiles(Vector files)
          // Create a file for the directory
          File file = new File("images");
          // Get the file list...
          String s[] = file.list();
          files.removeAllElements();     // if any set from arguments
          for(int i=0;i<s.length;i++)
               if(s[i].indexOf(".jp")!=-1)
                    files.addElement("images"+File.separator+s[i]);     // and to sort if required
               else
                    System.out.println((i+1)+": "+s[i]+" - ignored");
public static void main(String args[]) {
     if (args.length == 0)
     prUsage();
     // Parse the arguments.
     int i = 0;
     int width = -1, height = -1, frameRate = 1;
     Vector inputFiles = new Vector();
     String outputURL = null;
     while (i < args.length) {
     if (args[i].equals("-w")) {
          i++;
          if (i >= args.length)
          prUsage();
          width = new Integer(args[i]).intValue();
     } else if (args[i].equals("-h")) {
          i++;
          if (i >= args.length)
          prUsage();
          height = new Integer(args[i]).intValue();
     } else if (args[i].equals("-f")) {
          i++;
          if (i >= args.length)
          prUsage();
          frameRate = new Integer(args[i]).intValue();
     } else if (args[i].equals("-o")) {
          i++;
          if (i >= args.length)
          prUsage();
          outputURL = args[i];
     } else {
          inputFiles.addElement(args[i]);
     i++;
///     createInputFiles(inputFiles);
     if (outputURL == null)// || inputFiles.size() == 0)
     prUsage();
     // Check for output file extension.
     if(!outputURL.endsWith(".avi") && !outputURL.endsWith(".AVI") && !outputURL.endsWith(".mov") && !outputURL.endsWith(".MOV"))
          System.err.println("The output file extension should end with a .mov extension");
          prUsage();
     if (width < 0 || height < 0) {
     System.err.println("Please specify the correct image size.");
     prUsage();
     // Check the frame rate.
     if (frameRate < 1)
     frameRate = 1;
     // Generate the output media locators.
     MediaLocator oml;
     if ((oml = createMediaLocator(outputURL)) == null) {
     System.err.println("Cannot build media locator from: " + outputURL);
     System.exit(0);
     JpegImagesToMovie imageToMovie = new JpegImagesToMovie();
     imageToMovie.doIt(width, height, frameRate, inputFiles, oml, outputURL);
     System.exit(0);
static void prUsage() {
     System.err.println("Usage: java JpegImagesToMovie -w <width> -h <height> -f <frame rate> -o <output URL>");// <input JPEG file 1> <input JPEG file 2> ...");
     System.exit(-1);
* Create a media locator from the given string.
static MediaLocator createMediaLocator(String url) {
     MediaLocator ml;
     if (url.indexOf(":") > 0 && (ml = new MediaLocator(url)) != null)
     return ml;
     if (url.startsWith(File.separator)) {
     if ((ml = new MediaLocator("file:" + url)) != null)
          return ml;
     } else {
     String file = "file:" + System.getProperty("user.dir") + File.separator + url;
     if ((ml = new MediaLocator(file)) != null)
          return ml;
     return null;
// Inner classes.
* A DataSource to read from a list of JPEG image files and
* turn that into a stream of JMF buffers.
* The DataSource is not seekable or positionable.
class ImageDataSource extends PullBufferDataSource {
     ImageSourceStream streams[];
     ImageDataSource(int width, int height, int frameRate, Vector images) {
     streams = new ImageSourceStream[1];
     streams[0] = new ImageSourceStream(width, height, frameRate, images);
     public void setLocator(MediaLocator source) {
     public MediaLocator getLocator() {
     return null;
     * Content type is of RAW since we are sending buffers of video
     * frames without a container format.
     public String getContentType() {
     return ContentDescriptor.RAW;
     public void connect() {
     public void disconnect() {
     public void start() {
     public void stop() {
     * Return the ImageSourceStreams.
     public PullBufferStream[] getStreams() {
     return streams;
     * We could have derived the duration from the number of
     * frames and frame rate. But for the purpose of this program,
     * it's not necessary.
     public Time getDuration() {
     return DURATION_UNKNOWN;
     public Object[] getControls() {
     return new Object[0];
     public Object getControl(String type) {
     return null;
* The source stream to go along with ImageDataSource.
class ImageSourceStream implements PullBufferStream {
     Vector images;
     int width, height;
     VideoFormat format;
     int nextImage = 0;     // index of the next image to be read.
     boolean ended = false;
     float frameRate;
     long seqNo = 0;
     public ImageSourceStream(int width, int height, int frameRate, Vector images) {
     this.width = width;
     this.height = height;
     this.images = images;
          this.frameRate = (float)frameRate;
     format = new VideoFormat(VideoFormat.JPEG,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    Format.byteArray,
                    (float)frameRate);
     * We should never need to block assuming data are read from files.
     public boolean willReadBlock() {
     return false;
byte[] input_buffer;
byte[] imgbytearray;
byte[] imgusebyte;
int camWidth = 320;
int camHeight = 240;
URL url;
long timeStamp;long timeStamp0=System.currentTimeMillis();long resultTimeStamp;
     public boolean urlFetchJPG()
          String ipcamserver = "146.176.65.10";     // examples 146.176.65.10 , 62.16.100.204 , 194.168.163.96 , 84.93.217.139 , 194.177.131.229 , 148.61.171.201
          try
               url = new URL("http://"+ipcamserver+"/axis-cgi/jpg/image.cgi?camera=&resolution=320x240".trim());
          catch(Exception e){System.out.println("Exception url "+e);}
          try
               if(input_buffer==null)input_buffer = new byte[8192];
               if(imgbytearray==null)imgbytearray = new byte[camWidth*camHeight*3];
               URLConnection uc = url.openConnection();
               uc.setUseCaches(false);
               //uc.setDoInput(true);
               //uc.setRequestProperty("accept","image/jpeg,text/html,text/plain");
               BufferedInputStream in;
               int bytes_read;
               int sumread=0;
               in = new BufferedInputStream(uc.getInputStream());
               while((bytes_read=in.read(input_buffer, 0, 8192))!=-1)
                    if(sumread+bytes_read>imgbytearray.length)
                         byte[] imgbytearraytemp = new byte[sumread+bytes_read+8192];
                         System.arraycopy(imgbytearray,0,imgbytearraytemp,0,imgbytearray.length);
                    System.arraycopy(input_buffer,0,imgbytearray,sumread,bytes_read);
                    sumread=sumread+bytes_read;
               in.close();
               imgusebyte = new byte[sumread];
               System.arraycopy(imgbytearray,0,imgusebyte,0,sumread);
          catch(Exception e){System.out.println("Exception urlFetchJPG "+e);}
          return true;
     * This is called from the Processor to read a frame worth
     * of video data.
     public void read(Buffer buf) throws IOException {
     // Check if we've finished all the frames.
     if (nextImage >= 20) //images.size())
          // We are done. Set EndOfMedia.
          System.err.println("Done reading all images.");
          buf.setEOM(true);
          buf.setOffset(0);
          buf.setLength(0);
          ended = true;
          return;
///     String imageFile = (String)images.elementAt(nextImage);
     nextImage++;
//     System.err.println(" - reading image file: " + imageFile);
     // Open a random access file for the next image.
///     RandomAccessFile raFile;
///     raFile = new RandomAccessFile(imageFile, "r");
     byte data[] = null;
     // Check the input buffer type & size.
///     if (buf.getData() instanceof byte[])
///          data = (byte[])buf.getData();
          urlFetchJPG();
          data = imgusebyte;
     // Check to see the given buffer is big enough for the frame.
///     if (data == null || data.length < raFile.length()) {
///          data = new byte[(int)raFile.length()];
          buf.setData(data);
     // Read the entire JPEG image from the file.
///     raFile.readFully(data, 0, (int)raFile.length());
//     System.err.println(" read " + raFile.length() + " bytes.");
     buf.setOffset(0);
///     buf.setLength((int)raFile.length());
          buf.setLength(data.length);
     buf.setFormat(format);
     buf.setFlags(buf.getFlags() | buf.FLAG_KEY_FRAME);
///          long time = (long)(seqNo * (1000D / frameRate) * 1000000);
          timeStamp = System.currentTimeMillis();
          resultTimeStamp = timeStamp - timeStamp0;
          long time = resultTimeStamp * 0xf4240L;
          buf.setTimeStamp(time);
          buf.setSequenceNumber(seqNo++);
     // Close the random access file.
///     raFile.close();
     * Return the format of each video frame. That will be JPEG.
     public Format getFormat() {
     return format;
     public ContentDescriptor getContentDescriptor() {
     return new ContentDescriptor(ContentDescriptor.RAW);
     public long getContentLength() {
     return 0;
     public boolean endOfStream() {
     return ended;
     public Object[] getControls() {
     return new Object[0];
     public Object getControl(String type) {
     return null;
{code}

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3.

Photos won't import images from my Canon camera. When connected, program sees the images, tells me it will import the new ones, then freezes once import starts, not allowing any other operation to happen. MacbookPro 15" 2012, OSX Yosemite 10.10.3. Any suggestions?

Solution discovered. Faulty connector cable. Tried a different one and it worked.

TS3274 If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot.

If I touch camera icon, the screen turns black instead of capturing image. Let me know how to troubleshoot?

Try closing the Camera app:
1. Double-click the Home button to reveal the Task Bar
2. Hold down the Camera app for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Tap area above Task Bar to return to Home screen
If the above doesn't solve the problem, do a reset:
Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider

Open camera and capture image using J2me.

please I want J2me code to open the mobile camera and capture image....
please reply me as quick as possible....(very urgent)...

eng_amy wrote:
please I want J2me code to open the mobile camera and capture image....Well..
eng_amy wrote:
please reply me as quick as possible....(very urgent).....(checks watch) ..it's obviously too late. Never mind.

Capturing images from camera and uploading to sharepoint library automatically.

Hello Everyone,
My requirement is to capturing images from camera and uploading to sharepoint library automatically. No manual uploading will take place.
Please suggest me.
Thanks,
Rajesh

Hi,
From your description, my understanding is that you want to capturing images from camera and uploading to sharepoint library automatically automatically upload images to SharePoint library.
You will save images in your local computer after capturing visitors’ image. You could develop a custom timer job to periodically get pictures from the local folder in your computer. Please refer to this article:
Create and Deploy Custom Timer Job Definition in SharePoint Programatically
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
you could upload pictures to your SharePoint from the folder with C# code, please refer to this article:
How to: Upload a File to a SharePoint Site from a Local Folder
https://msdn.microsoft.com/en-us/library/office/ms454491%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Capture images from Camera directly at high resolution

Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help

Hello Users,
I want to capture images from Camera directly at high
resolution. The problem is that although I am able to capture
images from a Video Object, but the images are small because the
Video size is only 160x120. So if I am able to capture directly
from Camera, I am sure to get a higher resolution images at which
the camera is capturing.
Any help in this matter will be of great help

Can you capture images directly from a fuji camera - Fine Pix S2pro

can you capture images directly from a fuji camera -- Fine Pix S2pro or Fine Pix S2pro to a imac running 10.6.5
camera tethered to the imac

Page 76. Thanks!!!
You can quickly open Camera when the screen is locked by double-clicking the Home button, then tapping .

Error retrieving newly captured image from a camera.

Hello Everyone,
I am developing a user<->digital camera interaction application and I have a
problem with accessing newly captured picture. The thing is I am trying to save
the picture directly to the hard disk(this is possible with the camera I am using).
So normally, as stated in the camera PTP specification, the process can be described
in the following steps:
1). PTP command 'capture' - is send successfully to the camera( the camera captures).
2). Event 'RequestObjectTransfer' of ObjectHandle 0x12345678 - is received from the
camera and processed by my application.
3). GetObjectInfo (of ObjectHandle (0x12345678) ) command should be send to the camera.
4). ObjectInfo - received from the camera.
5). GetObject (of ObjectHandle (0x12345678) command send to camera.
6). Object of ObjectHandle (0x12345678) received from the camera.
7). Event TransferReady.
Everything works fine until I try to ask for the object's info:
- (CFDictionaryRef*) copyObjectPropertyDictionary
OSErr err;
ICACopyObjectPropertyDictionaryPB pb = {};
NSDictionary* dict;
pb.theDict = (CFDictionaryRef *)&dict;
pb.object = 0x12345678;
err = ICACopyObjectPropertyDictionary(&pb, NULL); //(**)
if (noErr != err)
NSLog(@"Error retrieving object info!");
else
return dict; // CFDictionaryRef *
return NULL;
The call (**) in the code above results in "err == -9905(kICAInvalidObjectErr)", so can
anybody tell me where my mistake is because there is obviously one (btw I
wrote the same application for Windows and the id 0x12345678 is recognized there.)

It is an OS X application, the GUI is already done(not all of the controlls are functional,
there are really a lot of them as the camera tend to be 'semi-professional' == 'a lot of
settings'). Actually, what my application can do at this point is read/write settings
from/to the camera, can 'sense' some event notifications, can capture image when the
camera is on external mode(no memory card) and the images are processed to the
'Current User'/Pitures folder and finally can look pretty sexy
The method that gave me headaches for a week or so was the common ICADownloaFile
it was not recognized by this particular camera as was not the 'copyObjectPropertyDictionary'
posted above. Instead I wrote two PTPPassThrough methods which are now accepted by the
Cam.

Camera won't capture image

Similar Messages

Maybe you are looking for