Camera won't start

Used my camera yesterday. Today I get this:
"Could not start the camera. Close other applications and try opening the camera again."
Any help?

With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now, try the camera again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

N97 Camera won't start

Hello everybody,
We I open the lenscover of my n97, the screen turns black (sometimes I see the buttons on the side, but not the option button) and the camera won't start. Also via the menu it doesn't work. The screen stays black and the only way to turn the camaera-application off is to turn the phone off.
I haven't done a hard reset yet, because I hope someone has got the same problem and could solve it easier.
Greetz,
John

if your phone updated to the latest firmware? and you just might have to consider the first two options. make sure you take your battery card out and back up all your data. the first option will restore default settings but you will not lose any data. try that and see what happens.
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

N97 camera won't start(just a black screen)

My N97 camera won't start just a black screen this issue since the update to the new firmware

ooooooooops so sorry about this, here it goes and start with the first code.
With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Curve Camera Won't Start?! Help?

the camera on my Curve won't start, every time I try to open it it says "Could Not Start Camera. Close other applications and try opening the camera again" The only thing is, I don't have any other applications open that I know of and no matter if I turn it off/on, take out the battery, etc the camera just won't start. Any suggestions/solutions? THANKS!

I have a 8320 too and it is doing the same thing after having it 2 weeks! I've tried everything in this thread and other's too and see that a lot of people are having this problem. Surely there is more information available on the cause and solutution. I can't believe there isn't anything on Blackberry's support site!

Lumia 720 camera won't start

After some camera&pictures related updates (maybe Photobeamer) Lumia 720 camera stopped to start.
When trying to open camera it opens quicly and returns back to main screen.
Soft and hard resets are done. Does not help.
Is this sw or hw issue?

Hi:
My camera worked for about a week, then it stopped working. The exact problem:
Both of the cameras (front and back) will open but when I touch the screen to take a photo, the software crashes.
The phone returns to the menu window.
If I try to take a picture with the button, the focus light comes on if I partially press.
But if I completely press the button to take a photo, the software crashes.
I have done both a soft reset (volume down and power until it buzzes and a complete reset (reload the software).
The camera continues to crash.
Please give me some advice, I cannot return the phone to the original source as I am here in the USA and I need the phone for work.

FaceTime won't start because my camera is not switched on. How do I switch the camera on? Am using Mavericks on a MacBook Pro

FaceTime won't start because my camera is not switched on. How do I switch the camera on? Am using Mavericks on a MacBook Pro

You're most welcome, FlutePixzy!
FlutePixzy wrote: ... Apple Care netted nothing... Except they noted I have an older laptop...
If your older laptop meets Apple's published minimum OS X Mavericks: System Requirements, Apple technicians can make it work on your older laptop (if you decide that any service cost is worth the expense.) If so, call Apple Care again and politely ask them how to proceed. Ask to speak with a supervisor or manager if you don't get satisfaction. Limit the discussion to your Mac's problem(s).
Your assessment of Apple's shortcomings are unlikely to help anything.
Technicians may need to inspect your Mac before they can give you an accurate service cost estimate. There may be a separate charge for the inspection of your older Mac, so ask about that, too, if cost is an issue for you.
Message was edited by: EZ Jim
Mac OSX 10.9

When updating my itunes up came: itunes won't start because MSVCR80.dll is missing - try reinstalling. Where the file went I have no idea but, if I re-install will I lose all my purchases?

When updating my itunes on my PC (Windows 7) this message came up: Itunes program won't start because MSVCR80.dll is missing. Try reinstalling to fix this problem.
If I re-install, will I lose all my downloaded songs and other data I've accumulated over time?
Thanks!!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT2729 When I hit camera then try 'Video' the program won't start just photos. What's wrong?

When I hit camera then try 'Video' the program won't start just photos. What's wrong?

Sounds to me like you are trying to tap on the word VIDEO.
To change to video you don't tap on the word VIDEO. Instead, you drag the centre of the screen down. That will change the option from PHOTO to VIDEO.
Of course, to go back to PHOTO or to SQUARE you drag the centre of the screen up.

My iPod won't charge and start, t happened when i came home from camp. it puts the apple sign but it just stays there i tried lots of cords and still won't start, whats going on

My iPod won't start up when my battery died i tried charging it and it won't start. I trird various cables. It has the apple sign on it though. It turns on but stays on the apple sign. I charged it over night too... Doesn't work :(. Please help!

If you are stuck on the Apple log you may need to restore.
Before you do, try this
Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
If that doesn't help, restore:
Restoring iOS Software

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Ok so I updated to iOS 7 on my iPod (5th) it let me update my apps but I cannot download new apps thanks to the terms and conditions. Also my iTunes won't start it just blank, I tried everything I need help

Did you download the new iTunes update that was also released this afternoon? That might be the problem. The new iTunes update came out today as well as the new iOS 7 update and if you haven't downloaded the new iTunes update it may be a compatibility problem so if you didn't, first update to the new iTunes and try again.

I deleted my extensions manager and now my Mac won't start up. Please Help!!

I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
Please help.
Thanks in advance.

Well done! You've succeeded in turning your Mac into a useless brick.
Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
And all to get rid of what sounds like the MacDefender trojan or a variant.
ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
And I doubt your warranty with Best Buy is going to cover user "error."
Message was edited by: noondaywitch

How can I manually set the Camera Roll to start at an arbitrary image number, i.e., IMG_0553.JPG?

I have an iPhone 4s, currently with iOS 5.1. I use it with my desktop computer which runs Windows Vista (and has the latest iTunes installed 10.6), and my laptop, which has Windows 7 and the latest iTunes. I use iCloud and Photo Stream primarily with the desktop computer.
Since receiving the iPhone on launch day, (Nov...14?, 2011), I've had to "Set [it] up as new" twice, most recently this morning.
After setting it up as new, the Camera Roll starts over with pictures at IMG_0001.JPG. That means, that, after my first picture after this latest reset, I'll have three pictures all initially named IMG_0001.JPG, and instead, I'll have IMG_0001.JPG, IMG_0001 (1).JPG, and IMG_0001 (3).JPG in my photo library. This robs me of the ability view my photos sorted by name, which is often the default sort order in my photo folders, and still see them chronologically. I can, of course, sort them by Date Created, but it would be more flexible if I could do either one.
Therefore, I'd like to set Camera Roll to start numbering its photos starting with whatever the next number higher than all the rest in my library would be, in this case, IMG_0553.JPG.
I can't just use Windows to go into the iPhone's Camera Roll and rename the first photo I take to be IMG_0533.JPG. The iPhone just doesn't allow tampering with the filename that way. Can I even count on Camera Roll to note the presence of the highest numbered file in its folder and then just name the next picture taken the next higher number?
Since I have no reason to believe that I won't have to reset the phone again, I'd like for whatever method I find to be one that I can use to set the Camera Roll to start at whatever other number I need when the time comes.
Suggestions welcome...
I have an idea that I'm about to try...I'll report back if it succeeds...
UPDATE: So what I tried to do was, with an empty Camera Roll, I uploaded a picture with the filename and number that I wanted (IMG_0533.JPG) into my Photo Stream, then saved that picture to my Camera Roll, hoping it would retain the file name, and then Camera Roll would just use the next number. That didn't work. It saved into Camera Roll as a brand spanking new IMG_0001.JPG.
Message was edited by: Shadowhawk kTreva

To bring the solution into this thread, here are the consolidated solution bits from the other thread:
I installed i-Funbox and found the file referenced in that other thread ( iPHone / Raw File System / PhotoData / MISC / DCIM_APPLE.plist ).
That file has a section that I'm replicating below that is the part that that original poster edited, and is the part that needs to be edited for my problem also:
<key>DCIMLastFileNumber</key>
<integer>5</integer>
That other thread's original poster wanted his photos to start with 0001, so he set his "DCIMLastFileNumber" to 0.
I wanted my next picture to be IMG_0553.JPG, so I edited my file's 5 to 552.
I did that editing by first copying the file to my laptop (using the Copy To PC command), then opening it up in a text editor. I did the edit, then saved it.
After that, I used i-Funbox' "Copy From PC" command to copy the edited file back to the same location, hoping that the program would take care of any permissions, etc.
I had to do the Copy From PC twice.
On the first try, it seemed to copy just fine, but, for whatever reason, the copied file was empty when I opened it for verification. But I tried again, and that seemed to work (opened for verification, and it was as expected).
I then unplugged it, copied a picture from the Photo Stream to the Camera Roll, then plugged it into my laptop to verify the filename. It was exactly as I wanted: IMG_0533.JPG. Then, for fuller verification, I unplugged it, took a new picture, then replugged it in, and confirmed that the next pictures (I had HDR on) were IMG_0534.JPG and IMG_0535.JPG.
...and that's where I am. Nothing has crashed yet, too, which is all to the good ('course, I haven't done anything else with the phone yet).
Fingers crossed!

Zen Nano Plus WON'T START / RECOVERY / RES

Hello ZNP friends and fellow victims of frustration,
I have the GB Zen Nano Plus and a Windows XP operating system. My Zen is just over 3 months old, and a few days ago I started having the "stuck on Logo or hour glass (building library) problem". Like many of you, it has frustrated me beyond belief in my attempts to correct it. I'm certainly not a computer whiz, but I'm fairly good at following clear, numbered, valid instructions. I have tried many of the offered cures for this problem as provided in the discussion forum. None have worked for me.
I have just stumbled onto/into the fix for the WON'T START / RECOVERY / RESCUE problem. At least, I hope it lasts. The bad news is that I don't know or remember the steps for the cure. The good news is that the problem can be fixed. In the frustration of trying a million variations on the steps offered in the discussion area, I happened to fix my nano plus. I was becoming like a hyper zealot playing a slot machine.
What I do remember is this:
) I did download the application ZenNanoPlus_PCFW_LF___0 and install it, and put an icon on my desktop so I could activate it easily.
2) I did double click it to call it up.
3) I attached my nano plus via USB to the computer. I don't remember if I had to do that before or after bringing up the above application. (You may have to try both.)
4) I did leave the battery out of the nano plus during this operation.
5) I was required to reformat the nano plus which eliminated anything on it. When the instruction came on to reformat, it said "... area" so I was worried that the reformat might include more than the device itself but it didn't.
6) Then I loaded a song, disconnected the device from the computer, put in a battery, and it started fine.
What a task that whole process was! Of course I'm not telling you anything new. I was tempted to just get on with life, but then I thought I should really share this with those of you who have been in the trenches...to let you know that a cure is possible.
Creative should really have a clear set of instructions by now for fixing this problem.
Good luck!
Buck

Have you updated the firmware? this could be the major cause. Also, MP3 has far fewer kinks as a uni'versal format than WMA. If possible, I highly suggest using MP3 on MP3 players.

I killed a MacBook Pro. Shutdown with flash in drive and now it won't start at all.

I may have killed my MacBook Pro OS X by accidentally restarting with a Flash Drive it it and now it won't start at all. Any ideas?

So it is powering on. You did not state that before. In that case:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see this if above doesn't work:
Install OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.
This should install the original version of OS X that came on the machine.

'09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
Please help =[

You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
Doubling the memory does not make your computer run twice as fast.

Camera won't start

Similar Messages

Maybe you are looking for