Camera won't switch to video

Since updating my iOS on iPad I can't use camera for video.

You have to slide the background (up or down, left or right) in order to choose the video camera. I know, it's different and unexpected, but that's how it is. (Tricked me at first, too)

Similar Messages

  • I also have the same issue..whenever i turn the 60 fps mode on the camera freezes while switching from video to any other mode...does everyone have the same issue?

    My 6 plus camera freezes while switching from video to other modes after 60 fps is enabled....does everyone else have the same issue?

    Yup, i have the same issue, i reported this with apple and there is ticket opened for me with
    the engineering section. more that month still not solved. I was hope after update to IOS 8.1.3 to fix!
    But not fixed yet.
    YOu should to report also with apple bro.

  • My camera won't switch screens

    In the camera App, my camera seems to be stuck in selfie view and won't switch. 
    In instagram I can switch, but only the selfie view is focused.

    You'll have to restore then, http://support.apple.com/kb/ht1414

  • Camera will not switch to video

    The camera on both my i-phone 4s and i-pad are stuck on photo and will no longer switch to video.  This happened beginning of February.  How can I resolve this?  They both have the latest operating system except for the last i-phone update that came through this week.

    Thank you.  I should have played with it more!!

  • I upgraded to iPad iOS7.0.2. Now Camera no longer switches to video

    I upgraded my iPad to iOS7.0.2 Now my iPad camera doesn't switch from photo to video. I keep pressing "video" and nothing happens. I push "square", then "Photo", then "Video"  Nothing. No response. Taking a picture works, so does switching from HDR On and Off. Please help!

    You swipe between camera, video and square
    Don't tap or press

  • X6 Camera won't work but video will.

    I can take video's fine but when I change to image mode the screen is black and if I take a picture it throws me out of camera and back to the main screen.
    I had it in for repair as I was cleaning the line along the top and stopped the touch screen from working. I am told that should not affect the camera.
    Is there something I can do or am I going to have to trek back to the shop (not so local).....
    Thanks

    Try restoring the camera settings.. If it didn't work, restore the phone settings.. If it too didn't work, format the phone by dialing *#7370#. If it too didn't work, do a hard reset by switching on the phone by pressing call button, call end button and camera button(it will erase pre installed softwares too! And, in order to do this you should hold those switches until you see the logo of NOKIA).. I hope it will solve your problem....
    If i have helped , kudo me by clicking the white star in left side!

  • Since the ios7 update I go to use my camera and switch to video and it won't switch ! ..why is this ? HELP

    Since the ios7 update I go to use my camera and switch to video and it won't switch ! ..why is this ? HELP

    Thanks stedman1 for continuing to push this interface change news...   I must have taken 100 photos last night (of my shoes) trying to switch to video (unsuccessfully).   Very frustrating.
    OTOH, like many Apple interface innovations, it is simple to learn and easy to remember.  
    Honestly, that's all we can ask for, there really ain't no intuitive. 

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

    I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • I can't get the camera to switch to video on the new iOS7.  Anyone experience this?

    I can't get the camera to switch to video on the new iOS7.  Tapping it, but it's not responding. 
    Anyone experience this?

    Thanks! I went to the new user guide.  Have to slide screen to choose function

  • FaceTime won't start because my camera is not switched on. How do I switch the camera on?  Am using Mavericks on a MacBook Pro

    FaceTime won't start because my camera is not switched on. How do I switch the camera on?  Am using Mavericks on a MacBook Pro

    You're most welcome, FlutePixzy!
    FlutePixzy wrote: ... Apple Care netted nothing... Except they noted I have an older laptop...
    If your older laptop meets Apple's published minimum OS X Mavericks: System Requirements, Apple technicians can make it work on your older laptop (if you decide that any service cost is worth the expense.)  If so, call Apple Care again and politely ask them how to proceed.   Ask to speak with a supervisor or manager if you don't get satisfaction.  Limit the discussion to your Mac's problem(s).
    Your assessment of Apple's shortcomings are unlikely to help anything.
    Technicians may need to inspect your Mac before they can give you an accurate service cost estimate.  There may be a separate charge for the inspection of your older Mac, so ask about that, too, if cost is an issue for you.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.

    I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.  Any suggestions?

    Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
    Remember - swipe up or down to get to the mode that you want to use.

  • My screen stays in landscape mode watching Netflix and won't switch to portrait like all other video sites (Amazon Prime) does. Any way to fix?

    My screen stays in Landscape mode watching Netflix and won't switch to Portrait like other video sites like Amazon Prime does.  It is not locked so I don't know why this happening.  Any help is appreciated.

    I can't swear to this because I do not have the Netflix app, but I believe that the most recent upgrade to the app requires you to watch the movies in landscape mode now and it cannot be changed.

  • ITunes won't play quicktime videos on Mac anymore.

    I'm using 10.7.3
    iTunes 10.6
    MacBook Pro 2.6Ghz 4GB ram
    iTunes won't play my video anymore and it's been a while I'm not sure when it occured if it's after an update to snow leopard or iTunes updates...
    When I double click a video I get "This movie requires QuickTime, which is not supported by this version of iTunes." ??
    ...and cannot convert the option doesn't work I get this other message when trying to convert a version for APPLE TV in advanced menu "None of the selected files were converted because they could not be found."??
    But the movies are quicktime movies in my library and the MPEG-4 plays in iTunes but not on APPLE TV.
    From all my videos I get one only going through APPLE TV and when I try opening it it says error occured why opening and never works??
    It seems APPLE is regularly messing things up in updates to loose people so they have to pay for tech support, I didn't upgrade to iPhoto 11 and cannot import anything anymore into it so my entire library is a dead one ; not a cool way to do business than messing people software so they have to buy newer versions!!!
    Any specialists that know how to fix this ??

    The 32-bit solution has never, I repeat, never worked for me.  I've even done a full reinstall on a clean drive of OSX Lion with a fresh install of iTunes downloading a video of "The Big Bang Theory" that just came out this last thursday and still get the error (just finished the full reinstall to a clean drive now and, no, I didn't do any backup restores.)
    The only solution I've found is to remove the video from iTunes, without deleting the file, then import the file back into iTunes.
    Switching to 32-bit iTunes to run the file causes iTunes to tell me it needs to open iTunes to play the file then it sits and waits for itself to open until I cancel the process.  The video then plays without audio.
    I have noticed that I can stream the files to my Apple TV to play even while getting the error trying to play them on the computer I downloaded the files onto.
    As a result of this error, I've had to reduce the amount of content I purchase from iTunes.  no more buying whole seasons at a time unless I do it at the start of the season.  Even then, I'm reconsidering it.  The amount of work required to get the files into a playable status on the computer is simply too great on an on-going basis.

Maybe you are looking for

  • T1 parametric test

    Hi, NI engineers, i have a question about your t1 parametric test. I need for my final proyect degree develop a system for E1 parametric test and my big problem are the two cards used in t1 parametric test. I need to know are two cards used in this p

  • SAP XI and ESA

    Hi guys, Does anyone have any good material / suggestions on what to cover under the following topics for XI relating to an ESA: 1) BPM/BPEL modelling 2) integration with adapaters and routings 3) integration for business activity monitoring 4) creat

  • Issues with K8N Neo4 Platinum Socket 939 and Athlon64 3000+ Venice

    Hello everyone, I am planning a long overdue upgrade of my system. Right now I'm looking at the K8N Noe4 Platinum (non SLI) mobo with a Athlon 64 3000+ Venice CPU. I haven't seen any posts saying NO DON'T PUT THESE TOGETHER but then maybe I've missed

  • Sleep after the security update

    I just installed the March 1, 2006 security update on my imac (10.4.5, 2GHz G5 20"). Since then, it's had trouble sleeping - sometimes I need to select SLEEP 2-3 times before it kicks in. Anyone else see this kind of behavior change? - J iMac G5   Ma

  • How do I know in advance if the firefox is releasing a new version of browser? I want to know pre-release

    I am in IT industry and our products are browser based. Wanted to know how do I know pre release of firefox browser so I can keep pace with the updates and align my resources.